A DSC study of curative interactions. III. The interaction of TMTM with ZnO,sulfur, and stearic acid

The interaction among various combinations of sulfur, tetramethylthiuram monosulphide (TMTM), ZnO, and stearic acid were studied by differential scanning calorimetry in the absence of rubber. Sulfur and TMTM reacted to form tetramethylthiuram disulphide, and the ternary eutectic mixture melted at about 80°C. The absence of the S_γ → S_μ transition in sulfur/TMTM mixes was related to a sulfur/TMTM interaction, wherein the eightmembered sulfur rings were opened at temperatures well below 170°C. The interaction of stearic acid with TMTM led to the decomposition of TMTM, but the reaction was largely suppressed when both ZnO and sulfur were present in the mixture. No evidence was found for the formation of a zinc-accelerator complex of the type normally attributed a role in the accelerated sulfur vulcanization.     

A DSC study of curative interactions. IV. The interaction of tetramethylthiuram disulfide with ZnO,sulfur, and stearic acid

The interaction of combinations of sulfur, tetramethylthiuram disulfide (TMTD), ZnO, and stearic acid were investigated by differential scanning calorimetry in the absence of rubber. TMTD decomposed partially to tetramethylthiuram monosulphide on liquefaction. Sulfur and TMTD reacted at vulcanization temperatures, and although the exact composition of all the products was not established, several features involving DSC and HPLC analysis were interpreted in terms of the formation of tetramethylthiuram polysulfides (TMTP). TMTD decomposed much faster to volatile products such as Me₂NH, CS₂, and CS when heated in the presence of stearic acid. Contrary to literature reports on the facile reaction of TMTD and ZnO to yield zinc perthiomercaptides (or zinc dimethyldithiocarbamate), the TMTD/ZnO reaction was found to be extremely sluggish under a variety of conditions. In the presence of sulfur, too, the TMTD/ZnO reaction was of negligible importance. It was inferred that several reactions occurred concurrently on heating a TMTD/stearic acid/ZnO system. These reactions were not observed for the sulfur/TMTD/stearic acid/ZnO mixture per se, but, instead, the stearic acid/ZnO reaction was very prominent. The formation of zinc stearate occurred at temperatures as low as 77°C in the quadruple system. TMTD and zinc stearate were virtually unreactive at vulcanization temperatures. None of the reactions involving ZnO could be attributed to the formation of a zinc perthiomercaptide, generally accepted to be a precursor in thiuram vulcanization.     

Polymerization Catalysis in Liquid Propylene: High Activities and Molecular Weights in Propylene/CO Copolymerization Reactions

Summary: The dicationic [(dppp)Pd(NCCH₃)₂](BF₄)₂ catalyst (dppp = 1,3‐bis(diphenylphosphino)propane) was applied in a liquid monomer, two phase process for the CO/propene copolymerization reaction. For the first time it was possible to synthesize propene/CO copolymers with an activity up to 7 500 g/(mol · h) and molecular weights of 500 000 g/mol. Activities up to 40 000 g/(mol · h) could be obtained with the use of the unsymmetric catalyst [(CF₃‐dppp)Pd(NCCH₃)](BF₄)₂ (CF₃‐dppp = 1‐diphenylphosphino‐3‐bis[3,5‐di(trifluormethyl)phenyl]phosphinopropane) in homogeneous liquid propene solution.

Granules found after copolymerization.     

Surface-state electrons on a hydrogen film. 1. Annealing of the film

We have investigated the surface of thin films (thickness 2 µm) of solid H₂ between 1.5 and 4.2 K by measuring the ac conductivity of surface-state electrons (SSE). The films were prepared on a glass substrate by quench condensation at 1.5 K and were therefore initially strongly disordered. In fact the surface of the virgin films before any heat treatment was so rough that no current due to SSE could be observed. Annealing the films decreased the surface roughness and gave rise to a thermal-activation-type temperature dependence of the SSE conductivity. By proper heat treatment up to 8 K the activation energy could be reduced to 10k _B.On leave from the Hyogo University of Teacher Education, Shimokume 942-1, Yashiro, 673-14, Japan.     

A New Research Infrastructure for Investigating Flow Hydraulics and Process Equipment at Critical Fluid Properties

An optimized equipment design for natural gas processing and liquefaction plants becomes increasingly difficult with changing process conditions: Particularly low values of surface tension create rising challenges on the design of phase separators and column internals. The TERESA test rig at HZDR was designed to allow the investigation of multiphase thermohydraulics and phase separator performance under critical fluid properties in industrial dimensions. A versatile pipe test section is available in DN200 and equipment internals may be tested in a sectional DN300/DN500 test separator. The applied test fluid shows a high vapor-liquid density difference between 1470 and 940 kg m⁻³, viscosity as low as 0.12 mm²s⁻¹, and surface tension down to 1.3 mN m⁻¹. Volumetric liquid and vapor flow rates may be varied up to 9 and 530 m³h⁻¹ in the test rig, respectively.     

