Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts

Commercially available graphitized carbon nanofibers and multi-walled carbon nanotubes, two carbon materials with very different structure, have been functionalized in a nitric–sulfuric acid mixture. Further on, the materials have been platinized by a microwave assisted polyol method. The relative degree of graphitization has been estimated by means of Raman spectroscopy and X-ray diffraction while the relative concentration of oxygen containing groups has been estimated by X-ray photoelectron spectroscopy, which resulted in a graphitic character trend: Pt/GNF > Pt/F-GNF ? Pt/MWCNT > Pt/F-MWCNT. Transmission electron microscopy showed that the Pt particle size is around 3 nm for all samples, which was similar to the crystallite size obtained by X-ray diffraction. The activity towards electrochemical reduction of oxygen has been quantified using the thin-film rotating disk electrode, which has shown that all the samples have a better activity than the commercially available electrocatalysts. The trend obtained for the graphitic character maintained for the electrochemical activity, while the reverse trend has been obtained for the accelerated ageing test. Long-term potential cycling has demonstrated that the functionalization improves the stability for multi-walled carbon nanotubes, at the cost of decreased activity.     

Renewable polybenzoxazines based in diphenolic acid

The reaction of mixtures of renewable diphenolic acid (DPA) and its methylesterbenzoxazine derivative (MDP-Bz) has been studied. The DPA was introduced to lower the high temperature needed to complete the curing of the pure benzoxazine. In this way, samples with different DPA/MDP-Bz ratio (0, 2, 5, 10 and 25% of DPA) were investigated. Moreover, high performance flame retardant thermosetting resins with phosphorus were prepared through the mixture of MDP-Bz and a DPA-phosphazene derivative (DPA-PPZ). The curing behavior of these materials was studied by differential scanning calorimetry (DSC). Finally, the properties of the materials were evaluated by termogravimetric analysis (TGA), dynamic mechanical analysis (DMTA), tensile measurements, limiting oxygen index (LOI) and UL-94 Burn Test.     

Optimization of the silane treatment of cellulosic fibers from eucalyptus wood using response surface methodology

Viscose cellulosic fibers from eucalyptus wood were treated with organosilanes to introduce specific functionalities on the fibers and enhance their wettability and adhesion with phenolic matrices in composites. Modeling procedures were employed to optimize the conditions of the treatments of the fibers with the silanes (3‐aminopropyl) trimethoxysilane (APS) and 3‐(2‐aminoethylamino) propyltrimethoxysilane (AAPS). The analyzed responses were relative intensities of the bands 1565/897 and 1120/897 cm⁻¹, measured by Fourier transform infrared spectroscopy, and the silicon amount incorporated into the cellulosic fibers, which was determined by energy dispersive X‐ray analysis. In addition, surface morphology of the silane treated fibers was observed using scanning electron microscopy. The treatments of the cellulosic fibers with 2.2% APS for 120 min and 1.5% AAPS for 100 min were selected as optimums. According to contact angle measurements, both treatments enhanced the wettability between the fibers and a resol‐type phenolic resin, revealing the possible use of the silane treated fibers as reinforcement in phenolic composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42157.     

The potential to retrofit sustainable drainage systems to address combined sewer overflow discharges in the Thames Tideway catchment

Experience of retrofitting sustainable drainage systems (SuDS) in the United Kingdom is limited, and there are no well‐established procedures for evaluating the feasibility, value or cost‐effectiveness of doing this, particularly at the catchment scale. This paper demonstrates a two‐phase process for evaluating the potential to retrofit SuDS to address combined sewer discharges in three subcatchments within the Thames Tideway catchment of London. The first phase evaluates what might be achieved with various levels of disconnection (‘global’ disconnection scenarios) using hydraulic models, while the second phase considers how disconnection might practically be achieved. High levels of disconnection are technically possible but practicably difficult. In selected cases, and with aggressive implementation of SuDS, combined sewer overflow CSO discharges could potentially be eliminated or reduced to acceptable levels without the need for any modifications to underground assets. However, retrofit SuDS could not eliminate the requirement for some form of sewer modification in any subcatchments.     

Analysis of Water-Soluble Vitamins in Honey by Isocratic RP-HPLC

An isocratic RP-HPLC method has been developed for the identification and quantification of water-soluble vitamins in honey. The mobile phase tested was an aqueous solution of sulphuric acid and the detection was carried out simultaneously by UV and fluorescence. The separation of vitamins C (l-ascorbic acid), B₁ (thiamine), B₃N (nicotinamide), B₃H (nicotinic acid), B₅ (d-pantothenic acid) and B₆ (pyridoxine) is achieved in these conditions in 15 min. The addition to the mobile phase of methanol 2 %?v/v reduced significantly the analysis time in the separation of these vitamins up to 10 min. Moreover, in presence of a cationic surfactant hexadecyltrimethylammonium bromide (CTAB) in the mobile phase, the separation of vitamin C, B₁, B₃N, B₃H, B₂ (riboflavin) and B₆ is possible in 6 min. The combination of both mobile phases, H₂SO₄/methanol and H₂SO₄/methanol/CTAB, has been applied to the analysis, in isocratic mode, of several monofloral honeys (rosemary, thyme, lavender, chestnut, echium) and a honeydew honey in a short time analysis.     

