Contrasts between organic participation in apatite biomineralization in brachiopod shell and vertebrate bone identified by nuclear magnetic resonance spectroscopy

Unusually for invertebrates, linguliform brachiopods employ calcium phosphate mineral in hard tissue formation, in common with the evolutionarily distant vertebrates. Using solid-state nuclear magnetic resonance spectroscopy (SSNMR) and X-ray powder diffraction, we compare the organic constitution, crystallinity and organic matrix–mineral interface of phosphatic brachiopod shells with those of vertebrate bone. In particular, the organic–mineral interfaces crucial for the stability and properties of biomineral were probed with SSNMR rotational echo double resonance (REDOR). Lingula anatina and Discinisca tenuis shell materials yield strikingly dissimilar SSNMR spectra, arguing for quite different organic constitutions. However, their fluoroapatite-like mineral is highly crystalline, unlike the poorly ordered hydroxyapatite of bone. Neither shell material shows ¹³C{³¹P} REDOR effects, excluding strong physico-chemical interactions between mineral and organic matrix, unlike bone in which glycosaminoglycans and proteins are composited with mineral at sub-nanometre length scales. Differences between organic matrix of shell material from L. anatina and D. tenuis, and bone reflect evolutionary pressures from contrasting habitats and structural purposes. The absence of organic–mineral intermolecular associations in brachiopod shell argues that biomineralization follows different mechanistic pathways to bone; their details hold clues to the molecular structural evolution of phosphatic biominerals, and may provide insights into novel composite design.     

Color reproduction on varnished cardboard packaging by using lower ink coverages due to the gray component replacement image processing

Even in these challenging times, cardboard packaging industry is increasing its revenue with stable annual increase prediction, but customers are increasing demands on the packaging with respect to environmental protection, attractiveness, and branding. This article aims to determine the influence of image processing in terms of gray component replacement and overprint varnishing on the color reproduction on a cardboard packaging material. A test chart with tertiary colors was defined and modified by different gray component replacement levels. It was printed in accordance with ISO norm on coated and uncoated cardboard and finished by overprinting water based, offset, and UV varnish. The prepared samples were evaluated by measuring surface coverage, tone value increase (dot gain) of primary colors and calculating ΔE₀₀ of defined tertiary colors. The results showed that gray component replacement application reduces ink consumption. Higher gray component replacement applied results in lower ink surface coverage, but the decrease is also dependent on the image content. The TVI (dot gain) is significantly influenced only by applying UV varnish, resulting with higher TVI. The color differences of the tertiary colors showed that increased level of the gray component replacement applied did not cause significant color differences, even decreased color difference in some cases. Additionally, applying gray component replacement decreased color differences in “reddish” part of the gamut. This research proved that lowering the ink consumption due to the gray component replacement will not cause significant differences in the color reproduction. Furthermore, varnishing with commercial offset or water-based varnish will not cause higher deviations in color reproduction, but use of the UV varnish would.     

Droplet Size Distribution Obtained by Atomization with Two‐Fluid Nozzles in a Spray Dryer

The possibility of predicting the droplet size distribution from the particle size distribution was investigated. For that purpose, suspensions of different types of materials were dried in a laboratory‐scale spray drier. Drying of suspensions was performed with different sizes of two‐fluid nozzles. Droplet size distribution was evaluated from the data obtained for spray drying of bismuth molybdate suspension. The method was validated experimentally with other tested materials. Investigated systems involve processes of drying, crystallization, and coating. The proposed methodology can be applied when nonagglomerated particles, spherical particles, or spherical agglomerates were obtained by spray drying.     

Self-assembled fibrillar polyethylene crystals with tunable properties

Due to its simple linear chain structure, crystal morphology of linear low-density polyethylene (LLDPE) fibers can be controlled to fulfill the needs of diverse advanced applications. This study presents a simple two-step method to produce LLDPE fibers with self-assembled fibrillar crystals and highly oriented amorphous phase. Rather than conventional melt spinning, fibers were treated in a two-step eco-friendly bath without drawing after extruded fibers emerge from the spinneret. Treated fibers through the baths demonstrated lower crystallinity, but significantly higher degree of crystal orientation when compared to control fibers of traditional melt spinning. Morphological analysis revealed that a unique microstructure was formed after spinning through a two-step eco-friendly bath. As-spun fibers demonstrated spherulitic morphology which can be transformed into a fibrillar structure followed by post-drawing process. Cross sectional images of the treated LLDPE fibers produced at 400 m/min showed fibrillar PE crystals which can be more dominant upon post-drawing. After two-step bath treatment, produced fibers need low draw ratios to exhibit high performance. Our novel modification followed by hot drawing process can manipulate internal structure with performance of PE fibers to an outstanding level of 0.35 GPa strength and 3 GPa modulus at a production speed of 400 m/min.     

