A Single-Phase Active Filter Using an H-Bridge PWM Converter With a Sampling Frequency Quadruple of the Switching Frequency

This paper presents a digital current regulator for H-bridge pulsewidth modulation (PWM) converters, whose sampling frequency equals quadruple of the switching frequency. The current regulator detects the ac current and manipulates the voltage reference not only at the upper and lower peaks of the PWM triangle carrier but also at its zero crossings. This paper theoretically discusses the switching sequence of the H-bridge PWM converter, and reveals the amount of the voltage error and the condition where the voltage error occurs. A modified deadbeat current regulator is proposed to suppress the current oscillation induced by the voltage error, based on the theoretical analysis. Experimental results are shown to verify the control performance of the proposed current regulator. Moreover, a proposed current regulator is applied to a single-phase active power filter to demonstrate the effectiveness in harmonic compensation.     

Colossal Barocaloric Effect by Large Latent Heat Produced by First-Order Intersite-Charge-Transfer Transition

Materials which show novel thermal properties can be used to make highly efficient and environmentally friendly energy systems for thermal energy storage and refrigeration through caloric effects. An A-site-ordered quadruple perovskite-structure oxide, NdCu₃Fe₄O₁₂, is found to release significant latent heat, 25.5 kJ kg⁻¹ (157 J cc⁻¹), at the intersite-charge-transfer transition temperature near room temperature. The transition is first-order and accompanied by an unusual magnetic ordering and a large negative-thermal-expansion-like volume change, and thus, it causes a large entropy change (84.2 J K⁻¹ kg⁻¹). The observed entropy change is comparable to the largest changes reported in inorganic solid materials, and more importantly, it is utilized through a colossal barocaloric effect. The adiabatic temperature change by applying 5.1 kbar pressure is estimated to reach 13.7 K, which means efficient refrigeration can be realized through this effect.     

A GaAs FET-IC mixer achieving high receiver sensitivity for coherent optical heterodyne detection at 2.5 Gb/s

A FET-IC mixer that uses a Gilbert-cell multiplier with a single-to-balance conversion input buffer is proposed. The key point in the FET-IC mixer design is that a single-to-balance conversion input buffer is used to improve the amplitude and phase balance of signals output from the input buffer stage. Excellent squaring characteristics were achieved in the range from 0 to -25 dBm. The FET-IC mixer was successfully tested in a 2.5 Gb/s CPFSK demodulator for optical heterodyne reception. Compared to the best diode passive double-balanced diode mixers, receiver sensitivity was improved by 1 dB at +10 dBm electrical input power. Very small degradation in receiver sensitivity, less than 3 dB, was achieved at electrical input power levels ranging from +10 to -10 dBm.<>     

A 63-mW H.264/MPEG-4 audio/visual codec LSI with module-wise dynamic Voltage/frequency scaling

A single-chip H.264 and MPEG-4 audio-visual LSI for mobile applications including terrestrial digital broadcasting system (ISDB-T / DVB-H) with a module-wise, dynamic voltage/frequency scaling architecture is presented for the first time. This LSI can keep operating even during the voltage/frequency transition, so there is no performance overhead. It is realized through a dynamic deskewing system and an on-chip voltage regulator with slew rate control. By the combination with traditional low power techniques such as embedded DRAM and clock gating, it consumes only 63 mW in decoding QVGA H.264 video at 15 frames/sec and MPEG-4 AAC LC audio simultaneously.     

Improved efficiency of polymer light-emitting diodes by inserting a hole transport layer formed without thermal treatment above glass transition temperature

We have demonstrated a significant improvement in the performance of polymer light-emitting diodes (PLEDs) by inserting the fluorene-triatylamine copolymer as hole transport layer (HTL) without a thermal treatment above the glass transition temperature (T_g). A thin HTL insolubilized by a thermal treatment above T_g is often inserted as an interlayer between an anode buffer layer and a light-emitting polymer (LEP) in PLEDs fabricated by using a conventional solution process. The evaporative spray deposition using ultradiluted solution (ESDUS) method has enabled fabricating polymer bilayer structure without an insolublizing procedure. The bilayer PLEDs fabricated by ESDUS without the thermal treatment showed significantly higher and more stable external quantum efficiency than PLEDs having the conventional interlayer. Thermal treatment above T_g of the copolymer would induce degradation of its hole injection property. Furthermore, ESDUS bilayer devices showed much higher power efficiency than interlayer devices when calcium was used for cathode. The improvements would be caused by the enhancement of hole injection and the effective electron blocking at the copolymer/LEP interface in the ESDUS bilayer devices.     

