Establishment of a modified rankine method for the separate determination of free and combined sulphites in foods. III

Summary Considerable improvements were made to the original Rankine method. Replacement of aspiration with an injection system contributed a great deal to the simplification of procedure, being accompanied with an increase in reproducibility. Air (flow rate 1.01/min) was used for injection because the use of inert gas gave little increase in recovery rate.Sodium bisulphite (free sulphite) and three kinds of combined sulphite compound (bisulphite adducts of acetaldehyde, pyruvic acid and D-mannose) were used to find the most suitable conditions for the separate determination of free and combine sulphites.Free sulphite was expelled from the sample by bubbling at 0 °C for 30 min. It was confirmed that no combined sulphite was dissociated under these conditions. The phosphoric acid concentration had an important role in the liberation of sulphite. When 25% phosphoric acid was used, more than 99% of free sulphite was expelled by cold bubbling and more than 99% of combined sulphite was recovered by heating afterwards for 10 min.The scope of the modified Rankine method was also extended to the determination of sulphite in concentrated orange juice.

---

Verwendung der modifizierten Rankine-Methode zur getrennten Bestimmung von Sulfiten in Lebensmitteln. III

Zusammenfassung Die Rankine-Methode wurde bedeutend verbessert. Ein Umtausch der Aspiration mit Blasensystem trug beträchtlich zur Vereinfachung des Bestimmungsverfahrens bei, und die Reproduzierbarkeit wurde verbessert. Luft (Fließrate 1,01/min) wurde als Blasengas benutzt, da der Gebrauch von Inertgas für die Wiederfindungsrate unbedeutend ist.Natriumhydrogensulfit (freies Sulfit) und drei Arten gebundener Sulfite (Acetaldehydhydrogensulfit, Pyruvathydrogensulfit undd-Mannosehydrogensulfit) dienten dazu, die geeignetsten Bedingungen für die getrennte Bestimmung der freien und gebundenen Sulfite zu ermitteln.Freies Sulfit wurde bei 0 °C durch 30 min Durchblasen vertrieben. Hierbei ging kein gebundenes Sulîit verloren. Die Phosphorsäurekonzentration war wichtig für die Freisetzung des Sulfites. Wenn man 25%ige Phosphorsäure verwendet, werden > 99% freien Sulfites beim Durchblasen in der Kälte vertrieben, während > 99% gebundenen Sulfites durch nachheriges 10 min langes Erhitzen wiedergewonnen werden.Die modifizierte Rankine-Methode wurde weiterhin für konzentrierte Säfte verwendet.

---

---

Studies on the Analyses of Sulphites in Foods (III)     

Enhancement of C2C12 differentiation by perfluorocarbon-mediated oxygen delivery

We have studied the effect of enhanced oxygen delivery by perfluorocarbons on the differentiation of C2C12 cells. The extent of differentiation was assessed by means of phase contrast/fluorescence microscopy, active tension measurement and the glucose consumption/lactate production rates. We found that enhanced oxygen delivery is suitable for full differentiation of C2C12 cells.     

Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Formation of stable foam by the cells and culture supernatant of Gordonia (Nocardia) amarae

Gordonia amarae is the cause of foaming activated sludge. In this study, the mechanism of foam formation by G. amarae SC1 was investigated. A liquid culture of SC1 cells generated a stable foam when shaken reciprocally. This foam formation was dependent on the presence of both bacterial cells and culture supernatant. A high-molecular-weight fraction (Mw>10000) of the supernatant was capable of emulsifying n-hexadecane in addition to exhibiting foaming activity, indicating that it contains a surface-active substance(s). The bacterial cells showed a high affinity to hexadecane. This hydrophobic cell surface property might be involved in the attachment of cells to air bubbles to generate a stable foam. The results demonstrated the participation of cells and the extracellular biosurfactant in the formation and stabilization of foam in G. amarae SC1 culture.     