A fast closed-loop process dynamics characterization

Stable, integrating and unstable processes, including dead-time, are analyzed in the loop with a known PI/PID controller. The ultimate gain and frequency of an unknown process G_p(s), and the angle of tangent to the Nyquist curve G_p(iω) at the ultimate frequency, are determined from the estimated Laplace transform of the set-point step response of amplitude r₀. Gain G_p(0) is determined from the measurements of the control variable and known r₀. These estimates define a control relevant model G_m(s), making possible the use of the previously determined and memorized look-up tables to obtain PID controller guaranteeing desired maximum sensitivity and desired sensitivity to measurement noise. Simulation and experimental results, from a laboratory thermal plant, are used to demonstrate the effectiveness and merits of the proposed method.     

Influence of turkey meat on residual nitrite in cured meat products

A response surface experimental design was employed to estimate residual nitrite level at various initial nitrite concentrations, percent turkey meat in the formula, and heat quantity (F) values using a typical wiener as the test system. Pork and mechanically separated turkey were used as the meat ingredients. Residual nitrite and pH were measured at day 1, 7 days, 14 days, and 49 days after processing. Protein, fat, salt, moisture, and CIE (L*a*b*) color values were also determined. Results showed that the effect of turkey meat on residual nitrite level was significant (P < 0.01). An increased amount of turkey meat in the formula resulted in lower residual nitrite levels at a fixed pH. The residual nitrite level was initially proportional to initial nitrite concentration, but it became a nonsignificant factor during longer storage time. Differences in heat quantity had a significant effect (P < 0.05) on residual nitrite level initially. Greater heat quantity decreased residual nitrite level in finished cured meat products at a fixed pH. However, this effect became nonsignificant during longer storage. Reduction of residual nitrite in wieners because of turkey meat addition at a fixed pH was due to characteristics of the turkey tissue, but the mechanism of action remains unknown. It was also established that commercial wieners had a higher pH if poultry meat was included in the formulation.     

Lipid Oxidation in Poultry Döner Kebab: Pro-oxidative and Anti-oxidative Factors

ABSTRACT: The effect of mechanically separated turkey (MST), ascorbate, and vacuum packaging on rates of lipid oxidation in chicken döner kebab during storage at 4 °C or -20 °C was investigated. MST and MST/ascor-bate accelerated lipid oxidation compared to control kebab. Ascorbate application and vacuum packaging inhibited lipid oxidation. The antioxidative effect of ascorbate in the absence of MST was converted to a pro-oxidative effect in the presence of MST. This suggests that the excess lipid hydroperoxides and iron complexes in MST were activated as lipid oxidation catalysts by ascorbate to overwhelm the ability of ascorbate to inhibit lipid oxidation at lower concentrations of hemoglobin, iron, and peroxides.     

A second-order two-scale homogenization procedure using C^{1} macrolevel discretization

The present study deals with a second-order two-scale computational homogenization procedure for modeling deformation responses of heterogeneous materials at small strains. The macro to micro transition and the application of generalized periodic boundary conditions on the representative volume element (RVE) at the microlevel are investigated. The structure at macroscale level is discretized by the \(C^{1}\) two dimensional triangular finite elements, while the \(C^{0}\) quadrilateral finite element is used for the discretization of the RVE. The finite element formulations and the new proposed multiscale scheme have been implemented into the finite element software ABAQUS using user subroutines derived. Due to the \(C^{1}-C^{0}\) continuity transition, an additional integral condition on microlevel fluctuation field has to be imposed, as expected. The integration has been performed using various numerical integration techniques and the results obtained are compared in a few examples. It is concluded that only trapezoidal rule gives a physically based deformed shape of the RVE. Finally, the efficiency and accuracy of the proposed multiscale homogenization approach are demonstrated by the modeling of a shear layer problem, usually used as a benchmark in multiscale analyses.     

Foliar epidermal anatomy of some selected wild edible fruits of Pakistan using light microscopy and scanning electron microscopy

The present study is focused on the detailed foliar epidermal anatomy of some selected wild edible fruits (WEFs) from Pakistan using light microscopy (LM) and scanning electron microscopy (SEM). The studied species are Ficus racemosa L., Solanum nigrum L., Capparis spinosa L., Physalis divaricata D.Don, Rosa moschata Herrm. and Ribes orientale Desf. collected from various localities of Pakistan. The objective of the present study is to investigate qualitative and quantitative anatomical characters for the identification and differentiation of collected wild edible fruits. The characters studied are shape and size of epidermal cells, anticlinal wall pattern, trichome type and shape, average number of stomata, length and width of stomata and pore. The detailed microscopic investigation and variations in the characters recorded have a key role in the determination and authentication of wild edible fruits. This study possesses great potential for plant taxonomists to further evaluate the species at molecular and genetic levels.