Investigation of TE and TM polarised laser emission in GaInP/AlGaInP lasers by growth-controlled strain

GaInP/AlGaInP double heterostructure lasers can be obtained with either TE or TM polarised emission. In addition it it shown that, by using appropriate samples, TE or TM lasing can be selected by changing the temperature or the cavity length.<>     

Optoelectronic switch with low holding power

A double heterostructure NpnP optoelectronic switching device with low holding power has been fabricated. In the static regime a holding power of 20 nW for a device area of 200 mu m*100 mu m was obtained. This value represents a reduction of four orders of magnitude in holding power compared to previous reported PnpN or PnN structures with equivalent device area. A higher optical sensitivity and a lower optical switching intensity is consequently obtained with these devices.<>     

An optical IM/FSK coding technique for the implementation of a label-controlled arrayed waveguide packet router

In this paper, we present a new concept of optical packet/burst switching suitable for generalized multiprotocol label switched (GMPLS)-based optical networks. In such networks, optical labeled switched paths are being established in a similar way as label-switched paths in MPLS. We use a wavelength label as well as an orthogonally modulated label, with respect to the payload modulation format, and which is encoded using either frequency-shift keying (FSK) or differential phase-shift keying (DPSK). Wavelength is used for switching in the node, whereas the orthogonal label defines the label-switched path. We present both simulation and experimental results to assess transmission performance of the proposed combined modulation scheme. In addition, we propose a suitable optical node architecture that can take advantage of this stacked label concept. Toward this, we use widely tunable wavelength converters to efficiently route IM/FSK (or IM/DPSK) optically labeled packets in an arrayed-waveguide grating (AWG)-based node structure. We present performance simulation results in terms of packet loss ratio and internal block probability. Internal blocking is an inherent problem of AWG optical routers, and a specific wavelength assignment algorithm has been developed to minimize it. Finally, the feasibility of IM/FSK transmission is experimentally demonstrated over an 88-km single-mode fiber span, and novel aspects of FSK generation and detection techniques are presented.     

On properties of multicast routing trees

In the last several years we witnessed the proliferation of multimedia applications on the Internet. One of the unavoidable techniques to support this type of communication is multicasting. However, even a decade after its initial proposal, multicast is still not widely deployed. One of the reasons is the lack of a solid business model. If the gain and the cost of multicast could be predicted, network operators might be encouraged to deploy multicast on a larger scale. In this paper we propose analytical expressions that could be used to estimate the gain of network‐layer multicast. We show that the theoretical model matches extensive simulation and Internet measurement results remarkably well. Furthermore, we examine the reliability of traceroute data and of traceroutes‐based conclusions. We investigate the node degree distributions in the Internet maps obtained from CAIDA and RIPE and we show the divergency of our results with those obtained by other researchers. We further focus on the analysis of multicast trees based on traceroute data. Only few results have been available on the node degree distribution of multicast routing trees which provided contradictory conclusions. Our results seem to indicate that the node degrees follow power laws only for a large number of multicast users. Copyright © 2005 John Wiley & Sons, Ltd.     

Robust planar textile antenna for wireless body LANs operating in 2.45 GHz ISM band

A single-feed rectangular-ring textile antenna is proposed for wireless body area networks operating in the 2.45 GHz ISM band. The conductive parts of the planar antenna consist of FlecTron/spl reg/, whereas fleece fabric is used as non-conductive antenna substrate. This results in a highly efficient, flexible and wearable antenna to be integrated in garments. The robustness of the antenna characteristics with respect to bending is proven.     

On volume integral equations

The focus of this paper is on the volume integral representations to be used in constructing integral equations for composite volume media. The major thrust of the paper is to identify where derivatives of a discontinuous function arise in the derivation of the volume representation. Three different derivation methods are presented, resulting in identical representation independent of the derivation method. These representations agree with some in the existing literature and disagree with others. When an electric field formulation is considered, the source of disagreement manifests itself only when magnetic materials are present. Likewise, for the dual situation, the inconsistency appears for a magnetic field formulation of dielectric materials. This paper identifies the sources of error in the incorrect representations and its major contribution is the rigorously correct derivation of the representations to be used in volume integral equations. We also present numerical results for an integral equation derived from our representation. The numerical results employ only the E-field as the unknown and the singularity is handled in a manner analogous to a standard numerical treatment of the electric field integral equation.     

