Polymer film-type channel electron multipliers: Their characteristics and comparison with bulk-type flexible multipliers

Polymer film-type channel electron multipliers (CEMs) were developed and their characteristics investigated in comparison with bulk-type flexible CEM. As film-type CEMs, a paint-coating-type CEM and a solvent-etching-type CEM were fabricated. The paint-coating-type CEM is made by coating a “paint” which is prepared by dissolving in a solvent an electronically conductive polymeric composition having a high secondary electron emission yield. Up to the present study the mean gain of the film-type CEM, in spite of the lower resistivity of the dynode, seems to be slightly more dependent on the count rate than that of the bulk-type CEM made of the same material. However, the convenience of fabricating the dynode film by coating the dynode-forming paint on the internal surface of any shaped tube or a flexible polymer tube would overcome the slight disadvantage mentioned above.     

Analytical Model for Redistribution Profile of Ion-Implanted Impurities During Solid-Phase Epitaxy

We evaluated the redistribution profiles of ion-implanted impurities during solid-phase epitaxy using Rutherford backscattering spectrometry (RBS). RBS data revealed that the As concentration changes only near the moving amorphous/crystal interface. We derived an analytical model for the redistribution profiles using a segregation coefficient m between amorphous and crystalline Si, introduced a parameter of reaction length l that is the distance where impurities were exchanged, and obtained good agreement with experimental data with an m value of 3 and an l value of 1 nm for As. Furthermore, we applied our model to P and B redistribution profiles and obtained good agreement with corresponding m value of 4 and l value of 1 nm for P and m value of 0.3 and l value of 1 nm for B     

Structural collapse analysis of framed structures under impact loads using ASI-Gauss finite element method

The main objective of this study is to devise a technique, which, when implemented into finite-element codes, is efficiently applicable to impact collapse analyses of framed structures. In this study, the formerly developed adaptively shifted integration (ASI) technique for the linear Timoshenko beam element is modified into the ASI-Gauss technique by placing the numerical integration points of the two consecutive elements forming an elastically deformed member in such a way that stresses and strains are evaluated at the Gaussian integration points of the two-element member. On comparison with the ASI technique, the ASI-Gauss technique proves its higher accuracy and efficiency in elastic range. Moreover, instead of applying impact loads in the form of nodal forces, we consider the impact phenomenon by means of contacts between the elements involved and the elemental contact algorithm is verified from the point of conservation of energy. Impact analyses considering member fracture with different sets of parameters are performed using a high-rise framed structure and a small aircraft. From the results obtained, we can observe propagation phenomena of impact loads and shock waves. Also, a proper difference in impact damage is obtained by different sets of parameters. The results also indicate that the mass of the aircraft has a stronger influence on impact damage than its velocity. Moreover, soon after impact, tensile stresses are observed in the columns that were compressed by dead loads before impact.     

Supercritical CO2 extraction of essential oils and cuticular waxes from peppermint leaves

Essential oils and cuticular waxes were extracted from peppermint leaves with supercritical carbon dioxide in a semicontinuous-flow extractor. The effects of CO₂ flow rate and pressure on the extraction rate were studied within the flow rate range of (4·1–9·8) × 10⁻⁵ kg s⁻¹ and the pressure range of 10–30 MPa. Flow rate effect indicated that the intraparticle diffusion resistance was not dominant in this process. The extraction rate of cuticular waxes increased remarkably with the pressure, whereas that of essential oils was almost constant as compared with cuticular waxes. The concentration of cuticular waxes at the exit of the extractor was close to the solubility of triacontane while that of essential oils was much lower than the solubility of 1-menthol.     

Structural Investigation of 95(0.6Li2S0.4SiS2)5Li4SiO4 Oxysulfide Glass by Using X-ray Photoelectron Spectroscopy

S2 p and O1 s photoelectron spectra were obtained for the 95(0.6Li₂S0.4SiS₂)5Li₄SiO₄ oxysulfide glass prepared by twin-roller quenching. A four-peak deconvolution technique was used to separate the S2 p peak of the glass into the components of bridging and nonbridging sulfur atoms. As a result of the deconvolution of the S2 p peak, we found that ∼92% of the sulfur atoms were present as nonbridging atoms. The O1 s peak of the glass was separated into two components: bridging and nonbridging oxygen atoms. This separation of the O1 s peak indicated that ∼85% of the oxygen atoms were present as bridging oxygen atoms.     

