The Effects of Embedded Dipoles in Aromatic Self‐Assembled Monolayers

Using a representative model system, here electronic and structural properties of aromatic self‐assembled monolayers (SAMs) are described that contain an embedded, dipolar group. As polar unit, pyrimidine is used, with its orientation in the molecular backbone and, consequently, the direction of the embedded dipole moment being varied. The electronic and structural properties of these embedded‐dipole SAMs are thoroughly analyzed using a number of complementary characterization techniques combined with quantum‐mechanical modeling. It is shown that such mid‐chain‐substituted monolayers are highly interesting from both fundamental and application viewpoints, as the dipolar groups are found to induce a potential discontinuity inside the monolayer, electrostatically shifting the core‐level energies in the regions above and below the dipoles relative to one another. These SAMs also allow for tuning the substrate work function in a controlled manner independent of the docking chemistry and, most importantly, without modifying the SAM‐ambient interface.     

An advanced VHDL‐AMS PiN diode model: towards simulation‐based design of power converters

This paper focuses on the modeling of a power PiN diode. The focal point basis is the dependence on temperature. The PiN diode remains a difficult device to model mainly during switching transients. An advanced PiN diode temperature‐dependent model is developed and implemented in VHDL‐AMS. Heterogeneous simulation scheme including the circuit wiring parasitic components, the probe effects and the dependent diode models is successfully simulated using SIMPLORER simulator. Experimental data of several commercial PiN diodes are compared to simulation results at different temperature levels. A good rate of consistency is found. Copyright © 2014 John Wiley & Sons, Ltd.     

Deterministic models for assessing productivity and cost of bored piles

The assessment process of productivity and cost of bored pile construction is dictated by unseen subsurface obstacles, lack of contractor experience and site planning. These problems complicate the estimator's role in evaluating pile equipment productivity and cost. Current research discusses the assessment of piling process productivity and cost using the deterministic technique. Data are collected through questionnaires, site interviews and telephone calls to experts in various construction companies. Many variables have been considered in the piling construction process, such as pile size, depth, pouring method, soil type and construction method. Five deterministic models have been designated to assess productivity, cycle time and cost. The developed models are validated whereas 79% of the outputs have been predicted with more than 75% accuracy. Consequently, three sets of charts have been developed to provide the decision‐maker with a solid planning, scheduling and control tool for piling projects. If a pile has 60′ depth with φ‐18 (18″ diameter pile) in clay soil using a 5′ auger height, the cycle time is estimated as 56 and 65.5 minutes; however, productivity is 6 and 5 holes/day for dry and wet methods, respectively.     

Fusarium graminearum Infection Strategy in Wheat Involves a Highly Conserved Genetic Program That Controls the Expression of a Core Effectome

Fusarium graminearum, the main causal agent of Fusarium Head Blight (FHB), is one of the most damaging pathogens in wheat. Because of the complex organization of wheat resistance to FHB, this pathosystem represents a relevant model to elucidate the molecular mechanisms underlying plant susceptibility and to identify their main drivers, the pathogen’s effectors. Although the F. graminearum catalog of effectors has been well characterized at the genome scale, in planta studies are needed to confirm their effective accumulation in host tissues and to identify their role during the infection process. Taking advantage of the genetic variability from both species, a RNAseq-based profiling of gene expression was performed during an infection time course using an aggressive F. graminearum strain facing five wheat cultivars of contrasting susceptibility as well as using three strains of contrasting aggressiveness infecting a single susceptible host. Genes coding for secreted proteins and exhibiting significant expression changes along infection progress were selected to identify the effector gene candidates. During its interaction with the five wheat cultivars, 476 effector genes were expressed by the aggressive strain, among which 91% were found in all the infected hosts. Considering three different strains infecting a single susceptible host, 761 effector genes were identified, among which 90% were systematically expressed in the three strains. We revealed a robust F. graminearum core effectome of 357 genes expressed in all the hosts and by all the strains that exhibited conserved expression patterns over time. Several wheat compartments were predicted to be targeted by these putative effectors including apoplast, nucleus, chloroplast and mitochondria. Taken together, our results shed light on a highly conserved parasite strategy. They led to the identification of reliable key fungal genes putatively involved in wheat susceptibility to F. graminearum, and provided valuable information about their putative targets.     

