Parathion degradation and toxicity reduction in solar photocatalysis and photolysis.

The solar photocatalytic degradation of methyl parathion was investigated using a circulating TiO2/solar light reactor. Under solar photocatalysis condition, parathion was more effectively degraded than solar photolysis and TiO2-only conditions. With solar photocatalysis, 20 mg/L of parathion was completely degraded within 60 min with a TOC decrease of 63% after 150 min. The main ionic byproducts during photocatalysis recovered from parathion degradation were mainly as NO3-, NO2- and NH4+, 80% of the sulphur as SO4(2-), and 5% of phosphorus as PO4(3-). The organic intermediates 4-nitrophenol and methyl paraoxon were also identified, and these were further degraded in solar photocatalytic condition. Two different bioassays (Vibrio fischeri and Daphnia magna) were used to test the acute toxicity of solutions treated by solar photocatalysis and photolysis. The Microtox test using V. fischeri showed that the toxicity expressed as EC50 (%) value increased from 5.5% to >82% in solar photocatalysis, indicating that the treated solution is non-toxic, but only increased from 4.9 to 20.5% after 150 min in solar photolysis. The acute toxicity test using D. magna showed that EC50 (%) increased from 0.05 to 1.08% under solar photocatalysis, but only increased to 0.12% after 150 min with solar photolysis, indicating the solution is still toxic. The pattern of toxicity reduction parallels the decrease in TOC and the parathion concentrations.     

Effects of tube rupture modeling and the parameters on the analysis of multiple steam generator tube rupture event progression in APR1400

A multiple steam generator tube rupture (MSGTR) event in APR1400 has been investigated using the best estimate thermal hydraulic system code, MARS1.4. The effects of the parameters such as the number of ruptured tubes, rupture location, affected steam generator on the analysis of the MSGTR event in APR1400 are examined. In particular, tube rupture modeling methods, single tube modeling (STM) and double tube modeling (DTM), are compared. The APR1400 is found to have the capability of allowing more than 30 min to operators for the MSGTR event of five tubes. The effects of rupture location on the MSSV lift time is not significant in the case of STM, but the MSSV lift time for tube-top rupture is found to be 25.3% larger than that for rupture at the hot-leg side tube sheet in the case of DTM. The MSSV lift time for the cases that both steam generators are affected (4C5x, 4C23x) are found to be larger than that of the single steam generator cases (4A5x, 4B5x) due to a bifurcation of the primary leak flow. The discharge coefficient of Cd is found to affect the MSSV lift time only for a smaller value of 0.5. It is found that the most dominant parameter governing the MSSV lift time is the leak flow rate. Whether any modeling method is used, it gives the similar MSSV lift time if the leak flow rate is close, except in the case where both steam generators are affected. Therefore, the system performance and the MSSV lift time of the APR1400 are strongly dependent on the break flow model used in the best estimate system code.     

Synthesis and comparative molecular field analysis (CoMFA) of antitumor 3-arylisoquinoline derivatives

In this study a series of 3-arylisoquinoline derivatives were synthesized and cytotoxicity against human melanoma tumor cell evaluated, and a three dimensional quantitative structure-activity relationship was investigated using the comparative molecular field analysis (CoMFA). The results suggested that the electrostatic, steric and hydrophobic factors of 3-arylisoquinolines were strongly correlated with the antitumor activity. Considerable predictive ability (cross-validated r2 as high as 0.721) was obtained through CoMFA.     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Effect of temperature on polymer migration II: Concentration equation

Polymer migration is a generally well-known phenomenon in a flow field, and it has been verified that the sources of such phenomena are nonhomogeneity of the flow, concentration effects and hydrodynamic interactions between the polymer molecules. In addition, temperature effects were found to be another source of polymer migration. The Langevin equation for a polymer molecule was first derived from single chain dynamics using a kinetic theory for the bead-spring elastic harmonic dumbbell model, as described in part I (reference [1]). In this paper the diffusion equation and concentration profile of the polymer molecules induced by a temperature gradient are obtained from the Fokker-Planck equation. A new differential operator is also introduced to calculate the concentration profile. From the concentration equation obtained in the general flow geometry, we find that in dilute polymer solution there are significant effects on the polymer migration not only due to the nonhomogeneity of the flow field but also due to temperature gradients.     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

