Control of nano-sized interlayer space of lamellar vanadyl benzylphosphate

Nano-sized interlayer space of lamellar vanadyl benzylphosphate was controlled by water content in starting solution. Depending on the water content, three types of lamellar vanadyl benzylphosphate having basal spacings of 1.4 nm, 1.9 nm and 2.3 nm were obtained. It was suggested that the difference in the concentrations of benzyl and hydroxyl groups in the interlayer leads to the variation of the interlayer space.     

Fast pyrolysis kinetics of expanded polystyrene foam

Fast pyrolysis of polymers, biomass and other substances is of great interest in various applications. For example, in the lost foam casting process, kinetic information about expandable polystyrene (EPS) decomposition under extremely high‐heating rate conditions is essential for further process development. A simple laboratory‐scale fast pyrolysis technique has been developed and demonstrated for elucidation of EPS decomposition kinetics. Pyrolysis experiments were performed at different reaction temperatures. The cumulative gaseous yields were determined using a flame ionization detector (FID) connected in series with the fast pyrolysis reactor. The governing equations for a semibatch reactor type were modified and applied to obtain kinetic parameters (activation energies and the pre‐exponential rate constants) for the EPS decomposition process. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Development and Integration of Sub-hourly Rainfall–Runoff Modeling Capability Within a Watershed Model

Increasing urbanization changes runoff patterns to be flashy and instantaneous with decreased base flow. A model with the ability to simulate sub-daily rainfall–runoff processes and continuous simulation capability is required to realistically capture the long-term flow and water quality trends in watersheds that are experiencing urbanization. Soil and Water Assessment Tool (SWAT) has been widely used in hydrologic and nonpoint sources modeling. However, its subdaily modeling capability is limited to hourly flow simulation. This paper presents the development and testing of a sub-hourly rainfall–runoff model in SWAT. SWAT algorithms for infiltration, surface runoff, flow routing, impoundments, and lagging of surface runoff have been modified to allow flow simulations with a sub-hourly time interval as small as one minute. Evapotranspiration, soil water contents, base flow, and lateral flow are estimated on a daily basis and distributed equally for each time step. The sub-hourly routines were tested on a 1.9 km² watershed (70% undeveloped) near Lost Creek in Austin Texas USA. Sensitivity analysis shows that channel flow parameters are more sensitive in sub-hourly simulations (Δt = 15 min) while base flow parameters are more important in daily simulations (Δt = 1 day). A case study shows that the sub-hourly SWAT model reasonably reproduces stream flow hydrograph under multiple storm events. Calibrated stream flow for 1 year period with 15 min simulation (R ² = 0.93) shows better performance compared to daily simulation for the same period (R ² = 0.72). A statistical analysis shows that the improvement in the model performance with sub-hourly time interval is mostly due to the improvement in predicting high flows. The sub-hourly version of SWAT is a promising tool for hydrology and non-point source pollution assessment studies, although more development on water quality modeling is still needed.     

Congener-specific carbon isotopic analysis of technical PCB and PCN mixtures using two-dimensional gas chromatography-isotope ratio mass spectrometry

Analysis of stable carbon isotope fractionation is a useful method to study the sources and fate of anthropogenic organic contaminants such as polychlorinated biphenyls (PCBs) in the environment. To evaluate the utility of carbon isotopes, determination of isotopic ratios of 13C/12C in source materials, for example, technical PCB preparations, is needed. In this study, we determined delta13C values of 31 chlorobiphenyl (CB) congeners in 18 technical PCB preparations and 15 chloronaphthalene (CN) congeners in 6 polychlorinated naphthalene preparations using two-dimensional gas chromatography-combustion furnace-isotope ratio mass spectrometry (2DGC-C-IRMS). Development of 2DGC-IRMS enabled improved resolution and sensitivity of compound-specific carbon isotope analysis (CSIA) of CB or CN congeners. Delta13C values of PCB congeners ranged from -34.4 (Delors) to -22.0/1000 (Sovol). Analogous PCB preparations with similar chlorine content, but different geographical origin, had different delta13C values. PCB preparations from Eastern European countries--Delors, Sovol, Trichlorodiphenyl, and Chlorofen--had distinct delta13C values. PCB mixtures showed increased 13C depletion with increasing chlorine content. Delta13C values for individual CB congeners varied depending on the degree of chlorination in technical mixtures. Delta13C values of CN congeners in Halowaxes ranged from -26.3 to -21.7/1000 and these values are within the ranges observed for PCBs. This study establishes the range of delta13C values in technical PCB and PCN preparations, which may prove to be useful in the determination of sources of these compounds in the environment. This is the first study to employ 2DGC-IRMS analysis of delta13C values in technical PCB and PCN preparations.     

