The effect of butter grains on physical properties of butter-like emulsions

Milk fat exists as globules in its natural state in milk. The potential of using globular fat to modulate the rheological properties and crystallization behavior in butter-like emulsions was studied in the present work. We conducted a comparative study of butter-like emulsions, with a fat phase consisting of 0, 10, 25, 50, or 100% anhydrous milk fat (AMF), the remaining fat being butter grains, and all samples containing 20% water, to obtain systematic variation in the ratio of globular fat. All emulsions were studied over 4 wk of storage at 5°C. By combining small and large deformation rheology, we conducted a detailed characterization of the rheological behavior of butter-like emulsions. We applied differential scanning calorimetry to monitor thermal behavior, confocal laser scanning microscopy for microstructural analysis, and low-field pulsed nuclear magnetic resonance spectrometry to measure solid fat content. By combining these techniques, we determined that increasing the fraction of globular fat (by mixing with butter grains) decreases the hardness of butter-like emulsions up to an order of magnitude at d 1. However, no difference was observed in thermal behavior as a function of butter grain content, as all emulsions containing butter grains revealed 2 endothermal peaks corresponding to the high (32.7°C ± 0.6) and medium (14.6°C ± 0.1) melting fractions of fatty acids. In terms of microstructure, decreasing the amount of butter grains in the emulsions resulted in formation of a denser fat crystal network, corresponding to increased hardness. Moreover, microstructural analysis revealed that the presence of butter grains resulted in faster formation of a continuous fat crystal network compared with the 100% AMF sample, which was dominated by crystal clusters surrounded by liquid oil. During storage, hardness remained stable and no changes in thermal behavior were observed, despite an increase in solid fat content of up to 5%. After 28 d of storage, we observed no difference in either microstructural or rheological properties, indicating that formation of primary bonds occurs primarily within the first day of storage. The rheological behavior of butter-like emulsions is not determined solely by hardness, but also by stiffness related to secondary bonds within the fat crystal network. The complex rheological behavior of milk fat-based emulsions is better characterized using multiple parameters.     

An analysis of interleukin-8, interleukin-6 and C-reactive protein serum concentrations to predict fever, gram-negative bacteremia and complicated infection in neutropenic cancer patients

A prospective study was performed to assess the potential value of interleukin (IL)-8, IL-6, and C-reactive protein (CRP) serum levels to predict fever, gram-negative bacteremia and complicated infection in neutropenic patients with cancer. Serum samples were obtained three times a week during 208 neutropenic episodes following cytotoxic chemotherapy. Fever of any cause developed during 104 out of 191 evaluable episodes. Serum levels of neither cytokine nor CRP were predictive of fever within more than 24 h before its onset. Unlike CRP, both IL-6 and IL-8 serum levels were significantly different between microbiologically documented infections and unexplained fevers. The highest values of IL-6 and IL-8 were observed in episodes of gram-negative bacteremia. Using receiver-operating-characteristic curves, the analysis of cytokine levels measured around the onset of fever indicated that IL-8 is potentially useful for predicting gram-negative bacteremia, with a high negative predictive value of > 90% and a moderate positive predictive value of 50% (sensitivity, 70%; specificity, 91%). In patients with persistent fever, predictions of further clinical complications, defined as prolonged fever of more than 7 days' duration, pneumonia, shock and/or death due to infection, were best predicted by IL-6. With an IL-6 cutoff value of 250 pg/ml in samples obtained 8 to 32 h after onset of fever, the positive predictive value was 92%, the negative predictive value 91% (sensitivity, 85%; specificity, 95%). The positive predictive value of IL-6 in samples obtained another 24 h later from patients still febrile remained > 90%, but the negative predictive value dropped to 47%. In any of the analyses, the predictive values of CRP levels were poor and inferior to either cytokine. These findings may have clinical value in identifying subgroups of patients requiring different therapeutic approaches.     

Influence of molecular tilt angle on the SHG response of pyroelectric liquid crystal polymers

Second harmonic generation in novel pyroelectric liquid crystal polymers (PLCP) made from a series binary mixtures, was studied using 1100 nm as the fundamental wavelength. The PLCPs were prepared by photo-polymerization of binary mixtures of two monomers which exhibit a smectic C^* phase, A2c (4″-(R)-(−)-2-[(10-acrylo-yloxy)decyl]oxy-3-nitrophenyl 4-{4′-[(11-acryloyloxy)-undecyloxy]phenyl}benzoate) and Alb (4″-((R)-(+)-2-octyloxy)-3″-nitrophenyl 4-(4′-(11-acryloyloxy)undecyloxy)-phenyl)-benzoate). The highest d₁₆ and d₂₃ coefficients were found to be in the range 0.65–0.8 pm/V, and differed depending on the detailed preparation of the sample. All cases of polymers formed from the chiral smectic C* phase showed an SHG-signal with no external field present, indicating that polar order became fixed. The SHG-signal was found to increase with the tilt angle of the FLC molecules.     