Elastic modulus measurements via laser-ultrasonic and knoop indentation techniques in thermally sprayed coatings

Nondestructive techniques for evaluating and characterizing coatings were extensively demanded by the thermal spray community; nonetheless, few results have been produced in practice due to difficulties in analyzing the complex structure of thermal spray coatings. Of particular interest is knowledge of the elastic modulus values and Poisson’s ratios, which are very important when seeking to understand and/or model the mechanical behavior or to develop life prediction models of thermal spray coatings used in various applications (e.g., wear, fatigue, and high temperatures). In the current study, two techniques, laser-ultrasonics and Knoop indentation, were used to determine the elastic modulus of thermal spray coatings. Laser-ultrasonics is a noncontact and nondestructive evaluation method that uses lasers to generate and detect ultrasound. Ultrasonic velocities in a material are directly related to its elastic modulus value. The Knoop indentation technique, which has been widely used as a method for determining elastic modulus values, was used to compare and validate the measurements of the laser-ultrasonic technique. The determination of elastic modulus values via the Knoop indentation technique is based on the measurement of elastic recovery of the dimensions of the Knoop indentation impression. The approach used in the current study was to focus on evaluating the elastic modulus of very uniform, dense, and near-isotropic titania and WC-Co thermal spray coatings using these two techniques. Four different coatings were evaluated: two titania coatings produced by air plasma spray (APS) and high-velocity oxyfuel (HVOF) and two types of WC-Co coatings, conventional and multimodal (nanostructured and microsized particles), deposited by HVOF. The original version of this article was published as part of the ASM Proceedings, Thermal Spray 2003: Advancing the Science and Applying the Technology, International Thermal Spray Conference (Orlando, FL), 5–8 May, 2003, Basil R. Marple and Christian Moreau, Eds., ASM International, 2003.     

Online Bi-Objective Scheduling for IaaS Clouds Ensuring Quality of Service

This paper focuses on a bi-objective experimental evaluation of online scheduling in the Infrastructure as a Service model of Cloud computing regarding income and power consumption objectives. In this model, customers have the choice between different service levels. Each service level is associated with a price per unit of job execution time, and a slack factor that determines the maximal time span to deliver the requested amount of computing resources. The system, via the scheduling algorithms, is responsible to guarantee the corresponding quality of service for all accepted jobs. Since we do not consider any optimistic scheduling approach, a job cannot be accepted if its service guarantee will not be observed assuming that all accepted jobs receive the requested resources. In this article, we analyze several scheduling algorithms with different cloud configurations and workloads, considering the maximization of the provider income and minimization of the total power consumption of a schedule. We distinguish algorithms depending on the type and amount of information they require: knowledge free, energy-aware, and speed-aware. First, to provide effective guidance in choosing a good strategy, we present a joint analysis of two conflicting goals based on the degradation in performance. The study addresses the behavior of each strategy under each metric. We assess the performance of different scheduling algorithms by determining a set of non-dominated solutions that approximate the Pareto optimal set. We use a set coverage metric to compare the scheduling algorithms in terms of Pareto dominance. We claim that a rather simple scheduling approach can provide the best energy and income trade-offs. This scheduling algorithm performs well in different scenarios with a variety of workloads and cloud configurations.     

Are My Neighbours Ageing Yet? Local Dimensions of Demographic Change in German Cities

Among the highly developed countries, demographic ageing is particularly advanced in Germany. Accentuated by migration, there is great regional variation in the progress of demographic change. Within urban areas, residential neighbourhoods differ considerably in their demographic composition and perspectives. Based on municipal data, this paper examines regional variability in the diversity and pace of neighbourhood-level ageing. Focusing on the Rhine-Ruhr conurbation in North Rhine-Westphalia, the analysis outlines at what pace ageing proceeds in a variety of neighbourhoods, which attract no constant influx of working-age migrants. After decades of suburbanisation, in the period from 1998 to 2008 regional migration concentrated on the central districts of large cities. More profoundly in the most prosperous cities growing in population than in other cities, childless working-age adults separate from other age groups and family types in selected central city quarters. The findings suggest that spatial differentials in ageing are likely to affect future location decisions and, thereby, regional and local prosperity.     

Versioning XML-based office documents

The ability to reliably merge independent updates of a document is a crucial prerequisite to efficient collaboration in office work. However, merge support for common office document standards like OpenDocument or OfficeOpenXML is still in its infancy. In this paper, we present a consistent versioning model for XML documents in general including merge support. This is achieved by using context-aware fingerprints that identify edit operations and allow for a conflict detection. We show how to extract tracked changes from office documents and map them on our delta model. Experimental results indicate that our fingerprinting technique is efficient and reliable.