Effect of mixing ratio on bactericidal action of MgO–CaO powders

MgO–CaO powders were prepared with different molar ratios (MgO/CaO) at 1400 °C for 2 h in air. By using the powder samples obtained, the change in bactericidal effect as a function of MgO–CaO composition was studied by colony count method. From the XRD measurements, it was found that CaO solid solution was formed by the replacement of Mg²⁺ ion with larger Ca²⁺ ion. However, no formation of MgO solid solution was observed. The average particle size and the specific surface area of the samples used in this study were about 0.2 m and 10.5m²g^–1, respectively. The pH values of physiological saline containing powder samples increased with the increase of CaO content, and the value reached 12.1 in sample with the molar ratio (MgO/CaO) of 0.25. From the results of bactericidal tests for Staphylococcus aureus, it was found that the bactericidal effect increased with the increase of CaO content in the samples.     

Novel circular-beam equalizing techniques that use graded-index fiber optics for a high-power laser diode

We demonstrate a novel method of equalizing a laser diode (LD) beam into a circular beam. This method uses the twist effect of graded index (GI) fiber optics. An asymmetric LD beam with beam qualities of M2 = 500 in the slow axis and M2 = 4 in the fast axis is converted successfully into a symmetric circular beam with a beam quality of M2 = 175. The circular-output beam with 92% coupling efficiency from the fiber input to the fiber output is obtained with a 5-m-long GI1200 (1200 means a core diameter of 1200 microm) fiber for a 2-W LD array. We extend the experiments to a higher-power source with higher asymmetric beam qualities of M2 = 3000 and M2 = 4. By slightly bending the GI10000 (10000 means a core diameter of 10,000 microm) fiber, we have succeeded in generating a symmetric beam with a improved beam quality of M2 = 2000. The average beam quality is preserved when the asymmetric ratio is not high, and the beam quality degradation ratio is investigated up to asymmetric ratios of 750.     

Efficiency and polarization performance of a multilayer-coated laminar grating in the 6.5-6.9-nm wavelength region

We applied a Mo/B4C multilayer coating to a laminar holographic grating with 2400 grooves/mm and a 1-m radius of curvature. By use of synchrotron soft x rays the multilayer-coated grating was evaluated to have diffraction efficiencies of 3.1% and 0.017% for s- and p-polarized radiation, respectively, at a 6.7-nm wavelength at a 45.35 degrees grazing angle of incidence in the +1 (inside) grating order. Thus the polarizance was estimated to be 98.9% at least. The zero-order peak was suppressed by the destructive interference caused by the groove profile.     

Training of a leaning agent for navigation--inspired by brain-machine interface.

The design clue for the remote control of a mobile robot is inspired by the Talwar's brain-machine interface technology for remotely training and controlling rats. Our biologically inspired autonomous robot control consciousness-based architecture (CBA) is used for the remote control of a robot as a substitute for a rat. CBA is a developmental hierarchy model of the relationship between consciousness and behavior, including a training algorithm. This training algorithm computes a shortcut path to a goal using a cognitive map created based on behavior obstructions during a single successful trial. However, failures in reaching the goal due to errors of the vision and dead reckoning sensors require human intervention to improve autonomous navigation. A human operator remotely intervenes in autonomous behaviors in two ways: low-level intervention in reflexive actions and high-level ones in the cognitive map. Experiments are conducted to test CBA functions for intervention with a joystick for a Khepera robot navigating from the center of a square obstacle with an open side toward a goal. Their statistical results show that both human interventions, especially high-level ones, are effective in drastically improving the success rate of autonomous detours.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Production of eicosapentaenoic acid by a recombinant marine cyanobacterium, Synechococcus sp.

The eicosapentaenoic acid (EPA) synthesis gene cluster from an EPA-producing bacterium, Shewanella sp. SCRC-2738, was cloned into a broad-host range vector, pJRD215, and then introduced into a marine cyanobacterium, Synechococcus sp. NKBG15041c, by conjugation. The transconjugant cyanobacteria produced 3.7±0.2% (2.24±0.13 mg/L) EPA (n-3) and 2.5 ±0.2% (1.49±0.06 mg/L) eicosatetraenoic acid (n-3) of the total fatty acids when the cells were cultured at 23°C at a light intensity of 1,000–1,500 Lux. The EPA and eico-satetraenoic acid contents of the cells were increased to 4.6±0.6% (3.86±1.11 mg/L) and 4.7±0.3% (3.86±0.82 mg/L), and 7.5±0.3% (1.76±0.10 mg/L) and 5.1±0.2% (1.19±0.06 mg/L) when they were cultured at low temperature (18°C) and at lower light intensity (40 Lux), respectively.     

Questionnaire of cryopreserved allograft valves in Kyushu and Yamaguchi area

Japanese Society of Cryopreserved Thoracic Tissue Implantation was recently set up. Cryopreserved allograft valves are about to pervade in Japan. To clarify the interest, demands and supply of cryopreserved allograft valve in the area of Kyushu and Yamaguchi, we performed questionnaire investigation regarding this issue. Collection rate of this questionnaire was 87.5% (35/40 hospitals). Ninety-seven percent of the hospitals answered that they were interested in cryopreserved allograft. Ninety-four percent of the hospitals answered that they did not ethically hesitate to use cryopreserved allograft. Ninety-one percent of the hospitals hoped to perform cardiac surgery using allograft aortic valve if allograft is available. With respect to securing donors of allograft, two-third of the hospitals did not decide whether they could be involved in obtaining donors of allograft. As the number of the cadaver kidney donors is about 20 per year in the area of Kyushu and Yamaguchi, shortage of donors of allograft valve is anticipated.     

Quantum Statistics of Three-Dimensional Vortex Filament in Superfluid 4He

The quantum statistics of three-dimensional vortex filament in superfluid ⁴ He is investigated by the use of path integral techniques. The free energy evaluated in the saddle point approximation decreases abruptly at a certain critical value of the applied superflow velocity. This critical behavior is in quantitative agreement with the experimental result of vortex nucleation by a moving ion. The dissipation effects are also discussed within the damped harmonic oscillator approximation.     

Distribution of double bonds in thermally degraded polyisobutylene

The distribution of double bonds in thermally degraded polyisobutylene was determined quantitatively by using pulsed Fourier transform ¹H n.m.r. spectroscopic analysis. The double bonds in the degraded polymer did not exist in the interior but at the terminal positions of the polymer chain. These olefins were of the terminal trisubstituted and terminal vinylidene types. The content of the former was much greater than that of the latter. This shows that radical chain transfer predominantly occurs at the methylene hydrogen rather than at the methyl groups of the polymer chain. The average number of double bonds per molecule, f, was greater than 1 and tended to be near 2. Thereby most of the degraded polyisobutylene was shown to have two terminal unsaturations per molecule.