超高分子量聚乙烯的辐照效应

通过密度测定和ＤＳＣ热分析，观测了超高分子量聚乙烯的辐射效应。实验结果表明：在吸收剂量０—１．１３ＭＧｙ范围内，密度随吸收剂量的增加而增大，熔化热和熔点也有所增加，特别是在低剂量范围内增加十分明显。以上结果都说明，超高分子量聚乙烯在辐照过程中，结晶在完善或有新的结晶形成     

Evaluating the impact of CASE: an empirical comparison of retrospective and cross-sectional survey approaches

The purpose of this paper is to evaluate two methods of assessing the productivity and quality impact of Computer Aided Software Engineering (CASE) and Fourth Generation Language (4GL) technologies: (1) by the retrospective method; and (2) the cross-sectional method. Both methods involve the use of questionnaire surveys. Developers' perceptions depend on the context in which they are expressed and this includes expectations about the effectiveness of a given software product. Consequently, it is generally not reliable to base inferences about the relative merits of CASE and 4GLs on a cross-sectional comparison of two separate samples of users. The retrospective method that requires each respondent to directly compare different products is shown to be more reliable. However, there may be scope to employ cross-sectional comparisons of the findings from different samples where both sets of respondents use the same reference point for their judgements, and where numerical rather than verbal rating scales are used to measure perceptions.     

Performance evaluation of rule grouping on a real-time expertsystem architecture

Uses a Markov process to model a real-time expert system architecture characterized by message passing and event-driven scheduling. The model is applied to the performance evaluation of rule grouping for real-time expert systems running on this architecture. An optimizing algorithm based on Kernighan-Lin heuristic graph partitioning for the real-time architecture is developed and a demonstration system based on the model and algorithm has been developed and tested on a portion of the advanced GPS receiver (AGR) and manned manoeuvring unit (MMU) knowledge bases     

一种自动布线方法：多级线探索法

本文介绍了一种在微机上实现的印制板自动布线方法──多级线探索法及其编程方法。这种方法是基于完备布线算法的概念，通过分析李氏算法和传统线探索法的不足之处而得到的。虽然它也是一种线探索法，但有较传统线探索法更强的探索能力，不需要结合李氏算法而能单独完成布线任务，是一种较理想的算法，通过实验获得了较为满意的效果。     

Fuzzy controller design by using neural network techniques

This paper investigates the relationship between the piecewise linear fuzzy controller (PLFC), in which the membership functions for fuzzy variables and the associated inference rules are all in piecewise linear forms, and a Gaussian potential function network based controller (GPFNC), in which the network output is a weighted summation of hidden responses from a series of Gaussian potential function units (GPFU's). Systematic procedures are proposed for transformation from a PLFC to its GPFNC counterpart, and vice versa. Based on these transformation principles, a series of systematic and feasible steps is presented for the design of an optimized PLFC (PLFC*) by using neural network techniques. In the design procedures, the simplified PLFC is used as the initial controller structure, then a GPFNC, which gives the approximate control response to the initially given PLFC, is found for further optimization. A neutralization process is used to demonstrate the feasibility and the potential applicability of these intelligent controllers on the regulation of highly nonlinear chemical processes     

无机高分子絮凝剂聚硫酸铁合成条件的研究

实验研究了以工业硫酸亚铁及废硫酸为原料,分别采用NaClo_3、KClO_3、H_2O_2及(o_2+NaNO_2)为氧化剂成聚硫酸铁的条件。在以(O_2+NaNO_2)为氧化剂的合成过程中,发现添加微量助催化剂(型号为HG-1、HG-2和HG-3),对提高合成速度及反应过程的稳定性具有重大作用。     

Poly(3-octylthiophene) as semiconductor for schottky barrier: Effects of doping and storage time

Schottky diodes of aluminium/poly(3-octylthiophene)(P30T)/indium-tin oxide with large active area are prepared by using the proposed new casting technique. Their rectifying behavior and junction characteristics are dependent on whether the P30T is doped and on the storage time, but independent of the thickness of the P30T layer. The present technique can also be applied in a fabrication of electronic devices with other soluble conjugated polymers.     

隧道挖掘中采用补偿灌浆的实例

在英国伦敦多克兰斯轻便铁路刘易舍姆延长线（DLR－LWE）双隧道掘进工程中，在敏感建筑物下进行了补偿灌浆，以防止隧道开挖引起的过度沉降。但是，过度灌浆也会对隧道下部施加超越。介绍了由隧道掘进承包商所编辑的关于地面和建筑物沉降以及由补偿灌浆引起的隧道衬砌变形的详细现场监测数据。