Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Non‐destructive evaluation of fatigue damage and fatigue crack initiation in type 316 stainless steel by positron annihilation line‐shape and lifetime analyses

Rotating bending fatigue tests were conducted using type 316 stainless steel. The fatigue tests were periodically terminated, and fatigue damage and fatigue crack initiation were non‐destructively and sequentially evaluated by positron annihilation line‐shape and lifetime analyses. The counter‐jig and anticoincidence methods were used for positron annihilation line‐shape and lifetime analyses, respectively, to enhance the analytical precision. The fatigue crack lengths were monitored by a plastic replication technique, and related to the parameters in both analyses. S‐parameter obtained in the line‐shape analysis increased with increasing fatigue damage, while it was difficult to detect fatigue crack initiation and subsequent small fatigue crack growth. That was because the precision of line‐shape analysis was limited. On the other hand, both fatigue damage and fatigue crack initiation were successfully detected by lifetime analysis. Positron annihilation lifetime also increased with increasing fatigue damage, and lifetime was longer at the notch root with fatigue crack than at the smooth section without crack. It was considered that the precision of lifetime analysis was high enough to detect high dislocation density areas at the fatigue crack tips.     

High-temperature oxidation of Al-deposited stainless-steel foils

The oxidation resistance of Al-deposited Fe–Cr–Al foils containing small amounts of La and Ce was assessed by a cyclic oxidation test with temperature varying between room temperature and 1323 K to 1423 K in static air. (1) The Al content of Fe–Cr–Al–La, Ce foils can be increased by depositing an Al layer from the vapor phase. The deposition of a 1-m-thick Al layer on both sides of the 50-m-thick foil is equivalent to a 1.5 mass% increase in the Al content. The deposited Al diffuses into the foil during heat treatment. The uniform distribution of Al is obtained by heating at 1273 K for 18 ks. (2) After the initial transition stage the oxidation follows the parabolic law until breakaway sets in. The scale consists mainly of -Al₂O₃ during the parabolic period. (3) The increase in the Al content by more than 5 mass% by the Al-deposition remarkably improves high-temperature oxidation resistance (smaller parabolic rate constant and longer protection time). (4) The Al-deposited foils have better oxidation resistance than the conventional foils with the same contents of Al and rare-earth elements. This is attributable to the different nature of the initially formed oxide on the Al-deposited foil. (5) The so-called rare-earth element effect was also observed for the Al-deposited foils. Predominant diffusion of oxygen through the Al₂O₃ scale and vacancy-sink mechanism are applicable to the present results.     

Intercalation of n-alkylamines into α-tin(IV) bis(hydrogenphosphate)

The intercalation reaction of n-alkylamines from methyl- to hexadecylamine into -tin(IV) bis(hydrogenphosphate) has been investigated. The reaction was conducted by mixing the phosphate and solutions of the amines dissolved in water or benzene. The amine/ phosphate molar ratios in the reaction mixtures were 0.43, 0.85, 1.71 and 3.41. The nitrogen/phosphorus atomic ratio in the intercalation compound was not changed by the amine/phosphate molar ratio. The interlayer distances of the intercalates obtained in the reaction mixtures with molar ratios of 3.41 and 1.71 increased with an increase in the number of carbon atoms in the alkyl chain of the amine. The slope of the straight line obtained in plot of interlayer distance versus number of carbon atoms in the alkyl chain of the amine indicates that the amine molecules form a double layer in the interlayer space of the phosphate and are inclined at an approximate angle of 67.7° to the phosphate layer. The interlayer distances of the intercalates of butyl- to nonylamines obtained at the molar ratio of 0.85 are smaller than those of the corresponding compounds from the molar ratios of 3.41 and 1.71, while those of decyl- to hexadecylamine intercalates lie on the previously discussed line. This behaviour is interpreted by assuming kink formation in the short alkyl chains between the phosphate layers.     