Field Performance of High Oleic Soybeans with Mutant FAD2-1A and FAD2-1B Genes in Tennessee

Soybean [Glycine max (L.) Merr.] oil with high oleic acid (>75%) has increased oxidative stability and health benefits that are valuable for food, fuel, and industrial products. It has been determined that two naturally occurring mutations in genes FAD2-1A and FAD2-1B can combine to produce high oleic soybeans. The objective of this study was to test the effect of these mutant alleles on seed yield and oil and protein concentration. Molecular markers assisted in the creation of a population of 48 BC₃F_2:4 lines (93.75% expected genome commonality). Each line was classified into one of four genotypic groups where both FAD2-1A and FAD2-1B genes were either homozygous wild type or mutant, respectively. Twelve lines for each genotypic group were evaluated in three replications at six locations across Tennessee. There was no seed yield difference between the high oleic genotypic group and the other groups (P < 0.05). On the other hand, there were differences in fatty acid profiles and oil and protein concentrations. In combination, the mutant FAD2-1A and FAD2-1B alleles produced a mean of 803.1 g kg⁻¹ oleic acid. This is, on average, approximately 500 g kg⁻¹ more oleic acid compared to soybean lines with only one mutant FAD2-1 allele. The high oleic double mutant group had more total oil (228.0 g kg⁻¹) and protein (401.0 g kg⁻¹) compared to all other genotypic groups (P < 0.05). Overall, this specific combination of mutant FAD2-1A and FAD2-1B alleles appears to generate conventional high oleic soybeans without a yield drag.     

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.     

Comments on solid state hydrogen storage systems design for fuel cell vehicles

In recent years, significant research and development efforts were spent on hydrogen storage technologies with the goal of realizing a breakthrough for fuel cell vehicle applications. This article scrutinizes design targets and material screening criteria for solid state hydrogen storage. Adopting an automotive engineering point of view, four important, but often neglected, issues are discussed: 1) volumetric storage capacity, 2) heat transfer for desorption, 3) recharging at low temperatures and 4) cold start of the vehicle. The article shall help to understand the requirements and support the research community when screening new materials.     

Effect of cooking and germination on phenolic composition and biological properties of dark beans (Phaseolus vulgaris L.)

Legumes are the base´s diet in several countries. They hold a high nutritional value, but other properties related to human health are nowadays being studied. The aim of this work was to study the influence of processes (boiling or germination) on the phenolic composition of dark beans (Phaseolus vulgaris L. c.v. Tolosana) and their effect on their antioxidant, neuroprotective and anticancer ability. Phenolic composition of raw and processed dark beans was analysed by HPLC-PAD and HPLC–ESI/MS. The antioxidant activity was evaluated by ORAC. Astrocytes cultures (U-373) have been used to test their neuroprotective effect. Anticancer activities were evaluated on three different cell lines (renal adenocarcinoma (TK-10), breast adenocarcinoma (MCF-7) and melanoma (UACC-62)) by sulphorhodamine B method. Qualitative and quantitative differences in phenolic composition have been observed between raw and processed dark beans that influence the antioxidant activity, mainly for germinated samples which show a decrease of antioxidant capacity. Although every assayed extracts decreased reactive oxygen species release and exhibited cytotoxicity activities on cancer cell lines, raw beans proved to be the most active in neuroprotective and antitumoral effects; this sample is especially rich in phenolic compounds, mainly anthocyanins. This study further demonstrated that phenolic composition of dark beans is related with cooking process and so with their neuroprotective and anticancer activity; cooking of dark beans improves their digestion and absorption at intestinal level, while maintaining its protective ability on oxidative process at cellular level.