Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.     

Hydrogen absorption characteristics of Pd1−xLix (x = 0.055 and 0.072) alloys and ordered Pd7Li

Thermodynamic quantities were determined for the absorption of hydrogen in Pd-5.5at.%Li and Pd-7.2at.%Li alloys, the latter alloy being in the two-phase field of saturated -Pd(Li,s) solid solution and the ordered Pd₇Li phase. Data were also determined for the Pd-10.6at.%Li alloy which consists only of the ordered Pd₇Li phase. The data were determined from measurements of pressure-composition isotherms at temperatures between 273 K and 463 K and hydrogen pressures up to 1000 Torr. The Pd---Li alloys dissolve considerable amounts of hydrogen and form a more stable hydride phase than Pd despite the lattice contraction which occurs on alloying Pd with Li. The hydrogen solubility in the ordered Pd₇Li phase alone is a little smaller than that in the two-phase mixture. The large hydrogen absorption of Pd---Li alloys, which does not depend on the presence of ordered Pd₇Li, may be attributed to (i) an attractive H---Li pair interaction, (ii) a decrease in the strain energies necessary for hydrogen occupation of the interstices, because of the similar lattice parameters of the -Pd(Li,s) and ordered Pd₇Li phases, and the large compressibility of Pd---Li alloys, and (iii) the valence of 1 of Li in Pd compared with 3 for, for example, Y in Pd.     

Preparation and structural characterization of perovskite-type LaxLn1−x″CoO3 by the thermal decomposition of heteronuclear complexes, LaxLn1−x″| Co(CN)6| · nH2O (Ln″ = Sm and Ho)

Perovskite-type La_xLn_1−x″CoO₃ oxides are prepared by the thermal decomposition of La_xLn_1−x″ [Co(CN)₆] · nH₂O hetero-nuclear complexes. Except for LaCoO₃ (hexagonal), the structures observed for La_xSm_1−xCoO₃ are othorhombic. While the perovskite-type oxide HoCoO₃ is not formed by decomposition at 1000°C of the corresponding hexacyano complex, the partial replacing of Ho with La is effective in forming the pervoskite-type oxide having an orthorhombic structure containing Ho even at 800°C. A monotonous correlation (quasi-linear relationship) was found between the b- and c-lattice constants of the orthorhombic structures of the perovskite-type oxides and the effective radii of Ln ions, defined as r_eff = xr_1.a + (1 − x)r_1.0″. The distortion parameter for the orthorhombie cell (3″a/b−1) increaseswith decrease in r_eff and is expected to be 0.270 for perovskite-type HoCoO₃. The crystal structure of the La_xLn_1−x″, CoO₃ oxides is mainly controlled by the effective radii of Ln ions.     

Parallelized fusion visualization system

The speed-up of supercomputers has increased the complexity of simulations. To analyze such kind of data, we believe that new types of visualization software are needed. Therefore, we have been developing a visualization system called “Fusion Visualization”, and the progresses were reported in the AROB 18th and 19th International Symposiums. We introduced the overall concept at the AROB 18th International Symposium, and then demonstrated a sample of flow visualization in a blood vessel in the AROB 19th International Symposium. To extend our system to enable the handling of larger data, we have implemented the proposed system on a parallelized visualization system; AVS/Express PCE (Parallel Cluster Edition). This paper describes the implementation and the benchmark results.     

Design and performance of a punch mechanism based pellet injector for alternative injection in the large helical device

A low speed single barrel pellet injector, using a mechanical punch device has been developed for alternative injection in the large helical device. A pellet is injected by the combined operation of a mechanical punch and a pneumatic propellant system. The pellet shape is cylindrical, 3 mm in diameter and 3 mm in length. Using this technique the speed of the pellet can be controlled flexibly in the range of 100-450 m/s, and a higher speed can be feasible for a higher gas pressure. The injector is equipped with a guide tube selector to direct the pellet to different injection locations. Pellets are exposed to several curved parts with the curvature radii R(c) = 0.8 and 0.3 m when they are transferred in guided tubes to the respective injection locations. Pellet speed variation with pressure at different pellet formation temperatures has been observed. Pellet intactness tests through these guide tubes show a variation in the intact speed limit over a range of pellet formation temperatures from 6.5 to 9.8 K. Pellet speed reduction of less than 6% has been observed after the pellet moves through the curved guide tubes.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

The Effectiveness of Latent Semantic Analysis for Building Up a Bottom-up Taxonomy from Folksonomy Tags

In this paper, we evaluate the effectiveness of a semantic smoothing technique to organize folksonomy tags. Folksonomy tags have no explicit relations and vary because they form uncontrolled vocabulary. We discriminates so-called subjective tags like “cool” and “fun” from folksonomy tags without any extra knowledge other than folksonomy triples and use the level of tag generalization to form the objective tags into a hierarchy. We verify that entropy of folksonomy tags is an effective measure for discriminating subjective folksonomy tags. Our hierarchical tag allocation method guarantees the number of children nodes and increases the number of available paths to a target node compared to an existing tree allocation method for folksonomy tags.     

An optimum design of robotic food handling by using Burger model

This paper discusses an optimum design approach on robotic food handling by considering the characteristics of viscoelasticity of object. We pick up a traditional Japanese food, “Norimaki” as a typical example with the viscoelastic characteristics. We first show that the dynamic characteristics of Norimaki can be expressed by utilizing the Burger model. After testing the parameter sensitivity, we show an example of the optimum design for determining the combination of the hand stiffness and the operating velocity. We further show that the resultant plastic deformation can be formulated with the exact solution.