Mirror Constant for Tyranno® Silicon-Titanium-Carbon-Oxygen Fibers Measured in Situ in a Three-Dimensional Woven Silicon Carbide/Silicon Carbide Composite

The strength, S , of ceramic and glass fibers often can be estimated from fractographic investigation using the fracture mirror radius, r _m, and the relationship S = A _m/( r _m)^1/2, where A _mis the "mirror constant." The present work estimates the value of A _mfor Tyranno^® Si-Ti-C-O fibers in situ in a three-dimensional woven SiC/SiC-based composite to be 2.50 ± 0.09 MPa·m^1/2. This value is within the range of 2–2.51 MPa·m^1/2 previously obtained for nominally similar Nicalon^® Si-C-O fibers.     

Prostaglandin-like substances formed during autoxidation of methyl linolenate

Prostaglandin-like substances other than 3-(2-ethyl-5-hydroxy-3-oxo)-cyclopentanyl-2-propenal (compound I), which upon reacting with amino acids form reddish pigments, were purified, and their chemical structures were determined. Three red pigment-forming substances (RPS) in autoxidized methyl linolenate were purified successively by gel chromatography on Sephadex LH-20, column chromatography and thin layer chromatography on Silica Gel 60, and by high performance liquid chromatography on μ-Porasil. IR spectra of the RPS showed the absorption of an ester group (νC=O 1730 cm⁻¹ in CHCl₃) and of a longer branched chain (νC-H 2800–3100 cm⁻¹), in addition to the absorption bands observed in compound I. Electron impact mass spectra of the trimethylsilyl ethers obtained after reduction with NaBH₄ and NaBD₄ were analyzed in detail and compared with those of compound I. The structures of the RPS were identified as stereoisomeric methyl 8-[2-(2-formylvinyl)-3-hydroxy-5-oxo-cyclopentanyl]-octanoates derived from methyl 12-hydroperoxy-linolenate. Presented at the general meeting of the Japanese Society of Scientific Fisheries, held at Tohoku University, Sendai, Japan, October 1984.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Template synthesis of novel porous carbons using various types of zeolites

As previously reported, high surface area microporous carbons with long-range order can be synthesized by using zeolite Y as a template. In this work, an attempt is made to synthesize porous carbon using several other types of zeolites (zeolite β, ZSM-5, mordenite and zeolite L). Special attention is paid to whether the structural regularity of each zeolite can be transferred to the carbon structure as well as with the case of zeolite Y. The carbon filling method was then examined to see which gives the highest regularity to the carbon structure. It has been found that the optimum carbon filling method for zeolite Y is not an optimum one for the other zeolites and the degree of the regularity of long-range ordering in the carbons strongly depends on zeolite type. The order of the regularity in the resultant carbons is zeolite β>>zeolite L>mordenite>ZSM-5. The effect of zeolite type on the regularity is discussed in relation to the size and the shape of the zeolite channels.     

Antioxidant effects of chlorophyll and pheophytin on the autoxidation of oils in the dark. I. Comparison of the inhibitory effects

The effects of chlorophyll and pheophytin on the autoxidation of oils in the dark were investigated by oven tests. The results indicated that both chlorophyll and pheophytin show antioxidant activity when methyl linoleate is used as substrate. Furthermore, chlorophyll retarded the oxidative deterioration of triglycerides in rapeseed and soybean oils at 30 C. Among the four chlorophyll derivatives (chlorophylls a and b and pheophytins a and b), chlorophyll a showed the strongest antioxidant activity. The antioxidant effects of chlorophyll and pheophytin depended on the storage temperature and the kinds of oil used as substrate.     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

Critical temperature for production of MAG by esterification of different FA with glycerol using <Emphasis Type="Italic">Penicillium camembertii</Emphasis> lipase

Production of MAG by a lipase-catalyzed reaction is known to be effective at low temperature. This phenomenon can be explained by assuming that synthesized MAG are excluded from the reaction system because MAG, which have low m.p., are solidified at low temperatures. Consequently, MAG are efficiently accumulated and do not serve as the precursor of DAG. If this hypothesis is correct, the critical temperature for MAG production, defined as the highest temperature at which DAG synthesis is repressed, should depend on the m.p. of the MAG. Esterification of FFA with glycerol using Candida rugosa, Rhizopus oryzae, and Penicillium camembertii lipases produced MAG efficiently at low temperatures. However, Candida lipase showed very low esterification activity at high temperatures (>20°C), and Rhizopus lipase produced not only MAG but also DAG even at low temperatures. Meanwhile, P. camembertii lipase catalyzed synthesis of MAG only from FFA and glycerol at low temperatures, although the enzyme catalyzed synthesis of DAG from MAG in addition to synthesis of MAG at high temperatures. We thus studied the effect of temperature on esterification of C₁₀−C₁₈ FFA with glycerol using Penicillium lipase as a catalyst and determined the critical temperatures for production of MAG. The critical temperature for production of each MAG showed a linear correlation with m.p. of the MAG, which supported the hypothesis. In addition, because the m.p. of MAG are estimated from that of the constituent FA, the optimal temperature for production of MAG can be predicted from the m.p. of the FFA used as a substrate.     

Preparation of Aluminum Nitride Powder from Aluminum Polynuclear Complexes

AIN powder was synthesized from aluminum polynuclear complexes. Basic aluminum chloride and basic aluminum lactate were used as the aluminum polynuclear complexes. These starting materials and glucose were dissolved in water and mixed homogeneously. AIN powder was obtained by calcining after drying and precalcining at 800°C under nitrogen gas flow. Then excess carbon was removed by firing in air. Nitridation in the system was investigated and compared with that in the alumina–carbon black system. It was found that in our reaction system nitridation began and proceeded at lower calcination temperatures above 1200°C than in the alumina–carbon black system. Using aluminum polynuclear complexes, AIN was synthesized through the nitridation of γ-alumina and produced in a very fine and sharp particle size distribution.     

A new maritime lifesaving multiple-effect solar still design

This paper presents a new maritime lifesaving multiple-effect solar still design where several extended wicks feed seawater to their evaporating areas by capillary force, and the resulting water vapor diffuses and condenses on facing wicks with the condensate flowing through the wicks into storage bags. A theoretical analysis showed that a temperature drop through diffusion layers between evaporating and condensing wicks slowly increases in the main evaporating areas and rapidly near salt depositions whereas the evaporation rate decreases slowly in the main area and rapidly near salt depositions. These changes are caused by increases in salt concentrations and resulting boiling point elevation. With steady-state transfer analysis, the proposed still is predicted to produce about 15 kg m ⁻²d⁻¹ fresh water on a sunny day of 22 MJm⁻²d⁻¹ solar radiation, showing a potential to be a maritime lifesaving desalinator.