Impact of preanneal process on threshold voltage of MOS transistors for trench DRAM

As the first step of DRAM manufacture, preanneal process plays an important role in determining the threshold voltage variation. It is found that the higher trans-1,2-dichloroethene flow in pad oxide growth and the higher nitrogen flow in high-temperature annealing step would respectively engender a lower boron segregation coefficient and higher nitridation of the oxide, both modify the boron distribution in the substrate and consequently the behavior of the threshold voltage. As the feature size of DRAM devices enter nanometer regime, besides gate oxidation, ion implantation and related thermal processes, the impact of preanneal process condition should be prudentially taken into consideration for rigorous control of the threshold voltage in the advanced DRAM production.     

In situ crosslinking of hyperbranched polyglycerol in casting solutions and its effect on the structure and properties of porous PVDF membranes

Porous membranes were prepared via phase inversion process from casting solutions composed of poly(vinylidene fluoride), hyperbranched polyglycerol (HPG), and N,N‐dimethylacetamide. To seek a stable presence of HPG in the resulting membranes, it was crosslinked in the casting solutions using 4,4′‐oxydiphthalic anhydride as the crosslinking agent. The membranes were characterized in terms of morphology, surface and bulk chemical compositions, water contact angle, porosity, water flux, and bovine serum albumin (BSA) adsorption experiments. The effects of HPG content and crosslinking degree on the membrane structure and properties were investigated. The increasing of crosslinking degree resulted in a significant improvement in HPG stability in the membrane matrix, and a remarkable enrichment of the crosslinked HPG at the separation surface was observed when the membrane was shaken in water at a relatively high temperature (60°C). This enrichment led to a decrease in the value of water contact angle and an improvement in fouling‐resistance. To optimize the membrane performance, a small amount of poly(vinylpyrrolidone) (PVP) was used as an additive, and it was found that the addition of PVP led to a considerable increase in water flux. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Processing and properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 thick films

We have investigated the processing of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) thick films on platinised alumina substrates. Nanosized PMN–PT powder with 2 mol% of excess PbO was prepared by high-energy milling and deposited on the substrate using screen-printing technology. The films were then sintered at 950 °C in a PbO-rich atmosphere. The influence of the sintering time and the amount of PbO-containing packing powder was studied and related to the structural, microstructural, dielectric and piezoelectric properties of the film. In order to obtain a homogeneous and dense thick film without any secondary phase, the PMN–PT films had to be sintered in the presence of a PbO-based liquid phase that had to be completely removed from the thick film during the final stage of the sintering. Under optimal sintering conditions we obtained a room temperature relative dielectric permittivity of 3600, dielectric losses of 0.036, a T_m of 174 °C, a permittivity at the T_m of 21,000 and a d₃₃ of 140 pC/N.     

Synthesis and characterization of La2Ti2O7 employed for photocatalytic degradation of reactive red 22 dyestuff in aqueous solution

Perovskite structured La₂Ti₂O₇ catalyst prepared by polymerized complex method was characterized and examined the photocatalytic activity by decomposing an azo dyestuff, Reactive Red 22, in aqueous solutions under UV irradiation. La₂Ti₂O₇ powders prepared by polymerized complex method exhibit higher surface areas, better homogeneity and are more sensitive to solution than those prepared by solid-state method. The first derivatives of UV–vis DRS patterns confirmed the complete crystallization of La₂Ti₂O₇ sintered at temperatures higher than 900 °C. The effects of sintering temperature of catalyst and solution pH of photocatalytic reaction were studied. The photocatalytic decomposition of Reactive Red 22 per unit surface area was found to be higher for experiments using La₂Ti₂O₇ than using TiO₂. However, the electron–hole recombination was found to be more obvious for La₂Ti₂O₇ than for TiO₂ because the network of metal cations constructed within La₂Ti₂O₇ enhances the mobility of photogenerated electrons and holes.     