Cross-layer selective routing for cost and delay minimization in IEEE 802.11ac wireless mesh network

Wireless Networks - A Wireless Internet-access Mesh NETwork (WIMNET) provides scalable and reliable internet access through the deployment of multiple access points (APs) and gateways (GWs). In...     

Topic allocation method on edge servers for latency-sensitive notification service

The importance of real-time notification has been growing for social services and Intelligent Transporting System (ITS). As an advanced version of Pub/Sub systems, publish-process-subscribe systems, where published messages are spooled and processed on edge servers, have been proposed to achieve data-driven intelligent notifications. In this paper, we present a system that allows a topic to be managed on multiple edge servers so that messages are processed near the publishers, even when publishers spread over a wide area. Duplicating messages on geographically distributed servers could enable immediate notification to neighboring subscribers. However, the duplicated message spool may cause exhaustion of resources. We prepare a formal model of our publish-process-subscribe system and formulate the topic allocation as an optimization problem under the resource constraints of edge servers. As the optimization problem is NP-hard, we propose heuristics leveraging the locality and the pub/sub relationships observed between clients to use the edge server resources efficiently. Our performance evaluation shows that our method reduces the delay to deliver notifications and the effectiveness of the strategy exploiting the relationships between clients.     

A Retargetable Compilation Methodology for Embedded Digital Signal Processors Using a Machine-Dependent Code Optimization Library

We address the problem of code generation for embedded DSP systems. Such systems devote a limited quantity of silicon to program memory, so the embedded software must be sufficiently dense. Additionally, this software must be written so as to meet various high-performance constraints. Unfortunately, current compiler technology is unable to generate dense, high-performance code for DSPs, due to the fact that it does not provide adequate support for the specialized architectural features of DSPs via machine-dependent code optimizations. Thus, designers often program the embedded software in assembly, a very time-consuming task. In order to increase productivity, compilers must be developed that are capable of generating high-quality code for DSPs. The compilation process must also be made retargetable, so that a variety of DSPs may be efficiently evaluated for potential use in an embedded system. We present a retargetable compilation methodology that enables high-quality code to be generated for a wide range of DSPs. Previous work in retargetable DSP compilation has focused on complete automation, and this desire for automation has limited the number of machine-dependent optimizations that can be supported. In our efforts, we have given code quality higher priority over complete automation. We demonstrate how by using a library of machine-dependent optimization routines accessible via a programming interface, it is possible to support a wide range of machine-dependent optimizations, albeit at some cost to automation. Experimental results demonstrate the effectiveness of our methodology, which has been used to build good-quality compilers for three fixed-point DSPs. This revised version was published online in July 2006 with corrections to the Cover Date.     

Earth‐Abundant and Durable Nanoporous Catalyst for Exhaust‐Gas Conversion

Precious metals (Pt and Pd) and rare earth elements (Ce in the form of CeO₂) are typical materials for heterogeneous exhaust‐gas catalysts in automotive systems. However, their limited resources and high market‐driven prices are principal issues in realizing the path toward a more sustainable society. In this regard, herein, a nanoporous NiCuMnO catalyst, which is both abundant and durable, is synthesized by one‐step free dealloying. The catalyst thus developed exhibits catalytic activity and durability for NO reduction and CO oxidation. Microstructure characterization indicates a distinct structural feature: catalytically active Cu/CuO regions are tangled with a stable nanoporous NiMnO network after activation. The results obtained by in situ transmission electron microscopy during NO reduction clearly capture the unique reaction‐induced self‐transformation of the nanostructure. This finding can possibly pave the way for the design of new catalysts for the conversion of exhaust gas based on the element strategy.