High performance laser with nanopatterned active layer by selective area epitaxy

Lasers containing a nanopatterned active layer demonstrating excellent threshold characteristics are presented. The nanopatterned active layer is fabricated using high-resolution electron beam lithography and selective-area metal organic chemical vapour deposition crystal growth. Results demonstrating an order of magnitude improvement over previous results are reported.     

A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

"Interactive use of lexical information in speech perception": Correction to Connine and Clifton.

Reports an error in "Interactive use of lexical information in speech perception" by Cynthia M. Connine and Charles Clifton (Journal of Experimental Psychology: Human Perception and Performance, 1987[May], Vol 13[2], 291-299). In the aforementioned article, Figures 1 and 2 were inadvertently transposed. The figure on p. 294 is actually Figure 2, and the figure on p. 296 is actually Figure 1. The captions are correct as they stand. (The following abstract of the original article appeared in record 1987-23984-001.) Two experiments are reported that demonstrate contextual effects on identification of speech voicing continua. Experiment 1 demonstrated the infuence of lexical knowledge on identification of ambiguous tokens from word–nonword and nonword–word continua. Reaction times for word and nonword responses showed a word advantage only for ambiguous stimulus tokens (at the category boundary); no word advantage was found for clear stimuli (at the continua endpoints). Experiment 2 demonstrated an effect of a postperceptual variable, monetary payoff, on nonword–nonword continua. Identification responses were influenced by monetary payoff, but reaction times for bias-consistent and bias-inconsistent responses did not differ at the category boundary. An advantage for bias-consistent responses was evident at the continua endpoints. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Antimony activities in copper mattes

A mass spectrometric technique combined with a double Knudsen cell was used to determine the antimony and copper activities in the Cu-Sb binary system at 1373 K and in the two-melt composition range of the Cu−S−Sb ternary system at 1423 K. The antimony and copper activities were calculated based on the intensity ration of the gaseous Sb and Cu species, over the unknown and known activity samples, respectively. γ _Sb ^o were found to be 1.1×10⁻² in molten copper at 1373 K, and 1.8×10⁻² and 0.44 in a copper-rich phase and in a matter phase, of the Cu−S−Sb ternary system at 1423 K, respectively. These values indicate, that antimony can be removed during the matte smelting and slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper slagging stage of the copper smelting process. Interaction parameters of antimony in molten copper at 1423 K were calculated and found to be 10.7, −5.4, and 6.3 for ε _Sb ^Sb · ρ_Sb ^Sb, and ε _Sb ^S , respectively. M. HINO, formerly Visiting Scientist at the University of Toronto     

Self-Adapting Linear Algebra Algorithms and Software

One of the main obstacles to the efficient solution of scientific problems is the problem of tuning software, both to the available architecture and to the user problem at hand. We describe approaches for obtaining tuned high-performance kernels and for automatically choosing suitable algorithms. Specifically, we describe the generation of dense and sparse Basic Linear Algebra Subprograms (BLAS) kernels, and the selection of linear solver algorithms. However, the ideas presented here extend beyond these areas, which can be considered proof of concept.     

The ground water behaviour pattern and foundation stabilisation practice at hartebeestfontein

Hartebeestfontein Gold Mining Company Limited, which produces 100 kg of gold per working day, has a mining lease area situated mainly over dolomite. A major river nearby governs the regional drainage. The formation of sinkholes and dolines, caused by fluctuations in the water table and the flow of water underground, often accelerated as the result of unavoidable or inadvertent surface activities, is common in such terranes. To maintain production, meticlous ground investigations under new installations plus periodic re-examination and stabilisation under existing ones, particularly key installations, is necessary. The local ground water behaviour pattern is controlled by three impervious major dykes and two major fissure zones, the latter draining surface water into the mine workings. Monthly water table measurements over 25 years show a steady rise to a limit over the area of one fissure zone and a drastic lowering over the other. The value of gravity techniques and thermal infra-red line scanning for cavity detection in the Hartebeestfontein context, is discussed. The procedures followed, for stabilising ground and foundations, are illustrated by means of case histories. The extension of the techniques, learnt from the stabilisation experience, to limiting water seepage into shafts sunk through dolomite, is also discussed.     

Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Comfort limits for asymmetric thermal radiation

Groups of 32 and 16 subjects of both sexes were exposed in an environmental chamber to radiant asymmetry caused by a cool wall, a warm wall, and a cool ceiling. Each subject was tested individually while seated and clothed at 0.6 clo. During each 3.5-hour experiment the subject was exposed to six radiant temperature asymmetries. He was asked whether and where he experienced any local cool or warm sensation, and whether it was felt to be uncomfortable. During the entire experiment he was kept thermally neutral by changing the air temperature according to his wishes.For cool walls, warm walls, and cool ceilings curves have been established showing the percentage of dissatisfied subjects as a function of the radiant asymmetry. Radiant asymmetry at a warm wall caused less discomfort than a cool wall. A cool ceiling caused less discomfort than a warm ceiling. Accepting that 5% of the subjects may feel uncomfortable. a radiant temperature asymmetry of 10°C is allowable at a cool wall, 23°C at a warm wall, and 14°C under a cool ceiling. A previous study showed that 4°C is allowable under a warm ceiling. Radiant asymmetry had no significant impact on the operative temperatures preferred by the subjects. No significant differences were observed between the responses of men and women exposed to radiant asymmetry.