The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.     

Preparation of Metal-Coated Carbon Fiber Reinforced Composites and Their Electromagnetic Properties

Medium temperature curing by infrared radiation was used to prepare electromagnetic wave absorbing multilayered plastic matrix composite materials containing metal-coated carbon fibers (MCFs). The electromagnetic properties of the materials were investigated by frequency scanning tests with microwave vector network analyzer. It is found that the electromagnetic parameters, mainly permittivity of the composites increase significantly with the addition of MCFs, which gives the composites good designability as thin, light-weight EM wave absorbers. It is also shown that MCFs can improve on the EM wave energy attenuating property of the composites by widening the work frequency band width and raising the absorptive peak     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

The bone marrow stromal environment is a major factor in myeloma cell resistance to dexamethasone

The expression of several markers of epithelial cell proliferation was analyzed to establish baseline data for future chemoprevention studies of oral premalignant lesions. Punch biopsies (n = 60) from three different sites of oral mucosa (bucca, lateral tongue, and the floor of the mouth) were obtained from 20 normal donors of both sexes. After formaldehyde fixation and paraffin embedding, immunohistochemistry was used to detect the proliferation markers Mib-1, cyclin D1, and centromere-associated protein CENP-F. Analysis of sections stained for the three markers showed similar patterns, i.e., a low labeling index (LI) in the basal layer and a high LI in the parabasal layer at all three intraoral sites. No proliferative activity was seen above the parabasal layer (superficial layer). All sites showed similar Mib-1 LI values for the proliferative markers. The tongue epithelium exhibited higher parabasal LIs of cyclin D1 and CENP-F than did the other two sites. No significant differences were detected between smokers and nonsmokers. The data from normal mucosa were compared with those from low (n = 30)- and high (n = 17)-grade dysplastic leukoplakias. The Mib-1 LI showed a very significant change, with a 9-fold increase in the basal layer LI in dysplastic leukoplakias. Cyclin D1 and CENP-F showed similar trends with increments of up to 7-fold in the basal layer of high-grade dysplasia. Although the proliferative activity of the parabasal layer was similar in normal and leukoplakic epithelia, the superficial layer showed a significant increment in proliferative activity mainly in high-grade leukoplakia. These studies suggest that proliferation markers in the basal and superficial cells of premalignant lesions may serve as surrogate end point biomarkers for chemoprevention trials.     

Separating inviscid flows

Summary The separating flow of an inviscid fluid is not only a limit solution of the steady separating, laminar fluid flow at high values of the Reynolds number but it is also part of its structure (Smith [1], [2]). This work aims at reexamining the separating flow of inviscid fluid past a bluff body which is fixed in an otherwise uniform stream of fluid. For the purpose of this paper we will assume that the bluff body is a circular cylinder but the theory is applicable to bodies of any shape. It is further assumed that the fluid is in steady two-dimensional motion and is inviscid and of constant density. The flow structure is assumed to consist of a separated flow region, caviting flows in which there exists a free surface on which the pressure is constant, and a wake. A twin spiral vortex model is used in order to determine the shape of the free streamline. Based on the free streamline theory the problem reduces to solving a mixed boundary value problem and a Hilbert solution for the inverse problem in the auxiliary plane is obtained. When we consider the flow in the physical plane the problem is transformed into a direct problem in which the geometry of the solid body is given in advance. We assume that the separation is smooth and thus the curvature of the free streamline at the point of free detachment be equal to that of the body surface. A numerical method for solving the two-dimensional potential flows past arbitrarily shaped curved bluff bodies is developed.When the cavitation number is zero the angle of separation is approximately 55° and the computed results predict that the position of the separation point will move backward as the cavition number increases. The relationships between the drag coefficient, and the width and length of the cavity is determined and is found to be in very good agreement with the predictions of Smith [1].     

Removal of E. coli and helminth eggs in UASB: Polishing pond systems in Brazil.

Ponds following anaerobic reactors, such as Upflow Anaerobic Sludge Blanket (UASB) reactors, have been termed polishing ponds in the literature. The present paper analyses the removal of E. coli and helminth eggs in five UASB-polishing pond systems in Brazil. Since there were ponds in series, the total number of ponds was 10. The ponds had average retention times varying from 2 to 21 days, and depths ranging from 0.40 to 2.00 m. The shallow ponds in series, even with low retention times, were able to produce effluents complying with the coliform WHO guidelines for unrestricted irrigation (< or = 1000 MPN/100 ml). An equation for the coliform decay coefficient was proposed: Kb (dispersed flow) = 0.710H(-0955) (20 degrees C). The equation highlights the inverse relationship between the pond depth and the decay coefficient. All polishing pond systems were able to produce effluents with helminth eggs concentrations predominantly equal to zero, and satisfying the WHO guidelines for unrestricted and restricted irrigation (< or = 1 egg/L, arithmetic mean). The approximate range of helminth eggs removal efficiency was predicted satisfactorily.     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

井站安全培训之问题与对策

目前采气井站的安全教育培训工作取得了一定成绩,但也存在不少问题。针对这些问题,提出了3点对策建议:制定长期系统的安全培训计划;建立教育培训信息反馈机制;培训方法不断改进与创新。     

Complete mobile email management

Years have lapsed since the inauguration of the first Wireless Application Protocol (WAP) application. One of the main reasons for the lukewarm response so far may be attributed to the lack of a “Killer” application. Many companies and developers have attempted to replicate email services (an Internet Killer appplication) within the WAP realm, but till now, no significant success has been reported. This paper will first discuss on the key functions which are lacking in the present WAP-email service, and which are arguably necessary if a much larger user base is to be attracted to these services. A new system will be proposed which can enable the user to send files residing in a remote personal computer (PC) as attachments to his emails using WAP-enabled mobile devices. The implementation of the system will be presented in details. Issue relating to the connection to various types of email servers and the security of the system will also be addressed in the paper.     

An Investigation on Noisy Environments in Evolutionary Multiobjective Optimization

In addition to satisfying several competing objectives, many real-world applications are also characterized by a certain degree of noise, manifesting itself in the form of signal distortion or uncertain information. In this paper, extensive studies are carried out to examine the impact of noisy environments in evolutionary multiobjective optimization. Three noise-handling features are then proposed based upon the analysis of empirical results, including an experiential learning directed perturbation operator that adapts the magnitude and direction of variation according to past experiences for fast convergence, a gene adaptation selection strategy that helps the evolutionary search in escaping from local optima or premature convergence, and a possibilistic archiving model based on the concept of possibility and necessity measures to deal with problem of uncertainties. In addition, the performances of various multiobjective evolutionary algorithms in noisy environments, as well as the robustness and effectiveness of the proposed features are examined based upon five benchmark problems characterized by different difficulties in local optimality, nonuniformity, discontinuity, and nonconvexity