Fine structure of tooth enamel in the yellowing human teeth: SEM and HRTEM studies

Objective : The aim of this study was to clarify an influence of the fine structure of human tooth enamel to the yellowing teeth. Materials and methods : Sound maxillary first premolars of 15–50‐year‐old females that were extracted for the orthodontic treatment were used as the test samples. The tooth enamel sections of these teeth that prepared by ion polishing were observed by scanning electron microscopy (SEM). Furthermore, the fine structure of substance filling the inter‐rod spaces was analyzed by high resolution transmission electron microscopy (HRTEM). Results : In white tooth, the inter‐rod spaces were observed at the width of about 0.1 μm, while in yellow tooth, the inter‐rod spaces were not clearly observed by SEM. HRTEM observations revealed for the first time that the inter‐rod spaces were filled with fine particles of poorly crystallized hydroxyapatite in the yellow tooth. In yellow tooth, it was considered that the color of the inner dentin was recognized due to the decrease of light scattering by filling the tooth enamel inter‐rod spaces. The generation of particles in the tooth enamel inter‐rod spaces was considered to be caused by the long‐time progression of calcification. Conclusions : These results suggested that the change in fine structure, filling in inter‐rod spaces of tooth enamel, was related to progression of calcification in the inter‐rod spaces with advancing age and one of the factors of yellowness of human tooth. Microsc. Res. Tech. 79:14–22, 2016. © 2015 Wiley Periodicals, Inc.     

Preparation of mesoporous silica replica using ordered mesoporous carbon by vapor phase transport of silica source

A new vapor phase transport (VPT) technique to prepare an inverse silica replica of an ordered mesoporous carbon was developed. Tetraethyl orthosilicate (TEOS) was infiltrated in mesoporous carbon CMK-3 as the hard template at 180 °C for 48 h under an autogenous pressure in an autoclave in the presence of water. The samples obtained by removal of CMK-3 retained structural regularity of CMK-3 with little shrinkage of framework, which were characterized by SAXRD, N₂ adsorption, TG-DTA, and SEM. Influence of preparation temperature on the loading amount of silica was investigated. The multi-step replication process was monitored by characterizing the replicated materials as well as intermediate composites.     

Examples of metal and resin processing using high power diode lasers

In this work, the pitting corrosion resistance of welding duplex stainless steel 2205 was studied. Joints were made using the GMAW process with different fillers: duplex ER 2209 and two austenitic fillers (ER 316LSi and ER 308LSi). The microstructure obtained with the duplex ER 2209 filler is similar to the duplex 2205 base material, but the joints produced with the austenitic fillers cause a decrease of the α/γ phase ratio. In order to evaluate the influence of the filler on the weld, the pitting corrosion resistance was determined by means of an electrochemical critical pitting temperature test, and the mechanical properties by the hardness test. The phase imbalance produced for the different fillers causes variation of the pitting corrosion resistance and the mechanical properties. The variation in the mechanical properties of the material was also studied by means of hardness tests.     

l-Ascorbic acid as an alternative fuel for direct oxidation fuel cells

l-Ascorbic acid (AA) was directly supplied to polymer electrolyte fuel cells (PEFCs) as an alternative fuel. Only dehydroascorbic acid (DHAA) was detected as a product released by the electrochemical oxidation of AA via a two-electron transfer process regardless of the anode catalyst used. The ionomer in the anode may inhibit the mass transfer of AA to the reaction sites by electrostatic repulsion. In addition, polymer resins without an ionic group such as poly(vinylidene fluoride) and poly(vinyl butyral) were also useful for reducing the contact resistance between Nafion membrane and carbon black used as an anode, although an ionomer like Nafion is needed for typical PEFCs. A reaction mechanism at the two-phase boundaries between AA and carbon black was proposed for the anode structure of DAAFCs, since lack of the proton conductivity was compensated by AA. There was too little crossover of AA through a Nafion membrane to cause a serious technical problem. The best performance (maximum power density of 16 mW cm⁻²) was attained with a Vulcan XC72 anode that included 5 wt.% Nafion at room temperature, which was about one-third of that for a DMFC with a PtRu anode.     

Plastic resin pellets as a transport medium for toxic chemicals in the marine environment

Plastic resin pellets (small granules 0.1-0.5 centimeters in diameter) are widely distributed in the ocean all over the world. They are an industrial raw material for the plastic industry and are unintentionally released to the environment both during manufacturing and transport. They are sometimes ingested by seabirds and other marine organisms, and their adverse effects on organisms are a concern. In the present study, PCBs, DDE, and nonylphenols (NP) were detected in polypropylene (PP) resin pellets collected from four Japanese coasts. Concentrations of PCBs (4-117 ng/g), DDE (0.16-3.1 ng/g), and NP (0.13-16 microg/g) varied among the sampling sites. These concentrations were comparable to those for suspended particles and bottom sediments collected from the same area as the pellets. Field adsorption experiments using PP virgin pellets demonstrated significant and steady increase in PCBs and DDE concentrations throughout the six-day experiment, indicating that the source of PCBs and DDE is ambient seawater and that adsorption to pellet surfaces is the mechanism of enrichment. The major source of NP in the marine PP resin pellets was thought to be plastic additives and/or their degradation products. Comparison of PCBs and DDE concentrations in mari     

Variable temperature neutron diffraction studies of single crystals of LiND2

We have synthesized a single crystal of lithium amide (LiNH₂, LiND₂) by melting method, and performed neutron diffraction of the single crystal at variable temperature. LiND₂ is tetragonal structure and I-4 space group. Lattice parameters and unit cell volume of LiND₂ at room temperature, 50 °C, 100 °C, 150 °C and 200 °C were determined. Both of the lattice parameters and the unit cell volume increase with increase of temperature. From these results, we have estimated coefficient of volumetric thermal expansion α_V of LiND₂ to be 222 × 10⁻⁶/K. With increase of temperature, all thermal ellipsoids gradually expand because of thermal vibration.     

Study on the Effects of Flow in the Volute Casing on the Performance of a Sirocco Fan

The flow at the exit from the runner blade of a centrifugal fan with forward curved blades (a sirocco fan) sometimes separates and becomes unstable. We have conducted many researches on the impeller shape of a sirocco fan, proper inlet and exit blade angles were considered to obtain optimum performance. In this paper, the casing shape were decided by changing the circumferential angle, magnifying angle and the width, 21 sorts of casings were used. Performance tests, inner flow velocity and pressure distributions were measured as well. Computational fluid dynamic calculations were also made and compared with the experimental results. Finally, the most suitable casing shape for best performance is considered.     

Characterization of the Thermo-Viscoelastic Property of Glass and Numerical Simulation of the Press Molding of Glass Lens

A measurement technique for obtaining the thermo-viscoelastic properties of glass with high accuracy is discussed. An unidirectional compression creep test was employed to measure the relaxation modulus of the glass specimens. The creep function derived from the experimental creep test is approximated by a generalized Voigt model, and then converted into a relaxation modulus expressed by a generalized Maxwell model using the Laplace transform and its inversion. Relaxation moduli and shift factors of the glass specimens BK-7 and TaF-3 were estimated according to the presented procedure, and the accuracy of the relaxation modulus was verified by a numerical demonstration using finite element analysis. A fundamental numerical simulation of the press molding of glass lenses was carried out to illustrate the validity of the thermo-viscoelastic properties obtained by the presented approach. Residual stresses under processing conditions were estimated, and the optimal conditions for residual stress minimization are discussed.