中国有色金属再生资源回收利用及展望

一、有色金属再生资源利用现状我国是有色金属资源短缺的国家，节约和合理使用资源显得特别重要。世界上工业发达国家对再生资源利用相当重视。近10年来世界再生铜产量已占原生铜产量的40％～55％，美国约占本国原生铜产量的60％，日本约占45％，德国约占80％。世界再生铝产量也占原生铝产量的30％～50％，美国约占本国原生铝的50％，日本约占90％，德国约占45％。世界再生铅产量也占原生铅产量的40％～60％，美国约占本国原生铅的75％，日本约占60％，德国约占55％。锌、镍、镁、锡、锑等再生资源也得到不同程度的利用。     

纳米TiO2复合铁钛防锈颜料的研制及产业化进展

介绍了纳米TiO2复合铁钛防锈颜料的制备原理、工艺、技术指标;描述了铁钛防锈涂料的配方、性能检验和产业化进展情况.     

Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

锌基重防腐双涂层防护技术在高速公路护栏上的应用

介绍了双涂层防护技术的进展以及锌基重防腐双涂层防护技术在高速公路护栏上的应用。     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

The influence of F doping on the activity of PbO2 film electrodes in oxygen evolution reaction

The PbO₂ and F⁻-doped PbO₂ (F-PbO₂) film electrodes have been prepared by an electrodeposition process onto platinum substrate. The changes of their electrochemical activity for oxygen evolution (OE) reaction with accelerated electrolysis time have been studied. The results show that the activity of the electrodes decreases with increasing electrolysis time. This can be attributed to the conductivity variations, which are caused by the decrease of the oxygen vacancy concentration in PbO₂ films during OE. The mechanism of the decrease of the oxygen vacancies has been investigated. For F-PbO₂ film electrodes, though its electrochemical activity is somewhat lower than that of undoped one, its activity stability is much higher in comparison with that of PbO₂. The influence of F⁻ doping on the activity of PbO₂ film electrodes has been also discussed.     

Determination and correlation solubility of 4-nitroimidazole in twelve pure solvents from 278.15 K to 323.15 K

In this paper, the solubility of 4-nitroimidazole in twelve pure solvents (toluene, benzene, 1,4-dioxane, acetonitrile, ethyl acetate, acetone, GBL, ethanol, methanol, n-butanol, DMF and NMP) were determined by using the laser monitoring system from 278.15 K to 323.15 K under 101.1 kPa, which are 0.00018-0.00070, 0.00021-0.00073, 0.00034-0.00092, 0.00038-0.00142, 0.00047-0.00120, 0.00126-0.00303, 0.00225-0.00517, 0.00310-0.00724, 0.00467-0.00982, 0.00453-0.01940, 0.01947-0.04652, and 0.04670-0.07452, respectively. At constant temperature, the mole fraction solubility of 4-nitroimidazole were increased as the following order: toluene < benzene < 1,4-dioxane < (ethyl acetate or acetonitrile) < acetone < GBL < ethanol < (methanol or nbutanol) < DMF < NMP, and the solubility of 4-nitroimidazole in (ethyl acetate, acetonitrile) and (methanol, n-butanol) had an intersection point at 297.55 K and 281.85 K, respectively. The solubility of 4-nitroimidazole could be increased with increasing temperature in twelve pure solvents. The ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation were used to correlate the experimental values. The experimental solubility values were employed to calculate the standard dissolution enthalpy, standard dissolution entropy and Gibbs energy. The dissolution of 4-nitroimidazole could be an endothermic process in twelve pure solvents. The determination and fitting solubility of 4-nitroimidazole have important guiding significance for the purification and crystallization of its preparation process.     

农作物秸秆增强氟石膏复合材料的微观结构研究

将玉米秸秆加入改性后的氟石膏中，研究改性剂、玉米秸秆对氟石膏复合材料结构性能的影响；并用苯丙乳液对玉米秸秆纤维进行表面处理，用以改善基体材料和增强材料的界面结合状况，由此显著提高制品性能。     

Influences of zinc oxide and an organic additive on the electrochemical behavior of pure aluminum in an alkaline solution

The corrosion behavior of pure aluminum in inhibited and uninhibited 4 MKOH was investigated by means of hydrogen collection, polarization curve measurement and electrochemical impedance spectroscopy (EIS). The results showed that the corrosion of pure aluminum was greatly inhibited by the addition of ZnO and dimethyl amine epoxy propane (designated as DE). EIS and EDAX analyses revealed that ZnO produces its effect by depositing on the aluminum surface, which increases the overpotential of hydrogen evolution. It was also found that the addition of DE could greatly improve the deposition of zinc layers.     

以废弃的耐火材料、高铝瓷、催化剂等生产耐磨陶瓷

从技术、经济、生态、政策等角度，对采用氧化铝和硅酸铝质工业废料制取耐磨陶瓷作了全面、系统的分析研究，论证了废渣制瓷技术上的可行性，阐明了经济上和生态上的优越性，提出了解决具体问题的办法。