A Methodology for Architecture Exploration of Heterogeneous Signal Processing Systems

We present a methodology for the exploration of signal processing architectures at the system level. The methodology, named SPADE, provides a means to quickly build models of architectures at an abstract level, to easily map applications, modeled as Kahn Process Networks, onto these architecture models, and to analyze the performance of the resulting system by simulation. The methodology distinguishes between applications and architectures, and uses a trace-driven simulation technique for co-simulation of application models and architecture models. As a consequence, architecture models need not be functionally complete to be used for performance analysis while data dependent behavior is still handled correctly. We have used the methodology for the exploration of architectures and mappings of an MPEG-2 video decoder application.     

High resolution electrical characterisation of organic photovoltaic blends

In this work, electrostatic force microscopy (EFM) and conductive atomic force microscopy (C-AFM) are applied to perform high-resolution electrical characterisation of organic photovoltaic films. These films are composed of the C₆₀-derivative PCBM blended with hole conductive conjugated polymers PPV derivatives or P3HT. It is demonstrated that both EFM and C-AFM are able to electrically evidence phase separation in the blends, suggesting in addition higher density of carriers along interfaces. Correlation between the EFM contrast and the photovoltaic properties of the blends was observed. Local spectroscopy (I-V curves) completes the C-AFM investigations, analysing charge transport mechanisms in the P3HT:PCBM blend. Significant modifications of the local electrical properties of P3HT are shown to occur upon blending. Space charge limited current is evidenced in the blend and a hole mobility of 1.7 × 10⁻² cm² V⁻¹ s⁻¹ is determined for P3HT.     

Catalyst Design by NH4OH Treatment of USY Zeolite

Hierarchical zeolites are a class of superior catalysts which couples the intrinsic zeolitic properties to enhanced accessibility and intracrystalline mass transport to and from the active sites. The design of hierarchical USY (Ultra‐Stable Y) catalysts is achieved using a sustainable postsynthetic room temperature treatment with mildly alkaline NH₄OH (0.02 m ) solutions. Starting from a commercial dealuminated USY zeolite (Si/Al = 47), a hierarchical material is obtained by selective and tuneable creation of interconnected and accessible small mesopores (2–6 nm). In addition, the treatment immediately yields the NH₄⁺ form without the need for additional ion exchange. After NH₄OH modification, the crystal morphology is retained, whereas the microporosity and relative crystallinity are decreased. The gradual formation of dense amorphous phases throughout the crystal without significant framework atom leaching rationalizes the very high material yields (>90%). The superior catalytic performance of the developed hierarchical zeolites is demonstrated in the acid‐catalyzed isomerization of α‐pinene and the metal‐catalyzed conjugation of safflower oil. Significant improvements in activity and selectivity are attained, as well as a lowered susceptibility to deactivation. The catalytic performance is intimately related to the introduced mesopores, hence enhanced mass transport capacity, and the retained intrinsic zeolitic properties.     

Ultra-Low-Power Interface Chip for Autonomous Capacitive Sensor Systems

Traditionally, most of the sensor interfaces must be tailored towards a specific application. This approach results in a high recurrent design cost and time to market. On the other hand, generic sensor interface design reduces the costs and offers a handy solution for multisensor applications. This paper presents a generic sensor interface chip (GSIC), which can read out a broad range of capacitive sensors. It contains capacitance-to-voltage converters, a switched-capacitor amplifier, an analog-to-digital converter, oscillators, clock generation circuits and a reference circuit. The system combines a very low-power design with a smart energy management, which adapts the current consumption according to the accuracy and speed requirements of the application. The GSIC is used in a pressure and an acceleration monitoring system. The pressure monitoring system achieves a current drain of 2.3 muA for a 10-Hz sample frequency and an 8-bit accuracy. In the acceleration monitoring system, we measured a current of 3.3 muA for a sample frequency of 10 Hz and an accuracy of 9 bits