Hazard analysis and critical control point of frying – safety assurance of fried foods

Deep frying can pose hazards due to oil deterioration (oxidation, polymerization, hydrolysis) and harmful components formation such as trans fatty acids, highly oxidized or polymerized constituents of fatty acids and acrylamide. An analysis of safety hazards of the production of the potato chips and french fries, was carried out from potato harvesting until final products packaging according to hazard analysis and critical control point approach focusing mainly on the first three principles. Since frying is considered a critical control point, the critical limits for the frying temperature and for the potential hazards must be controlled in order to ensure fried products safety.     

Clay Bodies: Crafting the Future with 3D Printing

People have been using clay to make objects and shelters since time immemorial; but could it also be a key material of the future? San Francisco-based xyqmake-tank’ Emerging Objects has been experimenting with the use of clay in 3D printing, with sophisticated codes producing woven and textured forms and mixing different clays together. The studio's cofounders Ronald Rael and Virginia San Fratello here present these projects, as well as offering a potted history of clay's use and nature. Given its re-resistance and thermal qualities, the benefits of eventually applying such techniques on an architectural scale are clear.     

NMR Profiling of Exhaled Breath Condensate Defines Different Metabolic Phenotypes of Non-Cystic Fibrosis Bronchiectasis

Nuclear-magnetic-resonance (NMR) profiling of exhaled breath condensate (EBC) provides insights into the pathophysiology of bronchiectasis by identifying specific biomarkers. We evaluated whether NMR-based metabolomics discriminates the EBC-derived metabolic phenotypes (“metabotypes”) of 41 patients with non-cystic fibrosis (nCF) bronchiectasis of various etiology [24 subjects with Primary Ciliary Dyskinesia (PCD); 17 patients with bronchiectasis not associated with PCD (nCF/nPCD)], who were compared to 17 healthy subjects (HS). NMR was used for EBC profiling, and Orthogonal Projections to Latent Structures with partial least-squares discriminant analysis (OPLS-DA) was used as a classifier. The results were validated by using the EBC from 17 PCD patients not included in the primary analysis. Different statistical models were built, which compared nCF/nPCD and HS, PCD and HS, all classes (nCF/nPCD-PCD-HS), and, finally, PCD and nCF/nPCD. In the PCD-nCF/nPCD model, four statistically significant metabolites were able to discriminate between the two groups, with only a minor reduction of the quality parameters. In particular, for nCF/nPCD, acetone/acetoin and methanol increased by 21% and 18%, respectively. In PCD patients, ethanol and lactate increased by 25% and 28%, respectively. They are all related to lung inflammation as methanol is found in the exhaled breath of lung cancer patients, acetone/acetoin produce toxic ROS that damage lung tissue in CF, and lactate is observed in acute inflammation. Interestingly, a high concentration of ethanol hampers cilia beating and can be associated with the genetic defect of PCD. Model validation with 17 PCD samples not included in the primary analysis correctly predicted all samples. Our results indicate that NMR of EBC discriminates nCF/nPCD and PCD bronchiectasis patients from HS, and patients with nCF/nPCD from those with PCD. The metabolites responsible for between-group separation identified specific metabotypes, which characterize bronchiectasis of a different etiology.     

Effect of processing for saponin removal on fungal contamination of quinoa seeds (Chenopodium quinoa Willd.)

Incidence of fungal contamination of quinoa seeds from three locations (Salar de Uyuni, Bolivia; Salta and Tucumán provinces, Argentina) was analyzed in samples with and without treatment to remove saponins (wet method). In processed samples, the percentage of infection was reduced. Distribution of the different fungal genera was not homogeneous in the three locations (p<0.05), although Penicillium and Aspergillus were the most prevalent contaminants, regardless the geographic origin of the samples. Other genera, such as Eurotium, Fusarium, Phoma, Ulocladium, Mucor and Rhizopus were less frequently isolated. Absidia, Alternaria, Cladosporium, Dreschlera, Epicoccum and Monascus were sporadically encountered. Significant differences (p<0.05) in the distribution of fungal genera in samples with and without saponins from each location were observed. In all cases, processing caused a decrease of Aspergillus incidence, while increased the proportion of Penicillium, Eurotium, Mucor and Rhizopus indicating that these genera were part of the internal mycota. A. flavus and A. niger were the dominating species of genus Aspergillus. A similar pattern of prevalent Penicillium species was observed in samples with and without saponins, since P. aurantiogriseum, P.chrysogenum, P. citrinum and P. crustosum were always present in high number, although their relative density was variable according to the geographic origin of samples. Mycotoxin-producing ability of most representative species was also determined. Toxigenic strains of A. flavus (aflatoxins and cyclopiazonic acid), A. parasiticus (aflatoxins), P. citrinum (citrinin) and P. griseofulvum (cyclopiazonic acid) were found. None of the A. niger isolates was ochratoxin A producer. The above mentioned mycotoxins were not detected in the samples analyzed.