Phenotypic abnormalities observed in aged cloned mice from embryonic stem cells after long-term maintenance

Somatic/embryonic stem cell cloning has made it possible to produce an individual genomically identical to another individual. However, the cloned animals have a variety of abnormalities caused by the aberrant gene modification, with insufficient reprogramming in cloning. We previously reported abnormalities in cloned mice at birth. In this study, we examined what abnormalities could be seen in cloned mice after long-term maintenance. The aged cloned mice showed multiple abnormalities: increase of body weight, some phenotypic abnormalities in the kidneys, testes and thymus, and lower urea nitrogen in their serum biochemical values. The kidneys of all cloned mice were hypertrophied, with a metamorphic or whitish appearance. The multiple lesions, including the enlarged renal pelvis and distension of the renal veins in histology, might be the result of urine accumulation by urinary tract obstruction. The testes of the cloned mice were atrophied, and showed no sperm formation in histology. In contrast, the thymus was rather hypertrophied, and a comparably increased number of lymphocytes were observed in the medulla, consisting mainly of T cells. By conducting a progeny test between the cloned mice, it was confirmed that these abnormalities in the aged cloned mice were not transmitted to their offspring, indicating that the incomplete reprogramming in clones might be in part responsible for the abnormalities detected in aged clones. These results indicate that the postnatal abnormalities observed in aged cloned mice are varied and can be restored through the germ line.     

EVALUATION OF THE CUMULATIVE FORMATION OF HIGH-SPEED LIQUID JETS

1 .　INTRODUCTIONHigh speedliquidjetsareoftenseeninrainerosionsimulationofaircraftandmissiles ,JilbertandField[1] and jetcuttingofmaterials ,Kob ayashi[2 ] .Inthegenerationofjets ,itistechnicallyinterestingtoknowhowtooperatetheexperimen talfacilityattheoptimumconditiontoobtainthejetvelocitymostefficiently .ThisisdescribedbyShiandTakayama[3] ,ShiandItoh[4 ] ,ShiandIt oh[5] .Intheearlieststudyofa pulsedhigh speedliquidjet ,BowdenandBrunton[6 ] puttheliquidinanozzleandthenusedaslugimpact…     

Immunohistochemical study of calpain-mediated alpha-crystallin proteolysis in the UPL rat hereditary cataract

The purpose of this study is to examine if microencapsulated PC12 cells may provide long term effects to the hemiparkinsonian rats. A modified technique was used to encapsulate PC12 cells into gelled microspheres. We found that the PC12 cells can survive in the modified microcapsules in vitro. Most of the PC12 cells formed cluster 3 weeks after incubation. The PC12 cell-loaded microcapsules were also examined in vitro. Adult Sprague-Dawley rats, anesthetized with chloral hydrate, were injected unilaterally with 6-hydroxydopamine into the medial forebrain bundle. The effectiveness of this lesion was tested by measuring apomorphine or methamphetamine-induced rotation one month after lesioning. The unilaterally lesioned rats were transplanted with microencapsulated PC12 cells. Results showed that apomorphine and methamphetamine-induced rotations were greatly suppressed after transplantation. One year after the grafting, the animals were anesthetized with urethane for the voltammetric study. Low dose of KCl was directly injected into the grafted striatum through pressure microejection. We found that KCl-induced DA release, as measured by voltammetric techniques, was regenerated in the striatum. The animals were later sacrificed for histological examination. We found that capsules were present in the lesioned striatum one year after grafting. Most of the capsules contained no PC12 cell. However, some capsules were filled entirely with PC12 cells. Taken together, our data suggested that PC12 cells can survive in the capsule in vitro and may provide long-term dopaminergic effects to the hemiparkinsonian rats.     

Mode analysis of spreading of partially coherent beams propagating through atmospheric turbulence

The spreading of partially coherent beams propagating through atmospheric turbulence is studied by use of the coherent-mode representation of the beams. Specifically, we consider partially coherent Gaussian Schell-model beams entering the atmosphere, and we examine the spreading of each coherent mode, represented by a Hermite-Gaussian function, on propagation. We find that in atmospheric turbulence the relative spreading of higher-order modes is smaller than that of lower-order modes, whereas the relative spreading of all order modes is the same as in free space. This modal behavior successfully explains why under certain circumstances partially coherent beams are less affected by atmospheric turbulence than are fully spatially coherent laser beams.     

