Durability of radiation-sterilized polymers III. Oxidation layer determined by chemiluminescence

Chemiluminescence (CL) analysis was used for determining the oxidation layer formed by the irradiation of polypropylene for medical supplies. The depth of the oxidation layer from the surface depended on dose rate and increased with decreasing dose rate. The oxidation occurred remarkably at a region near the surface area of the film where the diffusion of oxygen is more sufficient. On the contrary, there was very little oxidation in the interior portion. The oxidation layers of polypropylene samples irradiated with electron beam showed U-shaped profiles in the cross-section of film as did as a sample irradiated with γ-rays. However, the degree of oxidation by irradiation with electron beam was very small; CL intensity at the surface area was only one-third that for the γ-irradiated samples.     

Contrasting effects of water-soluble and water-insoluble dietary fibers on bile acid conjugation and taurine metabolism in the rat

The effect of the type of dietary fiber on the bile acid and taurine metabolism was examined in rats. Diets containing 10% of various water-soluble fibers (citrus pectin, konjak mannan, guar gum) as compared to a fiber-free diet increased biliary excretion of total bile acids. In contrast, water-insoluble dietary fibers (cellulose, corn bran, chitin; 10% in the diets) as well as cholestyramine (5% in the diet) considerably, decreased bile acid excretion. Water-soluble dietary fibermediated increases in bile acid excretion were totally attributable to increases in glycine-conjugates. Thus, these fibers greatly increased by the bile acid glycine-to-taurine ratio (G/T). Excretio of glycine conjugates decreased more than that of taurine conjugates in rats fed various water-insoluble dietary fibers. As a results, G/T in rats fed water-insoluble fibers was significantly lowered as compared to G/T in animals fed a fiber-free diet. Cholestyramine did not affect the G/T ratio of bile acids. Fecal bile acid excretion and the activities of hepatic cholesterol 7α-hydroxylase (EC 1.14.13.17) in rats fed various water-soluble dietary fibers approximately doubled as compared to the respective values for rats fed a fiber-free diet. Whereas cholestyramine greatly increased these parameters, water-insoluble fibers did not significantly affect them. Various water-soluble fibers decreased hepatic concentration and urinary excretion of taurine as well as the activity of hepatic cysteine dioxygenase (EC 1.13.11.20). In contrast, water-insoluble fibers considerably increased hepatic taurine concentrations and enzyme activities. The parameters for taurine metabolism were unaffected by cholestyramine. It was suggested that the types of dietary fiber affected hepatic taurine synthesis and thus modified bile acid glycine/taurine ratios.     

Liver phosphatidylcholine hydroperoxidation provoked by ethionine-containing choline-deficient diet in mice

It is shown that peroxidation of phosphatidylcholine (PC) is enhanced in liver of mice fed a hepatocarcinogenic choline-deficient diet containing 0.1% w/w ethionine. Mice were divided into 4 groups and fed for 3 weeks one of the following diets: choline-supplemented; choline-supplemented containing ethionine; choline-deficient; and choline-deficient containing ethionine. Phosphatidylcholine hydroperoxide (PCOOH) of liver lipids was measured by high performance liquid chromatography using a chemiluminescence detector. Mice fed a choline-deficient diet containing ethionine showed 6-fold higher PCOOH levels than the choline-supplemented control mice: the PCOOH/PC molar ratios of liver lipids were 32.3×10⁻⁵ and 5.6×10⁻⁵, respectively. In addition to this remarkable degree of lipid peroxidation in liver of mice fed the choline-deficient diet containing ethionine, we also observed a significant liver fatty infiltration, a decrease in plasma and liver α-tocopherol, and an increase in liver injury-indicative enzyme activities. Also, marker enzymes for hepatocarcinogenesis, glucose-6-phosphatase and γ-glutamyl transpeptidase were affected. These data suggest that enhanced hydroperoxidation of phosphatidylcholine may participate in hepatocarcinogenesis provoked by choline deficiency in the presence of ethionine.     

Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

Correlation of reactivity to hydrogenation and chemical structure of lignites

Three North Dakota lignites with almost the same percentage carbon have been used to determine the relation between chemical structure and reactivity to hydrogenation. Average structural indices of the lignites were estimated using the pyridine-soluble products after alcohol-alkali treatment, the structural indices obtained at various reaction times being extrapolated to zero reaction time. Hydrogenation was influenced by the average structure, with the lignite having higher aromaticity, higher molecular weight of the pyridine extract from the alcohol-alkali reaction product, larger aromatic ring size and lower content of aliphatic structure, showing a smaller degree of conversion.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Modeling of distribution parameter,void fraction covariance and relative velocity covariance for upward steam-water boiling flow in vertical rod bundle

In order to improve the prediction accuracy of one-dimensional interfacial force formulated by ‘Andersen’ approach, the distribution parameter in a drift–flux correlation, void fraction covariance, and relative velocity covariance has been modeled for dispersed boiling two-phase flow in a vertical rod bundle. The distribution parameter has been derived by a bubble-layer thickness model. The correlations of void fraction covariance and relative velocity covariance have been developed based on prototypic 8 × 8 rod bundle data. The correlation of void fraction covariance agrees with the bundle data with the mean absolute error, standard deviation, mean relative deviation, and mean absolute relative deviation being 0.00120, 0.0415, ?0.173%, and 1.80%, respectively. The correlation of relative velocity covariance agrees with the bundle data with the mean absolute error, standard deviation, mean relative deviation, and mean absolute relative deviation being ?0.00241, 0.0452, ?0.0316%, and 2.52%, respectively. In view of the great importance of void fraction covariance and relative velocity covariance on the one-dimensional interfacial drag force formulation, it is highly recommended to include the void fraction covariance and relative velocity covariance in the one-dimensional formulation of interfacial drag force used in nuclear thermal-hydraulic system analysis codes.     

Basic information on new regulatory criteria requiring on-site emergency preparedness for accelerator facilities in Japan

For basic information on new regulatory criteria, the dose rate around a thick target bombarded by proton, electron, or carbon beam having incident energy of 10 MeV–50 GeV (per nucleon in case of carbon) was simulated using the PHITS Monte Carlo code. Based on this simulation, the benchmark which is ‘1 Sv/h at 1 m away from the beam line’ assuming 1% beam loss was evaluated, and compared with the criteria in France and Canada. Based on this evaluation, a new regulatory criteria has been established for requiring on-site emergency preparedness for accelerator facilities in Japan, which is required for the ion accelerator beyond the ion beam of 100 MeV/nucleon and 0.5 kW beam power, and the electron accelerator beyond the electron beam of 50 MeV energy and 1 kW beam power.     

Code performance with improved two-group interfacial area concentration correlation for one-dimensional forced convective two-phase flow simulation

In gas–liquid two-phase flow simulation for reactor safety analysis, interfacial momentum transfer in two-fluid model plays an important role in predicting void fraction. Depending on flow conditions, a shape of the two-phase interface complicatedly evolves. One of the proposed approaches is to quantify the gas–liquid interface information using interfacial area transport equation. On the other hand, a more simplified and robust approach is to classify bubbles into two-groups based on their transport characteristics and utilize constitutive equations for interfacial area concentration for each group. In this paper, interfacial drag model based on the two-group interfacial area concentration correlations is implemented into system analysis code, and void fractions were calculated for the evaluation of numerical behaviors. The present analysis includes (1) comparison of one-group and two-group relative velocity models, (2) comparison with separate effect test database, (3) uncertainty evaluation of drag coefficient, (4) numerical stability assessment in flow regime transition, and (5) transient analysis for simulating the prototypic condition. Results showed that utilization of interfacial drag force term using constitutive equations of two-group interfacial area concentration yields satisfactory void fraction calculation results. The proposed solution technique is practical and advantageous in view of reducing the computational cost and simplifying the solution scheme.     

Development of a transparent single-grid-type micro-strip gas chamber based on LCD technology

The liquid crystal display (LCD) technology allows several simple circuits to be built using thin film transistors, thus making fabrication of compact, integrated, large-area, and low-cost micro-pattern gaseous detectors possible. In this work, a single-grid-type micro-strip gas chamber (S-MSGC) using transparent electrodes based on the LCD technology was fabricated and successfully operated in several gas mixtures. The detector was coupled with a multi-pixel photon counter to detect an optical signal through the transparent substrate in Ar/CF₄ gas. Both electrical and optical signals were measured and the light yield of the detector was acquired. Successful operation of the S-MSGC can be considered the very important first step for development of the next target of integrated devices.