Fluid circulation and heat extraction from engineered geothermal reservoirs

A large amount of fluid circulation and heat extraction (i.e., thermal power production) research and testing has been conducted on engineered geothermal reservoirs in the past 15 years. In confined reservoirs, which best represent the original Hot Dry Rock concept, the flow distribution at any given time is primarily determined by three parameters: (1) the nature of the interconnected network of pressure-stimulated joints and open fractures within the flow-accessible reservoir region, (2) the mean pressure in the reservoir, and (3) the cumulative amount of fluid circulation—and therefore reservoir cooling—that has occurred. For an initial reservoir rock temperature distribution and mean fluid outlet temperature, the rate of heat extraction (i.e., thermal power) is at first only a function of the production flow rate, since the production temperature can be expected to remain essentially constant for some time (months, or even years). However, as reservoir circulation proceeds, the production temperature will eventually start to decline, as determined by the mean effective joint spacing and the total flow-accessible (i.e., heat-transfer) volume of the reservoir. The rate of heat extraction, which depends on the production flow rate, can also vary with time as a result of continuing changes in the flow distribution arising from reservoir cooling.The thermal power of engineered reservoirs can most readily be increased by increasing the production flow rate, as long as this does not lead to premature cooldown, the development of short-circuit flow paths, or excessive water losses. Generally, an increase in flow rate can be accomplished by increasing the injection pressure within limits. This strategy increases the driving pressure drop across the reservoir and the mean reservoir pressure, which in turn reduces the reservoir flow impedance by increasing the amount of joint dilation. However, the usefulness of this strategy is limited to reservoir operating pressures below the fracture extension pressure, and may lead to excessive water losses, particularly in less-confined reservoirs. Under such conditions, a downhole production-well pump may be employed to increase productivity by recovering more of the injected fluid at lower mean reservoir operating pressures.     

Studies on thrust characteristics of high‐thrust spiral motor

Linear actuators are used in various industrial applications. Conventional linear actuators are a combination of a rotational motor and a ball screw, a hydraulic actuator, or a linear motor. However, these actuators have some demerits. This paper proposes a spiral motor (SPRM) that comprises a helical stator and a helical mover. Owing to its helical structure, the SPRM can be expected to show better performance compared to the conventional linear actuator. A stator and a mover are shown in Figs. 1 and 2, respectively. Helical motion is obtained by this motor and only linear motion is extracted by canceling rotational motion at the end effector. There are two types of SPRMs. One has no ball screw on the output axis, while the other has a ball screw. The former can be used in a direct drive system. However, the gap between the stator and the mover should be controlled because the motor is a magnetic levitation system without a ball screw. Further, the motor requires two three‐phase inverters. The other motor is easy to control because it does not require gap control. However, the motor is inferior to the first motor with regard to position control since the friction in this motor is larger. In this study, a prototype of the SPRM is developed. The prototype constructed is a motor with a ball screw. In this motor, the stator and mover are made of block cells. The stator block is shown in Fig. 3 and the mover block is shown in Fig. 4. The prototype of the SPRM shown in Fig. 5, is developed by using these two blocks. An experiment is conducted to examine the driving of the SPRM. The experimental result is shown in Fig. 6. From this result, it is evident that comprising a helical stator and a helical mover can generate linear motion. Another experiment is conducted for measuring the thrust characteristic of the motor. The result obtained is shown in Fig. 7. From the figure, the thrust constant of the spiral motor, K_f, is obtained as 538.0 N/A. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(2): 58–64, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21168     

A generation method of artificial fluctuation data of wind power output considering smoothing effect

To use realistic wind power fluctuation data is important in simulating frequency change of power systems. It is well known that the smoothing effect must be taken into account when generating the artificial wind power output. Therefore, this paper proposed a new method to generate fluctuation waveform considering smoothing effect based on random number to fulfill the correlation among multiple sites and autoregression model. The effectiveness of the proposed method was tested by using practical wind speed data measured in Tohoku district.