Phase-insensitive all-optical transistors based on second-ordernonlinearities

We demonstrate and compare two phase-insensitive all-optical transistors (AOT's) based on frequency-degenerate quadratic three-wave interactions. In particular, we demonstrate gain using KTP in a type II geometry. Both AOT's exploit the phase insensitivity inherent to three-wave parametric processes when only two fields are input, providing amplification of a small signal at the operating frequency via the interaction with a second-harmonic wave. The first scheme is based on successive up- and down-conversion (i.e., cascading) while the second relies on parametric down-conversion. We obtain gains of 5 and 160 in the two configurations, respectively, with a significant background and output coherent to the pump in the first case, no background and coherence between output and signal in the second     

Worldwide experience with the Finetech-Brindley sacral anterior root stimulator

BACKGROUND: Serum creatinine has been reported in previous studies to be a prognostic indicator for overall mortality, in particular in a hypertensive population. METHODS: The Program on the Surgical Control of the Hyperlipidemias (POSCH) was a randomized, controlled clinical trial. All patients had survived a single myocardial infarction, were normotensive, were not obese, were not having heart failure, and were free of diabetes mellitus and renal disease at entry into the study. POSCH had followed its control group patients (N = 417) for a minimum of 7.0 years. In this group, a prospective post hoc analysis of the relationship of baseline serum creatinine with subsequent overall and atherosclerotic coronary heart disease mortality was performed. RESULTS: The baseline serum creatinine values in the control group patients ranged from 0.7 to 1.9 mg/dL (60 to 170 mumol/L), and were found to be independent predictors (P < .01) of both overall mortality and atherosclerotic coronary heart disease mortality. Each 0.1 mg/dL (9 mumol/L) increment in the baseline serum creatinine increased the relative risk for subsequent overall mortality by 36% and the relative risk for subsequent atherosclerotic coronary heart disease mortality by 47%. CONCLUSIONS: These results demonstrate that a serum creatinine value, obtained in normotensive, nonobese, normoglycemic survivors of a myocardial infarction without preexistent renal disease or heart failure, provides independent prognostic information regarding subsequent overall and atherosclerotic coronary heart disease mortality.     

Ornithine-delta-aminotransferase expression and ornithine metabolism in cultured epidermal keratinocytes: toward metabolic sink therapy for gyrate atrophy

There is now strong evidence that the chorioretinal degeneration associated with ornithine-delta-aminotransferase (OAT) deficiency is a consequence of hyperornithinemia. Therefore development of a metabolic system for clearing ornithine from the circulation is being pursued as a potential treatment. The skin is considered an attractive location for such a metabolic system because autologous cells can be safely and easily utilized. This study was undertaken to determine the ornithine metabolizing capacity of epidermal keratinocytes expressing normal and superphysiologic amounts of OAT. The data show that overexpression of OAT in keratinocytes cultured from a gyrate atrophy patient restores ornithine metabolism and results in a rate of ornithine disappearance from the medium that is significantly higher than the rate of disappearance from the medium bathing normal keratinocytes. In addition, OAT activity determined in soluble protein prepared from sonicates suggests that the capacity to maintain plasma ornithine within the normal range is contained within an accomplishable graft of keratinocytes overexpressing OAT. However, the actual rate of ornithine disappearance from the media was significantly less than predicted from enzyme activity assays. Following ornithine metabolite production by intact cells suggests that ornithine metabolism is limited primarily by clearance of downstream metabolites, as opposed to substrate delivery.     

