Feedback control procedure for energy efficiency optimization of microwave-heating ovens

This paper presents an automatic calibration procedure that permits to industrial or domestic microwaves ovens working at optimal energetic efficiency conditions. This method is based on a low-power iterative measurement of the microwave oven scattering parameters for several sample locations to find the most efficient position by measuring energy reflections at feeding ports and the coupling between them for each sample position. These low-power measurements have been validated through high-power microwave-heating tests showing that, at the optimal estimated position, microwave absorption and therefore temperature increment is maximum. The method provides good matching levels independently of the sample geometry and permittivity without the need of any external matching device.     

Hydrodynamic cavitation to improve bulk fluid to surface mass transfer in a nonimmersed ultraviolet system for minimal processing of opaque and transparent fluid foods

ABSTRACT:  Ultraviolet (UV)-induced chemical reactions and inactivation of microorganisms in transparent and opaque fluids are strongly dependent upon the homogenous exposure of the target species to the UV irradiation. Current UV technologies used in water disinfection and food preservation applications have limited efficacy due to suspended particles shading target species. An Ultraviolet-Shockwave Power™ Reactor (UV-SPR) consisting of an inner rotating rotor and a stationary quartz housing and 2 end plates was used to induce 'controlled cavitation.' Eight UV low-pressure mercury lamps spaced uniformly were installed lengthwise around the quartz housing periphery. A KI to I ₃⁻chemical dosimeter for UV was used to quantify photons received by fluid in the annular space of the SPR. UV dose (J/m²) increased from 97 J/m² at 0 rpm to over 700 J/m² for SPR speeds above 2400 rpm. Inactivation of E. coli 25922 in apple juice and skim milk in the UV-SPR at exit temperatures below 45 °C was greater than 4.5 and 3 logs, respectively. The UV-SPR system proved successful in increasing the mass transfer of transparent and opaque fluid to the UV irradiated surface.     

Combining Invariant Features and the ALV Homing Method for Autonomous Robot Navigation Based on Panoramas

Biologically inspired homing methods, such as the Average Landmark Vector, are an interesting solution for local navigation due to its simplicity. However, usually they require a modification of the environment by placing artificial landmarks in order to work reliably. In this paper we combine the Average Landmark Vector with invariant feature points automatically detected in panoramic images to overcome this limitation. The proposed approach has been evaluated first in simulation and, as promising results are found, also in two data sets of panoramas from real world environments.     

The effect of daily-activity patterns on crash involvement

The main purpose of this study is to analyze the effect of daily-activity and travel patterns on the risk of crash involvement. To this end, we develop a model that integrates daily-activity and travel choices in a single framework, recognizing that these variables affect the risk of crashes. This model can therefore provide predictions of the expected changes in risk levels from the implementation of measures that affect the daily-activity patterns and the socio-economic characteristics of the population.The empirical analysis makes use of data collected during a household survey that includes crash information and trip diaries. The model is applied in a case study of an Arab town in Israel to analyze various transportation policies. The results of this research show that in addition to individuals’ demographic and socio-economic characteristics, their daily-activity and travel patterns also have an impact on the risk of being involved in car crashes. The case study showed the potential of this framework for analyzing the effect of various social and transportation policies on road safety. To the best of our knowledge, this is the first time such relationships have been tested by using a disaggregate model and the first time activity-based models have been used to analyze exposure to the risk of road crashes.     

Miracidial infectivity of Hypoderaeum conoideum (Trematoda: Echinostomatidae): differential susceptibility of two lymnaeid species

A study was made of the infectivity of Hypoderaeum conoideum miracidia to a range of laboratory-reared specimens of freshwater snail species (Lymnaea peregra, L. corvus, Physella acuta, and Gyraulus chinensis) that coexist with the parasite in the same natural habitat. L. peregra and L. corvus were found to be equally susceptible to the parasite when specimens of each snail species were singly exposed to miracidia. However, when miracidia could choose either lymnaeid species, they showed a high degree of specificity toward L. peregra. The results obtained suggest that H. conoideum miracidia are capable of distinguishing among these lymnaeids in their orientation to the host. This indicates that miracidia might achieve specificity before actually contacting the snail host and suggests that during the host-snail orientation process they respond to signals different from those generated upon snail contact and invasion. The specificity toward L. peregra observed in H. conoideum miracidia seems to indicate adaptation to the snail community in their natural habitat, resulting in enhancement of their transmission.     

Numerical simulation of dam construction using low-CO<Subscript>2</Subscript>-emission concrete

Cement production gives rise to CO₂ emissions generated by the calcination of CaCO₃ and by the combustion of fossil fuels, being responsible for about 5% of the global CO₂ emissions. These emissions can be substantially reduced if cement replacement materials are used. In this paper two residual ashes that can be used as mineral additions are considered: sugar cane bagasse ash and rice husk ash. A case study of the construction of a dam with a blended material composed by cement and these two ashes is presented, indicating the potentiality of its use for civil engineering applications. The analyses were performed using experimental and numerical tools developed on the basis of a thermo-chemo-mechanical model. This model considers the coupling, within the theory of thermodynamics, of the several phenomena that intervene in the hydration process, namely, exothermicity, thermo-activation, chemo-plasticity, evolution of thermal and mechanical properties with the hydration reaction, which includes creep and relaxation.     

Performance evaluation of cement mortars modified with metakaolin or ground brick

The work analyzes the performance of mortars prepared with two metakaolin samples and ground calcined-clay brick. Complete stress–strain deformation response under compression, porosity, sorptivity, pore size distribution and resistance to penetration of chloride ions have been determined for mortars with up to 40% cement replacement. Continuum damage mechanics analyzes using a scalar model allowed to extract information on the mode of deformation leading to failure of the mortars during compressive loading. It is shown that not only the ultimate strength, but also the pre-peak deformation response is influenced by calcined-clay addition. The ultimate strength of the mortar mixture depended on the type of calcined-clay added, but in all cases mortars with addition were marginally more compliant during the elastic deformation stage and more brittle as fracture approached.     

Granulocytic sarcoma presented as a reactivation of chronic myeloid leukemia after allogenic marrow transplantation

The authors report the case of a chronic myeloid leukemia (CML) patient submitted to allogenic bone marrow transplantation, who had probably never entered complete remission. The disease was reactivated as a granulocytic sarcoma, next to a platinum plate installed to correct a tibia fracture 11 years earlier. Its final event was a myeloid Ph1 + blastic crisis that was unsuccessfully treated with high doses of sc interferon and citarabine.