Fabrication of X-rays mask with carbon membrane for diffraction gratings

We have produced diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. These diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Therefore, we decided to use the X-rays lithography technique that used synchrotron radiation of the directivity for a manufacture process. The accuracy of the completed structure depends largely on the accuracy of the X-ray mask. In our group, a resin material is conventionally used for the membrane of large X-ray masks. However, X-ray masks comprising a resin membrane have the disadvantage that, after several cycles of X-ray exposure, they crease and sag due to X-ray-derived heat. As a substitute for the conventional resin membrane, we experimentally fabricated a new X-ray mask using a carbon wafer membrane. The newly fabricated X-ray mask was subjected to X-ray exposure experiment. We succeeded in making the structure body which was almost shape. And the experimental results verified that the new mask did not deteriorate even when used repeatedly, demonstrating that it was highly durable.     

Fabrication of high hardness Ni mold with electroless nickel–boron thin layer

The nickel electroforming method using a high-concentration nickel sulfamate bath is commonly used to fabricate micro metal molds in the LIGA process; however, this method does not produce micro metal molds of sufficient hardness. One means of improving the hardness of micro metal molds made using the nickel electroforming method is to include additives in the nickel plating solution. Another method is nickel alloy plating or a similar technique. In this research, we used a nickel–boron (Ni–B) electroless alloy plating method to obtain a hard nickel plated film having hardness of 832 Hv. It was also ascertained that Ni–B electroless alloy plated film retains its high hardness even during heat treatment in conditions of 250°C for 1 h. To deal with the high stresses developed in high-hardness plated films, we proposed double-layer nickel electroforming. This method is covered and used on conventional nickel electroforming layer by high hardness micro mold. High hardness micro metal mold using double-layer was fabricated by nickel electroforming and Ni–B electroless alloy plating method.     

Recurrent infomax generates cell assemblies, neuronal avalanches, and simple cell-like selectivity

Recently multineuronal recording has allowed us to observe patterned firings, synchronization, oscillation, and global state transitions in the recurrent networks of central nervous systems. We propose a learning algorithm based on the process of information maximization in a recurrent network, which we call recurrent infomax (RI). RI maximizes information retention and thereby minimizes information loss through time in a network. We find that feeding in external inputs consisting of information obtained from photographs of natural scenes into an RI-based model of a recurrent network results in the appearance of Gabor-like selectivity quite similar to that existing in simple cells of the primary visual cortex. We find that without external input, this network exhibits cell assembly-like and synfire chain-like spontaneous activity as well as a critical neuronal avalanche. In addition, we find that RI embeds externally input temporal firing patterns to the network so that it spontaneously reproduces these patterns after learning. RI provides a simple framework to explain a wide range of phenomena observed in in vivo and in vitro neuronal networks, and it will provide a novel understanding of experimental results for multineuronal activity and plasticity from an information-theoretic point of view.     

Design of an adaptive fuzzy sliding mode control for uncertain discrete-time nonlinear systems based on noisy measurements

This paper presents the design of an adaptive fuzzy sliding mode control (AFSMC) for uncertain discrete-time nonlinear dynamic systems. The dynamic systems are described by a discrete-time state equation with nonlinear uncertainties, and the uncertainties include the modelling errors and the external disturbances to be unknown but nonlinear with the bounded properties. The states are measured by the restriction of measurement sensors and the contamination with independent measurement noises. The nonlinear uncertainties are approximated by using the fuzzy IF-THEN rules based on the universal approximation theorem, and the approximation error is compensated by adding an adaptive complementary term to the proposed AFSMC. The fuzzy inference approach based on the extended single input rule modules is proposed to reduce the number of the fuzzy IF-THEN rules. The estimates for the un-measurable states and the adjustable parameters are obtained by using the weighted least squares estimator and its simplified one. It is proved that under some conditions the estimation errors will remain in the vicinity of zero as time increases, and the states are ultimately bounded subject to the proposed AFSMC. The effectiveness of the proposed method is indicated through the simulation experiment of a simple numerical system.     

Development of ‘UR-System 2’: a training system for recovery of motor function of plegic upper limb after stroke

We developed a new training system, called ‘UR-System 2’, for the recovery of motor function of a plegic upper limb after stroke. UR-System 2, which was redesigned based on knowledge gained from clinical tests using UR-System 1, was newly equipped with a function for testing the motor function of patients, such as isolated movement. In order to verify the effectiveness of UR-System 2, we conducted the following procedures: we verified the safety of training in healthy persons; we gathered standard data on pronation and supination of healthy forearms during tests; and, we verified that the test function was effective in evaluating the recovery effect of isolated movement in two hemiplegic patients.