Direct finite element design optimisation of the cagelessreluctance synchronous machine

The finite element analysis method is used directly in optimisation algorithms to optimise in multidimensions the design of the cageless reluctance synchronous machine. Two optimisation methods are evaluated to minimise or maximise the function value. These are the direction set method of Powell and the quasi-Newton algorithm. Both methods proved to be successful, with some advantages and disadvantages. Using these methods at a power level below 10 kW, results are given of structures of the reluctance synchronous machine which have been optimised according to specific criteria. Calculated and measured results show that the maximum torque optimum designed reluctance synchronous machine has the advantages of high power density and high efficiency     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Limited influence of the mesothelium on the influx of monocytes into the peritoneal cavity

Exposure of Farage, a human B-cell line, to interleukin 4 (IL4) reduced the amount of CD38 antigen on the surface of the cells and in cell lysates. No evidence was obtained for accelerated breakdown, shedding, or internalization of CD38 molecules following IL4 treatment, nor the accumulation of CD38 molecules in the cell interior. The inhibition of protein synthesis with cycloheximide (CXM) diminished the down-regulation of CD38 induced by IL4. CXM decreased the expression of CD38 in Farage cells with arrested mitosis, and IL4 failed to further reduce CD38 expression. Staurosporine, an inhibitor of serine/threonine protein kinases, and H7 (1-(5-isoquinolinylsulfonyl)-2-methylpiperazine), a preferential inhibitor of protein kinase C (PKC), abrogated the effect of IL4 on CD38, while inhibitors of other serine protein kinases W7 (N-(aminohexyl)-5-chloro-1-naphthalenesulfoamide) and H8 (N-(2-[methylamino]ethyl)-5-isoquinolinesulfonamide) failed to interfere with the effect of IL4. Phorbol 12-myristate 13-acetate (PMA), an activator of PKC, resembled IL4 in decreasing the expression of CD38, and either staurosporine or H7 abolished this effect. Genistein, an inhibitor of tyrosine kinases, increased the expression of CD38, but failed to abrogate the inhibitory effect of IL4 on CD38. It is concluded that serine/threonine protein kinases mediated the IL4-induced down-regulation of the expression of CD38 molecules in B cells.     

Bacillary angiomatosis and bacillary peliosis in patients infected with human immunodeficiency virus: clinical characteristics in a case-control study

Clinical characteristics associated with bacillary angiomatosis and bacillary peliosis (BAP) in patients with human immunodeficiency virus (HIV) infection were evaluated in a case-control study; 42 case-patients and 84 controls were matched by clinical care institution. Case-patients presented with fever (temperature, > 37.8 degrees C; 93%), a median CD4 lymphocyte count of 21/mm3, cutaneous or subcutaneous vascular lesions (55%), lymphadenopathy (21%), and/or abdominal symptoms (24%). Many case-patients experienced long delays between medical evaluation and diagnosis of BAP (median, 4 weeks; range, 1 day to 24 months). Case-patients were more likely than controls to have fever, lymphadenopathy, hepatomegaly, splenomegaly, a low CD4 lymphocyte count, anemia, or an elevated serum level of alkaline phosphatase (AP) (P < .001). In multivariate analysis, a CD4 lymphocyte count of < 200/mm3 (matched odds ratio [OR], 9.9; P < .09), anemia reflected by a hematocrit value of < 0.36 (OR, 19.7; P < .04), and an elevated AP level of > or = 2.6 mukat/L (OR, 23.9; P < .05) remained associated with disease after therapy with zidovudine was controlled for. BAP should be considered an AIDS-defining opportunistic infection and should be included in the differential diagnosis for febrile, HIV-infected patients with cutaneous or osteolytic lesions, lymphadenopathy, abdominal symptoms, anemia, or an elevated serum level of AP.     

Incomplete inversion and double-valued fundamental linewidth ofinfrared HeNe and HeXe lasers

We have measured the quantum-limited linewidths of small HeNe 3.39 μm and HeXe 3.51 μm lasers. In contrast to the expected Schawlow-Townes behaviour strong deviations from the inverse power dependence are observed, leading to a double-valued relation between the linewidth and the output power. This phenomenon is analyzed in terms of the increase of spontaneous emission, by a factor N_sp, due to incompleteness of the inversion. Our analysis shows that typically N_sp has a value ranging from 1-10. Combining existing models for the pump power dependence of the level populations with measurements of the small signal gain, we are able to explain the observed double-valued linewidth behaviour in a quantitative way     

Mine operating accurate stability control with optical fibersensing and Bragg grating technology: the European BRITE/EURAM STABILOSproject

Recent developments of stability control in mines, essentially based on Ge-doped fiber Bragg gratings (FBG) are reported including results about the different aspects of the system: accurate characterizations of FBG, sensor network topology and multiplexing method, user interface design and sensor packaging     

Theory for passive mode-locking in semiconductor laser structuresincluding the effects of self-phase modulation, dispersion, and pulsecollisions

We present a theory for passive mode-locking in semiconductor laser structures using a semiconductor laser amplifier and absorber. The mode-locking system is described in terms of the different elements in the semiconductor laser structure. We derive mode-locking conditions and show how other mode-locking parameters, like pulse width and pulse energy, are determined by the mode-locking system. System parameters, like bandwidth, dispersion, and self-phase modulation are shown to play an important role in mode-locking conditions and results. We also discuss the effects of pulse collisions and positions of the mode-locking elements inside the cavity on mode-locking stability and show that these effects can be easily included in the presented model. Finally, we give a number of design rules and recommendations for fabricating passively mode-locked lasers     

Lesbian mothers who conceived after donor insemination: a follow-up study

This study investigated the development of family relationships in lesbian families who conceived after donor insemination (DI). The main characteristics of this unknown family structure were analysed. An anonymous donor was used to conceive, the family unit consisted of two mothers and a father was non-existent, and both women had a homosexual orientation. A total of 50 lesbian couples who conceived after DI with children aged between 1 and 2 years participated in this study, using a standardized interview created for this study. After the birth of their child, 56% of the lesbian mothers (n = 100) would have wanted the identity of the donor to be registered, while 10% would have done so at the time of the insemination. Opinions differed in 12 of the 50 couples: the biological mother was in favour of identity registration while the social mother was not. Both women considered themselves a parent of the child with equally shared responsibilities. Mothers were open about the special features of their family structure with children and within their immediate social network. Only 30% disclosed their lesbian identity in a broader social environment. The features of these newly created families may influence the psychological development of the children and therefore make long-term follow-up studies indispensable.