Shear strength of lead,tin, copper,aluminum., corundum,and fluoroplastic-4 behind a shock wave

On the basis of the results of measurements in the pressure range 3.5–11 GPa for the shear strength of a number of shock-compressed substances carried out taking account of the completion of relaxation processes and establishment of pressure equilibrium the divergence is explained in results published previously for measurements of the dynamic yield point for highly ductile metals of the lead and tin type.Translated from Problemy Prochnosti, No. 10, pp. 50–54, October, 1991.     

Calculation of stress concentration in the manipulator element using a combined finite and boundary element method

Elastic stress concentration in a manipulator element is calculated within the framework of the two-dimensional stressed state model. The purpose here is to make recommendations for selecting the radius of joining of the beam parts of the element based on analysis of maximum stresses in the stress concentration zone. Combination of the finite element and boundary element methods is proposed for solving the problem. A coarse finite element subdivision is used for the initial calculation for the entire element. Then, the solution is refined by using boundary elements in the identified zone. Comparison of calculation results with solutions obtained by the finite element and boundary element methods points to the effectiveness of the proposed algorithm for stress concentration calculations.Translated from Problemy Prochnosti, No. 6, pp. 72–74, June, 1991.     

ESD–RF co-design methodology for the state of the art RF-CMOS blocks

This paper describes an approach to design ESD protection for integrated low noise amplifier (LNA) circuits used in narrowband transceiver front-ends. The RF constraints on the implementation of ESD protection devices are relaxed by co-designing the RF and the ESD blocks, considering them as one single circuit to optimise. The method is applied for the design of 0.25 μm CMOS LNA. Circuit protection levels higher than 3 kV HBM stress are achieved using conventional highly capacitive ggNMOS snapback devices. The methodology can be extended to other RF-CMOS circuits requiring ESD protection by merging the ESD devices in the functionality of the corresponding matching blocks.     

Exoatmospheric interception problem solved using output feedback law

Interception problems are often dealt with by separating guidance and autopilot design. Guidance law can be obtained using optimal control theory and autopilot design is performed on a linearized system. In this paper, we introduce a new approach that determines a global guidance and autopilot law, based on direct output feedback design. Application of this method to exoatmospheric interception problem results in good performances. Extension to endoatmospheric case is under investigation.     

Formation of ordered metal nanowire-inorganic salt composites

A new phenomenon accompanying the electrolysis of salts has been observed, whereby an ordered composite is formed under certain conditions (electrolyte composition, current density). The composite comprises an inorganic salt crystal penetrated by metal nano- and microwires. This phenomenon can serve as a basis for the technology of oriented and ordered nanowire array synthesis.     

Synthesis,characterization and ion exchange properties of zirconium(IV) tungstoiodophosphate,a new cation exchanger

Zirconium(IV) tungstoiodophosphate has been synthesized under a variety of conditions. The most chemically and thermally stable sample is prepared by adding a mixture of aqueous solutions of 0·5 mol L⁻¹ sodium tungstate, potassium iodate and 1 mol L⁻¹ orthophosphoric acid to aqueous solution of 0·1 mol L⁻¹ zirconium(IV) oxychloride. Its ion exchange capacity for Na⁺ and K⁺ was found to be 2·20 and 2·35 meq g⁻¹ dry exchanger, respectively. The material has been characterized on the basis of chemical composition, pH titration, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis. The effect on the exchange capacity of drying the exchanger at different temperatures has been studied. The analytical importance of the material has been established by quantitative separation of Pb²⁺ from other metal ions.     

The solution of the inverse problem of gravitational potential using a set of measurements of different field elements

A numerical solution of the inverse problem of the gravitational field at a single point is obtained using six field elements for a point, a spherical cap, a differential spherical sector and a vertical segment. In the system of six equations obtained, the unknowns are the mass of the body, the depth of its center, and the second, third, and fourth degree moments. The accuracy of the solution of this system is ten times higher than when using three field elements. __________ Translated from Izmeritel’naya Tekhnika, No. 5, pp. 3–8, May, 2007.     

On the possibility of development of defects in zirconium parts of thermal reactors during storage prior to and after operation

We have established that technological defects (cracks) in zirconium articles can develop in the course of long-term storage prior to their mounting in a reactor, which is caused by the action of residual stresses and hydrogen. We have considered the conditions of after-operation storage of zirconium articles of the fuel core of thermal reactors in water of the cooling ponds of reactors and in spent-fuel storehouses. The possibility of subsequent hydrogenation of these articles during their storage has been shown. Finally, we have studied the effect of hydrogen, absorbed in the course of storage, on the crack resistance of zirconium articles and the development of defects in them due to delayed hydride cracking. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 5, pp. 105–109, September–October, 2007.     

Indoor body-area channel model for narrowband communications

Using wireless sensors placed on a person to continuously monitor health information is a promising new application. At the same time, new low-power wireless standards such as Bluetooth and Zigbee have been proposed for short range, low data-rate communication matching the requirements of these bio-medical applications. However, there are currently few measurements or models describing propagation around the body. To address this problem, electromagnetic waves near the torso are measured and a statistical model is derived for communication in the 915 MHz and 2.45 GHz industrial, scientific and medical bands associated with Zigbee and Bluetooth. Measurement setup and statistical analysis are described.     

A One-Dimensional Nonlocal Damage-Plasticity Model for Ductile Materials

This paper presents a new 1-D non-local damage-plasticity deformation model for ductile materials. It uses the thermodynamic framework described in Houlsby and Puzrin (2000) and holds, nevertheless, some similarities with Lemaitre’s (1971) approach. A 1D finite element (FE) model of a bar fixed at one end and loaded in tension at the other end is introduced. This simple model demonstrates how the approach can be implemented within the finite element framework, and that it is capable of capturing both the pre-peak hardening and post-peak softening (generally responsible for models instability) due to damage-induced stiffness and strength reduction characteristic of ductile materials. It is also shown that the approach has further advantages of achieving some degree of mesh independence, and of being able to capture deformation size effects. Finally, it is illustrated how the model permits the calculation of essential work of rupture (EWR), i.e. the specific energy per unit cross-sectional area that is needed to cause tensile failure of a specimen.