Forensic surface metrology: tool mark evidence

Over the last several decades, forensic examiners of impression evidence have come under scrutiny in the courtroom due to analysis methods that rely heavily on subjective morphological comparisons. Currently, there is no universally accepted system that generates numerical data to independently corroborate visual comparisons. Our research attempts to develop such a system for tool mark evidence, proposing a methodology that objectively evaluates the association of striated tool marks with the tools that generated them. In our study, 58 primer shear marks on 9?mm cartridge cases, fired from four Glock model 19 pistols, were collected using high-resolution white light confocal microscopy. The resulting three-dimensional surface topographies were filtered to extract all "waviness surfaces"-the essential "line" information that firearm and tool mark examiners view under a microscope. Extracted waviness profiles were processed with principal component analysis (PCA) for dimension reduction. Support vector machines (SVM) were used to make the profile-gun associations, and conformal prediction theory (CPT) for establishing confidence levels. At the 95% confidence level, CPT coupled with PCA-SVM yielded an empirical error rate of 3.5%. Complementary, bootstrap-based computations for estimated error rates were 0%, indicating that the error rate for the algorithmic procedure is likely to remain low on larger data sets. Finally, suggestions are made for practical courtroom application of CPT for assigning levels of confidence to SVM identifications of tool marks recorded with confocal microscopy.     

Investigation of the copper concentration on photocurrent collection of CuInSe2 solar cells

In this study, CuInSe₂ (CISe) thin films were prepared from thermally evaporated Cu/In precursors, having various Cu/In atomic ratio, under the same selenization conditions. The precursors were converted into CISe absorber by annealing in a quartz tube furnace in the selenium vapours at substrate temperature of 500 °C. We developed four CISe films with Cu/In atomic ratio of 0.81–1.19, denoted as Cu‐very rich, Cu‐rich, Cu‐poor, and Cu‐very poor CISe thin films respectively. The effects of Cu/In atomic ratio on grain size, surface morphology, micro‐structure and defect formation of the resulting CISe films were examined. It has been found that the photovoltaic properties were strongly related to Cu concentration, as well as carrier transport mechanism. Defects at the surface and in the bulk of CISe thin films were observed using X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy, Raman spectroscopy, energy dispersive X‐ray spectroscopy and scanning electron microscopy. Moreover, XRD revealed that the CISe film surface had a preferred orientation along the (112) plane. The XRD intensity and full width at half maximum of the (112) plane of CISe varied according to the Cu/In atomic ratio. Our experimental results show that the Cu‐rich solar cell achieves conversion efficiency of 4.55% and exhibits an exceptional high short‐circuit current density. Copyright © 2016 John Wiley & Sons, Ltd.     

The spectrum study of blood pressure during the disturbance of organic vascular beds

Abstract

Like electrical circuit components, the vascular beds in organs present impedance to waves in systemic circulation. In this study, the authors design an animal experiment to study the effect of the impedance to the pressure waves. We view the systemic circulation as an electrical circuit network, and interpret the vascular beds in organs as lumped components in the electrical circuit. Nature's designing of the systemic circulation minimizes the pressure wave reflection, and maximizes blood distribution. This is very similar to the concept adopted by electrical engineers in designing electrical circuits.     

Temperature dependent coercivity of randomly assembled acicular Fe3O4 particles

Abstract

The Stoner‐Wohlfarth model and the chain‐of‐spheres fanning model are used to calculate temperature dependence of the coercivity of acicular single‐domain particles by taking thermal effect into consideration. Coercivity of the particles is evaluated by summing up the contributions of shape anisotropy, magnetocrystalline anisotropy and magnetostrictive anisotropy. The coercivities of randomly assembled Fe₃O₄ particles above the transition point (119°K) and below room temperature are calculated and compared with the published experimental data.     

A two-phase model for dry density-varying granular flows

A granular flow is normally comprised of a mixture of grain-particles (such as sand, gravel or rocks) of different sizes. In this study, dry granular flows are modeled utilizing a set of equations akin to a two-phase mixture system, in which the interstitial fluid is air. The resultant system of equations for a two-dimensional configuration includes two continuity and two momentum balance equations for the two respective constituents. The density variation is described considering the phenomenon of air entrainment/extrusion at the flow surface, where the entrainment rate is assumed to be dependent on the divergent or convergent behavior of the solid constituent. The density difference between the two constituents is extremely large, so, as a consequence scaling analysis reveals that the flow behavior is dominated by the solid species, yielding small relative velocities between the two constituents. A non-oscillatory central (NOC) scheme with total variation diminishing (TVD) limiters is implemented. Three numerical examples are investigated: the first being related to the flow behaviors on a horizontal plane with an unstable initial condition; the second example is devoted to simulating a dam-break problem with respect to different initial conditions; and in the third one investigates the behavior of a finite mass of granular material flowing down an inclined plane. The key features and the capability of the equations to model the behavior are illustrated in these numerical examples.     

Body weight management effect of burdock (Arctium lappa L.) root is associated with the activation of AMP-activated protein kinase in human HepG2 cells

Burdock (Arcticum lappa L.) root is used in folk medicine and also as a vegetable in Asian countries. In the present study, burdock root treatment significantly reduced body weight in rats. To evaluate the bioactive compounds, we successively extracted the burdock root with ethanol (AL-1), and fractionated it with n-hexane (AL-2), ethyl acetate (AL-3), n-butanol (AL-4), and water (AL-5). Among these fractions, AL-2 contained components with the most effective hypolipidemic potential in human hepatoma HepG2 cells. AL-2 decreased the expression of fatty acid synthase (FASN) and inhibited the activity of acetyl-coenzyme A carboxylase (ACC) by stimulating AMP-activated protein kinase (AMPK) through the LKB1 pathway. Three active compounds were identified from the AL-2, namely α-linolenic acid, methyl α-linolenate, and methyl oleate. These results suggest that burdock root is expected to be useful for body weight management.     

High Yield of Wax Ester Synthesized from Cetyl Alcohol and Octanoic Acid by Lipozyme RMIM and Novozym 435

Wax esters are long-chain esters that have been widely applied in premium lubricants, parting agents, antifoaming agents and cosmetics. In this study, the biocatalytic preparation of a specific wax ester, cetyl octanoate, is performed in n-hexane using two commercial immobilized lipases, i.e., Lipozyme^® RMIM (Rhizomucor miehei) and Novozym^® 435 (Candida antarctica). Response surface methodology (RSM) and 5-level-4-factor central composite rotatable design (CCRD) are employed to evaluate the effects of reaction time (1–5 h), reaction temperature (45–65 °C), substrate molar ratio (1–3:1), and enzyme amount (10%–50%) on the yield of cetyl octanoate. Using RSM to optimize the reaction, the maximum yields reached 94% and 98% using Lipozyme^® RMIM and Novozym^® 435, respectively. The optimum conditions for synthesis of cetyl octanoate by both lipases are established and compared. Novozym^® 435 proves to be a more efficient biocatalyst than Lipozyme^® RMIM.