Analysis of deformation processes in glassy polycarbonate using internal friction measurements during a tensile test

Internal friction has been measured by torsion at 1 Hz during tensile tests performed on glassy polycarbonate at room-temperature. Steady-state flow and transient effects have been studied during continuous tensile tests and strain-rate changes. During steady-state, internal friction and flow-stress vary in a similar way with strain-rate. But during transients, internal friction varies continuously while flow-stress passes through a maximum (or a minimum). These results are interpreted assuming that non-elastic deformation of glassy polymers requires some microscopic discontinuous processes such as motion of defects. Two parameters are considered: the velocity v and the density ρ of mobile defects. Assuming that the former is directly related to the flow stress, it has been shown that internal friction is related to the density of mobile defects ρ. This feature is used to interpret the different stages of a tensile test curve. Activation volumes for both velocity and density of mobile defects are calculated from experimental data.     

Interaction of CETP inhibitory peptide and lipoprotein substrates in cholesteryl ester transfer assay: relationship between association properties and inhibitory activities

In a previous study, CETP inhibitory peptide (3 kDa) was isolated from hog plasma. The peptide, synthesized chemically according to the amino acid sequence of the 3-kDa peptide (designated P₂₈), showed CETP inhibitory activity both in vitro and in vivo [Cho et al. (1998) Biochim. Biophys. Acta 1391, 133–144]. We report herein further unique features of P₂₈ when it was associated with the cholesteryl ester (CE)-donor and-acceptor lipoproteins. Lipoprotein substrates with P₂₈ present in both HDL (as a CE-donor) and LDL (as a CE-acceptor) served as poor substrates, with CE-transfer activity decreased up to 60% compared to normal substrates without P₂₈. P₂₈ was found to be located in HDL fractions of hog plasma and showed the same electromobility as that visualized by PAGE on 7% polyacrylamide gel under nondenaturing conditions. Addition of apolipoprotein A-1 (apoA-1) or apoB antibody to a normal CE-transfer mixture did not alter CE-transfer activity. However, addition of apoA-1 or −B antibody to a CETP-inhibition mixture decreased the inhibitory activity of P₂₈ by ca. 20%. Western blot analysis revealed that P₂₈ was associated only with human and hog HDL among several lipoproteins purified from human, hog, and rabbit. CFTP-inhibition assays with various lipoprotein substrates revealed that P₂₈ exhibited substrate-specific inhibitory activity. The inhibitory activity of P₂₈ was highly dependent on the type of lipoprotein substrate (whether CE-donor or-acceptor); P₂₈ inhibited CE transfer from HDL to LDL, but it did not inhibit CE transfer from HDL to HDL.     

The onset of Taylor-Görtler vortices in impulsively decelerating swirl flow

The onset of hydrodynamical instability induced by impulsive spin-down to rest in a cylinder containing a Newtonian fluid is analyzed by using propagation theory. It is well-known that the primary transient swirl flow is laminar, but with initial high velocities secondary motion sets in at a certain time. The dimensionless critical time Τ_c to mark the onset of instability is presented here as a function of the Reynolds number Re. Available experimental data indicate that for large Re deviation of the velocity profiles from their momentum diffusion occurs starting from a certain time Τ≈4Τ_c. This means that secondary motion is detected at this characteristic time. It seems evident that during Τ_c⪯Τ⪯4Τ_c, secondary motion is relatively very weak and the primary diffusive momentum transfer is dominant.     

Transient behaviour of encapsulated enzyme reactor systems

Mathematical models are developed for the transient behaviour of encapsulated enzyme reactor systems such as the continuous stirred tank reactor (CSTR) and the packed bed tubular reactor. The rate processes taking place in the encapsulated enzyme bed are approximated by using a combined rate control model of enzyme reaction and membrane diffusion. The change in transient substrate concentration is obtained by using the developed rate expression in the material balance over the substrate as a function of time for the CSTR and as a function of time and position for the packed bed tubular reactor. The effects of various parameters such as the enzymic reaction rate constant, Michaelis constant, diffusional resistance of membranes, and Peclet number on the substrate concentration distribution, which varies with respect to operating time, are investigated. This study affords insight into the transient operating characteristics of the encapsulated enzyme reactor system. The results should be useful in understanding the start-up performance of the reactor systems and to control such reactor systems at desired operating conditions.