Micro-electro-discharge machining as microsensor fabrication technology

This paper presents the design and fabrication of three miniaturized mechanical sensors to demonstrate the three-dimensional machining capabilities of micro-electro-discharge machining (EDM). The first sensor is an inertial bi-axial inclination sensor. The displacement of an inertial mass is measured optically by means of a two-dimensional position sensitive device (PSD). The machining freedom of micro-EDM makes it possible to produce both sensor and housing in one monolithic structure. The second sensor is an inertial uni-axial inclination sensor, which demonstrates the compatibility of the micro-EDM technology with the conventional photolithographic micromachining technologies. The mechanical structure of the sensor is machined by micro-EDM and the capacitive sensing part is produced by lithography. The aim of the integration is to set up a hybrid technology, which inherits the benefits of both micro-EDM and photolithography. The third miniaturized sensor is a three-component force sensor. The mechanical structure of the force sensor converts forces into displacements, which are measured optically. The mechanical structure of the force sensor is produced by wire-EDM and micro-EDM.     

Calcification of subcutaneously implanted collagens in relation to cytotoxicity,cellular interactions and crosslinking

In general, calcification of biomaterials occurs through an interaction of host and implanted material factors, but up to now the real origin of pathologic calcification is unknown. In this study we aimed to investigate incidence of calcification of (crosslinked) dermal sheep collagens (DSCs) with respect to their specific properties, during subcutaneous implantation in rats. Three types of DSCs were commercially obtained: non-crosslinked DSC (NDSC), and DSC crosslinked with glutaraldehyde (GDSC) and hexamethylenediisocyanate (HDSC). NDSC, HDSC and GDSC were (enzymatically) tissue culture pretreated to eliminate their cytotoxic products. Beside this, crosslinking methods were modified to optimize mechanical properties and to decrease cytotoxicity, which resulted in HDSC^* and GDSC^*. Furthermore, DSC was crosslinked by activation of the carboxylic groups, i.e. by means of acyl azide and carbodiimide, resulting in AaDSC and CDSC, respectively. After implantation of HDSCs and GDSCs a relation between cytotoxicity and calcification of crosslinked DSC could be made. No relation was found between cellular infiltration of DSCs and calcification. However, from the use of different types and modification of crosslinking methods it might be concluded that calcification is mainly related to stable crosslinks, i.e. to the chemical properties of the obtained material.     

Interaction of protein percent with caloric density and protein source for lactating cows

Experiment 1 was to test effect of three ratios of energy to protein in complete mixed diets for 36 lactating cows in three, 28-d periods. Energy was varied with cottonseed hulls, pelleted ground corrugated boxes, and a mixture of the two. Crude protein was varied with soybean meal to give energy:crude protein of 5.7, 5.0, and 4.6 for each energy amount. Cottonseed meal was compared with soybean meal in corrugated box diets. Feed intake was much higher with cottonseed hulls, and appreciable feedlot bloat resulted from pelleted ground corrugated box diets. Data adjusted to equal feed intake showed significant effect of energy to crude protein ratio on milk yield and improved digestion of organic matter with soybean meal vs. cottonseed meal. Experiment 2 tested the hypothesis that lactating cows consuming high-protein alfalfa may benefit from supplemental protein. Diets were 50% forage. Six diets were 14 or 18% crude protein in three ratios of alfalfa hay to corn silage (0:100, 50:50, 100:0). Additional corn silage diets were to compare: 14 versus 18% protein from distiller's dried grains with solubles only and with .5 or .9% urea (four diets); two 14% protein diets compared .6% added potassium chloride with or without .5% urea. Thirty-six Holstein cows in early lactation received one of the 12 diets in each of three 28-d periods. Distiller's grains with solubles markedly depressed milk yield (2.2 kg/d) and milk protein (.22%); heat damage of distiller's grains was evident. Protein interacted with alfalfa so gain in milk from 18 versus 14% increased from .55 to 1.36 to 2.66 kg/d as alfalfa changed from 0 to 50 to 100%. Thus, crude protein of alfalfa was not as effective as that from soybean meal in supporting milk yield.     

The forward muon detector of the DELPHI experiment at LEP

The layout and construction of the muon drift chambers equipping the end caps of the DELPHI detector are described. The performance of this forward muon detection system, determined from cosmic ray tests and data collected during the first year of LEP operation, is presented.     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.