Relation between Electrical Mobility,Mass, and Size for Nanodrops 1–6.5 nm in Diameter in Air

A large number of data on mobility and mass have been newly obtained or reanalyzed for clusters of a diversity of materials, with the aim of determining the relation between electrical mobility (Z) and mass diameter d _m = (6m/ π ρ ) ^1/3 (m is the particle mass and ρ the bulk density of the material forming the cluster) for nanoparticles with d _m ranging from 1 nm to 6.5 nm. The clusters were generated by electrospraying solutions of ionic liquids, tetra-alkyl ammonium salts, cyclodextrin, bradykinin, etc., in acetonitrile, ethanol, water, or formamide. Their electrical mobilities Z in air were measured directly by a differential mobility analyzer (DMA) of high resolution. Their masses m were determined either directly via mass spectrometry, or assigned indirectly by first distinguishing singly (z = 1) and doubly (z = 2) charged clusters, and then identifying monomers, dimers, … n-mers, etc., from their ordering in the mobility spectrum. Provided that d _m > 1.3 nm, data of the form d _m vs. [z(1+m _g /m) ^1/2 /Z)] ^1/2 fall in a single curve for nanodrops of ionic liquids (ILs) for which ρ is known (m _g is the mass of the molecules of suspending gas). Using an effective particle diameter d _p = d _m + d _g and a gas molecule diameter d _g = 0.300 nm, this curve is also in excellent agreement with the Stokes-Millikan law for spheres. Particles of solid materials fit similarly well the same Stokes-Millikan law when their (unknown) bulk density is assigned appropriately.     

Ultrasound-modulated optical tomography of biological tissue by use of contrast of laser speckles

Ultrasound-modulated optical tomography based on the measurement of laser-speckle contrast was investigated. An ultrasonic beam was focused into a biological-tissue sample to modulate the laser light passing through the ultrasonic column inside the tissue. The contrast of the speckle pattern formed by the transmitted light was found to depend on the ultrasonic modulation and could be used for imaging. Variation in the speckle contrast reflected optical inhomogeneity in the tissue. With this technique, two-dimensional images of biological-tissue samples of as much as 25 mm thick were successfully obtained with a low-power laser. The technique was experimentally compared with speckle-contrast-based, purely optical imaging and with parallel-detection imaging techniques, and the advantages over each were demonstrated.     

Starting low but ending high: A reversal of the anchoring effect in auctions.

Counter to the "start high, end high" effect of anchors in individual judgments and dyadic negotiations, 6 studies using a diverse set of methodologies document how and why, in the social setting of auctions, lower starting prices result in higher final prices. Three processes contribute to this effect. First, lower starting prices reduce barriers to entry, which increase traffic and generate higher final prices. Second, lower starting prices entice bidders to invest time and energy (creating sunk costs) and, consequently, escalate their commitments. Third, the traffic generated by lower starting prices can lead bidders to infer value in the item, thereby explaining previous findings that traffic begets more traffic. The authors show that barriers to entry that limit traffic (e.g., a misspelled brand name) lead to anchoring's normal assimilative effect rather than its reversal. By broadening the understanding of anchors to extended social interactions and open markets, the authors identify when and why starting prices anchor. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

粒子群优化算法的发展与展望

对粒子群优化算法的产生背景、基本算法、改进算法、研究热点及应用领域作了简要的综述,并对其发展方向作了展望。     

Ozonation of 2-Chlorophenol in Aqueous Solutions with a Packed Contactor

The dissolution of ozone and the decomposition of 2-chlorophenol were noticeably enhanced for experiments conducted in the fixed packed contactor than those conducted in a bubble column. The rate of ozone transfer was increased with the increasing amount of Pall rings contained in the packed contactor and the decreasing gas/liquid ratio (G/L) because the gas–liquid interface may be renewed effectively. The decomposition of 2-chlorophenol by ozonation was found to be faster for experiments conducted in alkaline solutions while the decomposition of total organic carbon only slightly enhanced. However, the decomposition of total organic carbon only slightly increased for experiments conducted in alkaline solutions.