Multielemental analysis of purpleback flying squad using high resolution inductively coupled plasma-mass spectrometry (HR ICP-MS)

Forty-four elements were analyzed in 21 tissues of purpleback flying squid, Sthenoteuthis oualaniensis, by high resolution inductively coupled plasma-mass spectrometry (HR ICP-MS) and inductively coupled plasma atomic emission spectrophotometry (ICP-AES). Greater concentrations of V, Fe, Co, Ni, Cu, Ag, Cd, Pb, and Bi were found in liver, pancreas, and ink sac than in other tissues. Ink sac concentrated remarkable levels of Ca and Sr in addition to the above-mentioned elements. Several alkalis, alkaline earth, and rare earth elements preferentially accumulated in muscle. Among the hard tissues, accumulation of V and U in beak, Ni, Zn, and Cd in gladius and Cr in skin was prominent. K, Rb, Cs, Pb, Bi and some transition elements (V, Co, Cu, Zn, Ag, Cd) were significantly (p < 0.05) higher in the livers of adult than in juvenile squids. Sodium, alkaline earth, and rare earth elements were higher in the livers of juveniles than in adult squids.     

Thermal shock and thermal fatigue study of ceramic materials on a newly developed ascending thermal shock test equipment

A test equipment was designed to study thermal shock and thermal fatigue of ceramic materials subjected to fast heating (ascending). The equipment was designed to generate thermal stress in a test specimen by heating one surface of it by an oxy-hydrogen flame while cooling the opposite surface. The sample cracked when thermal stress exceeded its mechanical strength. The in situ crack formation was detected by an acoustic emission system coupled to the set up. The hot zone temperature was measured by an infra red pyrometer. The equipment was also designed to run thermal fatigue test cycles in automatic mode between two selected temperatures. The temperature and thermal stress distribution in the test specimen were modelled using finite element software. The effect of temperature distribution of the top and bottom surfaces on thermal stresses was studied. It was observed that the thermal stress is very sensitive to the temperature distribution on the top surface and maximum near the periphery of the top surface. This was in agreement with the experimental results in which the cracks were originated from the periphery of top surface. It was also observed that the failure temperature was higher for thicker samples.     

CO adsorption in PdxCoyXz (X = Au,Mo, Ni) tertiary alloy nanocatalysts for PEM fuel cells—a theoretical analysis

Application of tertiary alloy nanoparticles is becoming more important, however, the local structure of such alloyed particles, which is critical for tailoring their properties, is not yet very clearly understood. In this study, we present detailed theoretical analysis on the atomistic structure and CO adsorption in Pd₇₀Co₂₀X₁₀ (X=Au, Mo, Ni) tertiary composite alloys for their application in fuel cells toward oxygen reduction reaction (ORR). Basic structure and the most stable configurations for all the three composites are determined. Quantum mechanical approaches and classic molecular dynamics methods are applied to model the structure and to determine the lowest energy configurations. Our theoretical results agree well with the experimental results of XRD patterns. Considering those structures as the base, simulations were performed to determine the magnitude of CO poisoning. The results obtained by ab‐initio calculations allow us to estimate the CO‐tolerance that these catalysts might have, along with those obtained for Pd‐Co‐Ni (70:20:10 atom %) tertiary alloy, and compared with commercial Pt (1 1 0) catalyst. From these results, a comparison has been made to show different CO adsorption strengths. This is the first step to fabricate an efficient engineering design that allows us to obtain high‐performance, low‐cost nanostructured catalysts. Copyright © 2010 John Wiley & Sons, Ltd.     

Biological decolourization of C.I. Direct Black 38 by E. gallinarum

In the present study, an Enterococcus gallinarum strain was isolated from effluent treatment plant of a textile industry based on its ability to decolourize C.I. Direct Black 38 (DB38), a benzidine-based azo dye. Effects of dye concentration and medium composition on dye decolourization were studied. The strain was found to decolourize DB38 even under aerobic conditions. Kinetics of DB38 decolourization was also examined, and V(max) and K(s) of decolourization were found to be higher in Luria broth (12.8 mg l(-1)h(-1) and 490.6 mg l(-1)) than in minimal medium (4.09 mg l(-1)h(-1) and 161.84 mg l(-1)). However, decolourization rate/biomass was found to be higher in minimal medium than in Luria broth, indicating greater decolourization efficiency of biomass in the former. The study also revealed biodegradation of DB38 to benzidine and its further deamination to 4-aminobiphenyl (4-ABP) by the culture. Ammonia released during this process was used as nitrogen source for growth of the culture.     

SignText: a web-based tool for providing accessible text book contents for Deaf learners

Universal Access in the Information Society - Lack of Sign Language-based learning tools is a hindrance in acquiring knowledge for deaf students. Technology-based tools have introduced innovative...     

A Mechanism for Carbon Depletion at Bondline of High-Frequency Electric-Resistance-Welded X70 Pipeline Steel

Metallurgical and Materials Transactions A - The bondline of electric-resistance-welded (ERW) linepipe steel, often etched white (i.e., ferrite) in optical microscopy, is generally believed to be...