Surface roughness measurement on machined surfaces using angular speckle correlation

Surface roughness is of great importance in fields, such as tribology, semiconductor technology and medicine. Stylus techniques, in which a stylus is drawn along the surface and the vertical movement of the stylus is recorded, have been used traditionally in measuring surface roughness. Non-contact methods, such as optical ones, have the advantage that they can be used for the in-process measurement of surface roughness. In this paper, results of the measurement of surface roughness using angular speckle-correlation on machined surfaces are presented. Surfaces of approximately 1.6 < R_a < 6.3 μm have been measured, the surfaces being classified in the same manner as when using a stylus instrument. ASC is a technique that also allows in-process measurement of the roughness of surfaces on machined surfaces. A new technique to achieve increased repeatability by using an angle detection unit is also presented in this paper.     

Buchbesprechungen

Ohne Zusammenfassung

---

Book reviews

     

Sociomaterial actors in the assimilation gap: a case study of web service, management and IT-assimilation

This paper investigates the conditions for the assimilation of information systems (IS) and information technology (IT) in organizations and the influence of various actors in the organization and eBusiness context. To do so it draws on the literature on assimilation gap, sociomateriality and infrastructure together with a study of implementation and use of information and communication technology in and among organizations in a Swedish region. There were substantial investments in web infrastructure made on a regional level and the focus of this study is how the investments were transformed and assimilated in practices, relations and communication. Based on the empirical data from the case study, the paper extends the assimilation process into interplay among actors in organizations contexts. It describes organizations’ strategies for coping with their needs for information and the actors in these processes. Two categories of actors are identified, sensemaking and sensegiving actors, as most important in assimilation of IS/IT in organizations. A sociomaterial perspective gives guidance and a better understanding of the assimilation process in terms of knowledge and interpretative frames, and how assimilation involves identity construction and negotiations among sensemaking and sensegiving actors. The contribution of this paper is a better understanding of the context of assimilation and adaptation of IT in organizations’ business processes, and steps to be taken to improve readiness.     

Luminescent Conjugated Oligothiophenes for Sensitive Fluorescent Assignment of Protein Inclusion Bodies

Small hydrophobic ligands identifying intracellular protein deposits are of great interest, as protein inclusion bodies are the pathological hallmark of several degenerative diseases. Here we report that fluorescent amyloid ligands, termed luminescent conjugated oligothiophenes (LCOs), rapidly and with high sensitivity detect protein inclusion bodies in skeletal muscle tissue from patients with sporadic inclusion body myositis (s‐IBM). LCOs having a conjugated backbone of at least five thiophene units emitted strong fluorescence upon binding, and showed co‐localization with proteins reported to accumulate in s‐IBM protein inclusion bodies. Compared with conventional amyloid ligands, LCOs identified a larger fraction of immunopositive inclusion bodies. When the conjugated thiophene backbone was extended with terminal carboxyl groups, the LCO revealed striking spectral differences between distinct protein inclusion bodies. We conclude that 1) LCOs are sensitive, rapid and powerful tools for identifying protein inclusion bodies and 2) LCOs identify a wider range of protein inclusion bodies than conventional amyloid ligands.     

Katalysatoruntersuchungen an einer Technikumsanlage für Biomasse‐Kleinfeuerungen

In addition to the reduction of particulate matter, a catalytic supported emission reduction in small scale biomass combustion systems can also enable a conversion of toxic organic components into carbon dioxide and water. For catalyst investigations under practical conditions a special test facility was designed. The results show that products of incomplete combustion like carbon monoxide from stoves can be reduced by catalytic processes. Further developments and studies are necessary to achieve the targeted emission limits.     

Supplier credits, limited liquidity, and timely demand information

We consider supplier-credit contracting between a manufacturer and a liquidity-constrained dealer. We show that the timeliness according to which the dealer receives demand information has a significant impact on the optimal contract. If the manufacturer cannot be sure that a dealer without liquidity has demand information when the contract is written, the optimal contract assigns the same quantity to an ignorant dealer and a dealer who knows that there are unfavorable demand conditions. However, dealers with favorable demand information are screened. If the dealer??s liquidity rises, the manufacturer proposes a contract that resembles the solution of a classic adverse selection model in the spirit of Harris et?al. (Manag Sci 28:604?C620, 1982). For high liquidity, the optimal supplier-credit contract assigns the same quantity to an ignorant dealer and dealers who have favorable demand information whereas dealers with unfavorable demand information are screened.     

Food-web structure in low- and high-dimensional trophic niche spaces

A question central to modelling and, ultimately, managing food webs concerns the dimensionality of trophic niche space, that is, the number of independent traits relevant for determining consumer–resource links. Food-web topologies can often be interpreted by assuming resource traits to be specified by points along a line and each consumer''s diet to be given by resources contained in an interval on this line. This phenomenon, called intervality, has been known for 30 years and is widely acknowledged to indicate that trophic niche space is close to one-dimensional. We show that the degrees of intervality observed in nature can be reproduced in arbitrary-dimensional trophic niche spaces, provided that the processes of evolutionary diversification and adaptation are taken into account. Contrary to expectations, intervality is least pronounced at intermediate dimensions and steadily improves towards lower- and higher-dimensional trophic niche spaces.