Performance Analysis of Full-Duplex Vehicle-to-Vehicle Relay System over Double-Rayleigh Fading Channels

Mobile Networks and Applications - In this paper, we study the performance of a full-duplex (FD) relay system in vehicle-to-vehicle (V2V) communication. In this relay communication system, the...     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.     

固态继电器为电动汽车电池监测提供便利

电动汽车常被喻作“归来的孩子”，因为这项技术在多年前进入市场后便一直沉寂，直至最近才再次活跃起来。其实，电动汽车早于1835年首次于美国出现，到1899年，纽约市接近90％的出租车都是由电力驱动。然而，当电力启动器和内燃机变得完善时，电动汽车的使用就迅速衰退。随着如今对环境保护的关注，由燃烧碳氢化合物造成的污染，加之汽油成本高升的影响，再次     

Measurement of the electric field pattern of a Fabry-Perot resonator used in quasi-optical gyrotrons

The field pattern of the resonator used in a quasi-optical gyrotron operating in the millimetre wave range is measured. Two resonators are studied: one composed of a spherical mirror and an ellipsoidal grating and the other symmetric using two mirrors with annular slots. The measurements indicate that the electric field distribution is gaussian, in spite of the complex geometry of the resonator, and thus provide an experimental basis for the assumption often used to compute the efficiency of quasi-optical gyrotrons.     

All-active monolithic InP-based HBT VCO with tunable HEMT inductor

A novel HEMT-HBT VCO is presented; it is the first all-active analogue VCO demonstrated using InP HEMT-HBT integrated MMIC technology. The MMIC monolithically integrates an InP common-collector HBT oscillator with a tunable InP HEMT active inductor using selective MBE. The novel HEMT-HBT VCO can provide performance advantages over analogue VCOs such as the multi-vibrator, and has direct implications for high speed clock recovery circuits needed in InP based optoelectronic IC applications     

Influence of Bulky Organo‐Ammonium Halide Additive Choice on the Flexibility and Efficiency of Perovskite Light‐Emitting Devices

Perovskite light‐emitting diodes (LEDs) require small grain sizes to spatially confine charge carriers for efficient radiative recombination. As grain size decreases, passivation of surface defects becomes increasingly important. Additionally, polycrystalline perovskite films are highly brittle and mechanically fragile, limiting their practical applications in flexible electronics. In this work, the introduction of properly chosen bulky organo‐ammonium halide additives is shown to be able to improve both optoelectronic and mechanical properties of perovskites, yielding highly efficient, robust, and flexible perovskite LEDs with external quantum efficiency of up to 13% and no degradation after bending for 10 000 cycles at a radius of 2 mm. Furthermore, insight of the improvements regarding molecular structure, size, and polarity at the atomic level is obtained with first‐principles calculations, and design principles are provided to overcome trade‐offs between optoelectronic and mechanical properties, thus increasing the scope for future highly efficient, robust, and flexible perovskite electronic device development.     

Power splitting–based energy‐harvesting protocol for wireless‐powered communication networks with a bidirectional relay

In this paper, we apply the power splitting–based energy‐harvesting protocol to enhance the transmission between a wireless access point and a mobile user via a helping relay. The mobile user exploits the energy supplied by the access point and forwarded by the relay to transmit its own data back to the access point, again with the helping of the relay. Here, the effect of various system parameters, including power‐splitting factor and the power‐to‐noise ratio on the system performance, is rigorously studied, with closed‐form expressions for the outage probability and system throughput as the results. Furthermore, we figure out the optimal power‐splitting ratio at which the information throughput from the user to the AP is maximized, subject to the constraint on the transmitting power at the access point. All above analytical results are also supported by Monte Carlo simulation.     

End‐to‐end security‐reliability analysis of multi‐hop cognitive relaying protocol with TAS/SC‐based primary communication,total interference constraint and asymmetric fading channels

In this paper, we analyze the tradeoff between outage probability (OP) and intercept probability (IP) for a multi‐hop relaying scheme in cognitive radio (CR) networks. In the proposed protocol, a multi‐antenna primary transmitter (PT) communicates with a multi‐antenna primary receiver (PR), using transmit antenna selection (TAS) / selection combining (SC) technique, while a secondary source attempts to transmit its data to a secondary destination via a multi‐hop approach in presence of a secondary eavesdropper. The secondary transmitters such as source and relays have to adjust their transmit power to satisfy total interference constraint given by PR. We consider an asymmetric fading channel model, where the secondary channels are Rician fading, while the remaining ones experience the Rayleigh fading. Moreover, an optimal interference allocation method is proposed to minimize OP of the primary network. For the secondary network, we derive exact expressions of end‐to‐end OP and IP which are verified by Monte Carlo simulations.     

Magnetoluminescence properties of Hg1−xCdxTe epitaxial layers and superlattice structures grown by metalorganic molecular beam epitaxy

We present a study of the electro-optical properties ofHg _1- xCd_xTe epitaxial layers and Hg_1-x Cd_xTe/CdTe (0.28 < x < 0.30) superlattice structures by x-ray diffraction, lateral transport and photo- and magneto-luminescence measurements. Systematic studies of the excitation intensity and magnetic field dependence of the photoluminescence revealed direct evidence of an excitonic contribution to the observed luminescence in Hg_{1- x}Cd_xTe epitaxial layers. Similar investigations of the superlattice structures indicated that excitonic corrections were required to adequately fit the luminescence data. Optical gains of 80 cm⁻¹ were obtained for an excitation intensity of 100 kW/cm² indicating suitable electro-optical properties for making efficient mid-infrared laser diodes.