Mechanical behavior of a single polymer chain in a non-solvent

Mechanical properties of a single polystyrene chain in mixtures of dioxane and methanol were measured with AFM. The effect of the solubility of the surrounding liquid on mechanical behavior of a polymer chain was examined. In good and Θ solvents, the force-extension curves exhibit a freely jointed chain (FJC)-like trend with good reproducibility. In a non-solvent, the profile of force-extension curve was dependent on the extension speed: an FJC-like nature emerged at the lower speed of 200 nm/s while saw-toothed curves were obtained at the higher speed of 2000 nm/s. The shape of saw-toothed curves varied from measurement to measurement. A force relaxation was also observed in the non-solvent under a fixed extension distance after 2000 nm/s extension. The mechanical behavior in non-solvents suggests that inhomogeneous deformation of a PS chain occurs due to reduction of the chain mobility.     

Motion control of underactuated linkage robot based on gymnastic skill

In this paper, a reproduction of a swing‐up and a giant swing motion of underactuated robots based on technique of the horizontal bar gymnast is discussed with focusing on an equivalent center of mass (ECM) of underactuated robots and the gymnast. At first, the behaviors of the ECM of the gymnast (ECMG) are analyzed by using a motion capturing technique and an efficient motion of the ECMG for the swing‐up and for the giant swing motion are identified from analysis results, respectively. Next, a partial linearization method, which can realize that the ECM of the Acrobot (ECMA) replicates this efficient motion, is designed and reproduces the underactuated robots the swing‐up and giant swing motion like the gymnast. Finally, an effectiveness of the proposed controller is shown by numerical simulations.     

Rule Construction and Execution for Root Cause Analysis

We developed a root cause analysis (RCA) system for an enterprise IT system environment. In this paper, we propose a rule‐construction method that builds analysis rule data objects from general analysis rules and the topology information of the actual target IT environment. Using this method, the IT administrator can use the RCA system without any manual rule modifications. For the execution of the analysis, we introduce the certainty factor to realize robust analysis when the order and reachability of a fault event cannot be guaranteed.     

Restraint Method for Overcoming Heating Irregularity and Improving Heating Equipment Efficiency for Beverage Cans Using High‐Frequency Induction Heating

We were able to reduce heating irregularities in equipment for heating beverage cans by using the high‐frequency induction heating method and determining the resulting improvement in the heating efficiency. The heating irregularity between the top and bottom of the can was reduced to less than 3°C by improving the arrangement of the heating coils for the beverage can by thinning the winding and changing the circuit configuration. The efficiency of power conversion was improved from 93.0% to 97.4%. In this paper, the configuration of the equipment and the experimental results are reported.     

Consideration of multi‐coil type magnetization system for magnetic particle testing of omnidirectional crack in all surfaces of 3D shape test object

Mechanical parts, plants, and cross‐linkages inspected with magnetic‐particle testing (MT) are typically complex 3D shapes. In complex 3D shape portions, because a magnetizer often cannot be configured to inspection portions and the test object cannot be appropriately magnetized, there is a possibility of overlooking a crack in such an instance. Thus, MT system development that was successfully able to detect omnidirectional cracks in 3D shape portions was considered in this study's trials. Two multi‐coil type magnetizers were hence arranged face‐to‐face, and the magnetization of omnidirectional scenarios for all surfaces of 3D shape test object was evaluated.     

Evaluation of standing‐sitting support system with passive rotational seat mechanism in standing motion

Since a decrease in muscle mass of elderly people, the physical burden of them in standing‐sitting motion of a seat are increasing than young people. For this problem, several standing‐sitting support systems have been developed, and evaluations of these systems focusing on a reduction of physical load have been discussed. However, these evaluations are of support systems with an active actuators or of support systems when they use a handrail and a standing aid. Thus, an evaluation of a support system with only passive actuators has not been reported. In this paper, in standing motion with using a standing‐sitting support system with passive rotational seat mechanism which our group proposes, we objectively evaluate an effectiveness of the passive rotational seat mechanism by statistical analysis.