A Study of Mutual Coupling between Vertical Grounding Electrodes

This paper investigates the mutual grounding impedance between vertical grounding electrodes based on field measurements and FDTD simulations. In the case of vertical electrodes, the mutual impedance between the electrodes is almost completely independent of the electrode length, and thus the induced voltage is nearly constant as the electrode length becomes longer. This characteristic is different from that of an overhead conductor, where the electromagnetic‐induced voltage is proportional to the conductor length. The greater the separation distance between the electrodes, the smaller the induced voltage, as in the case of an overhead conductor. The propagation speed increases as the separation increases. It is found that the speed is not necessarily proportional to the inverse of the relative permittivity of the earth.     

Glass-Ceramics and Solid-State Lighting

Yttrium aluminum garnet (YAG) doped with Ce³⁺ ion is known as an excellent phosphor for light-emitting diode (LED), usually used as a powder form dispersed in organic resins. We have developed translucent glass-ceramics (GC) of YAG: Ce³⁺ microcrystals in 2004. The GC sheet with half millimeter thick can work efficiently to make identical emission spectra with conventional white LED when combined with a blue LED. This report reviews the development history of the GC materials and impact for all inorganic solution for solid-state lighting.     

Effects of energetic heavy ion irradiation on the structure and magnetic properties of FeRh thin films

Fe-54at.%Rh thin films were irradiated with 10 MeV iodine ions at room temperature. Before and after the irradiations, the changes in magnetic properties and the lattice structure of the samples were studied by means of a SQUID magnetometer and X-ray diffraction. For the low fluence irradiation, the SQUID measurement at 20 K shows that the anti-ferromagnetic region of the thin film is changed into ferromagnetic region by the irradiation. As the film thickness is much smaller than the ion range, we can discuss the relationship between the density of energy deposited by ions and the change in magnetization quantitatively. For the high fluence irradiation, the magnetization of the film is strongly decreased by the irradiation, which can be explained as due to the change in lattice structure from B2 into A1 structure by the irradiation.     

Activation of Mast-Cell-Derived Chymase in the Lacrimal Glands of Patients with IgG4-Related Ophthalmic Disease

The purpose of this present study was to investigate the distribution and expression of chymase in the lacrimal glands (LGs) of patients afflicted with IgG4-related ophthalmic disease (IgG4-ROD). LGs from patients with severe canalicular obstruction were considered the control group. Toluidine blue staining confirmed a significant increase in the number of mast cells in the LGs obtained from the IgG4-ROD patients. In addition, immunostaining of serial sections from the LGs showed a significant increase in the number of chymase-positive cells and tryptase-positive cells in the IgG4-ROD LGs compared to the normal control LGs. The mRNA expression of chymase, tryptase, TGF-β1, and collagen-I tended to increase in the IgG4-ROD LGs. Immunostaining of vimentin and α-smooth muscle actin (α-SMA) showed that myofibroblasts were the main cellular components in severely fibrotic regions of LGs in patients with IgG4-ROD. Linear regression analyses on the number of mast cells, chymase-positive cells, and tryptase-positive cells revealed significant positive correlations between those respective cells. Our findings suggest that chymase may play a role in the fibrotic disorder of IgG4-ROD LGs through the regulation of TGF-β1 activation and collagen-I deposition, and that it may be a therapeutic target for patients afflicted with IgG4-ROD.     

Molecular Hydrogen Enhances Proliferation of Cancer Cells That Exhibit Potent Mitochondrial Unfolded Protein Response

Molecular hydrogen ameliorates pathological states in a variety of human diseases, animal models, and cell models, but the effects of hydrogen on cancer have been rarely reported. In addition, the molecular mechanisms underlying the effects of hydrogen remain mostly unelucidated. We found that hydrogen enhances proliferation of four out of seven human cancer cell lines (the responders). The proliferation-promoting effects were not correlated with basal levels of cellular reactive oxygen species. Expression profiling of the seven cells showed that the responders have higher gene expression of mitochondrial electron transport chain (ETC) molecules than the non-responders. In addition, the responders have higher mitochondrial mass, higher mitochondrial superoxide, higher mitochondrial membrane potential, and higher mitochondrial spare respiratory capacity than the non-responders. In the responders, hydrogen provoked mitochondrial unfolded protein response (mtUPR). Suppression of cell proliferation by rotenone, an inhibitor of mitochondrial ETC complex I, was rescued by hydrogen in the responders. Hydrogen triggers mtUPR and induces cell proliferation in cancer cells that have high basal and spare mitochondrial ETC activities.