Effect of surfactants and liquid hydrocarbons on gas hydrate formation rate and storage capacity

Hydrate formation rate plays an important role in making hydrates for the storage and transport of natural gas. Micellar surfactant solutions were found to increase gas hydrate formation rate and storage capacity. With the presence of surfactant, hydrate could form quickly in a quiescent system and the energy costs of hydrate formation reduced. Surfactants (an anionic surfactant, a non‐ionic surfactant and their mixtures) and liquid hydrocarbons (cyclopentane and methylcyclohexane) were used to improve hydrate formation. The experiments of hydrate formation were carried out in the pressure range 3.69–6.82 MPa and the temperature range 274.05–277.55 K. The experimental pressures were kept constant during hydrate formation in each experimental run. The effect of anionic surfactant (sodium dodecyl sulphate (SDS)) on natural gas storage in hydrates is more pronounced compared to a non‐ionic surfactant (dodecyl polysaccharide glycoside (DPG)). The induction time of hydrate formation was reduced with the presence of cyclopentane (CP). Cyclopentane and methylcyclohexane (MCH) could increase hydrate formation rate, but reduced hydrate storage capacity The higher methylcyclohexane concentration, the lower the hydrate storage capacity. Copyright © 2003 John Wiley & Sons, Ltd.     

陶粒混凝土复合保温板的生产及应用

本文结合国内外生产实践，介绍了陶粒混凝土复合保温板的构造、基本配方、物理力学性能、生产方法与工艺流程以及应用情况。     

花艺之旅：氤氲江南

“周庄”这个地名是在大学课堂上知道的，即将毕业的那个黄梅天，我们忽然决定去周庄。     

液力偶合器变速的渣浆泵系统能耗问题分析及节能降耗对策

以应用液力偶合器变速的渣浆泵系统的运行数据力基础．通过对这些数据的分析处理，得出了这种系统在实际运行时的能耗特点。并提出了应对这些问题的措施，在合理使用液力偶合器和节能降耗方面很有实际意义。     

靶向抗癌药格列卫与其治疗白血病疗效监测

Gleevec是抑制致癌的融合蛋白BCR-ABL的一种分子靶向治疗药物,BCR-ABL是一种与慢性髓细胞性白血病(CML)有关的酪氨酸激酶抑制剂。用Gleevec选择性地抑制BCR-ABL活性在治疗CML中显示出很好的效果,特别是在CML慢性期,因此,监测疗效非常重要。现就Gleevec的研究进展及如何监测其在CML中的疗效作一简单综述。     

Driving Mechanisms of Delamination Related Reliability Problems in Exposed Pad Packages

Exposed pad packages were introduced in the late 1980s and early 1990s because of their excellent thermal and electrical performance. Despite these advantages, the exposed pad packages experience a lot of thermo-hygro-mechanical related reliability problems during qualification and testing. Examples are die lift, which occurs predominantly after moisture sensitivity level conditions, and die-attach to leadframe delamination leading to downbond stitch breaks during temperature cycling. In this chapter, nonlinear finite element (FE) models using fracture mechanics based J-integral calculations are used to assess the reliability problems of the exposed pad package family. Using the parametric FE models any geometrical and material effects can be explored to their impact on the occurrence diepad delamination, and dielift. For instance the impact of diepad size is found to be of much less importance as the impact of die thickness is. Using the fracture mechanics approach, the starting location for the delamination from thermo-hygro-mechanical point of view is deducted. The results indicate that when diepad delamination is present, cracks are likely to grow beneath the die and dielift will occur. The interaction between dielift and other failure modes, such as lifted ball bonds, are not found to be very significant. The FE models are combined with simulation-based optimization methods to deduct design guidelines for optimal reliability of the exposed pad family.     

汽轮机叶片用X20Cr13钢的热处理工艺研究

采用正交试验对汽轮机叶片用X20Cr13钢进行了热处理工艺研究，以获得该钢的最佳热处理工艺，并在回火后以不同的速度冷却，以揭示冷却速度对钢的回火脆性的影响。结果，X20Cr13钢的最佳热处理工艺为900℃油淬或风冷，670℃回火，风冷。     

Optimal transfer trees and distinguishing trees for testing observable nondeterministic finite-state machines

The fault-state detection approach for blackbox testing consists of two phases. The first is to bring the system under test (SUT) from its initial state to a targeted state t and the second is to check various specified properties of the SUT at t. This paper investigates the first phase for testing systems specified as observable nondeterministic finite-state machines with probabilistic and weighted transitions. This phase involves two steps. The first step transfers the SUT to some state t' and the second step identifies whether t' is indeed the targeted state t or not. State transfer is achieved by moving the SUT along one of the paths of a transfer tree (TT) and state identification is realized by using diagnosis trees (DT). A theoretical foundation for the existence and characterization of TT and DT with minimum weighted height or minimum average weight is presented. Algorithms for their computation are proposed.     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

一种基于bit位的运动补偿方法

本文讨论了等离子体显示屏所特有的在显示运动画面时出现的伪轮廓线现象，对产生的原因进行了分析并给出了软件模拟的结果。在此基础上，提出了一种基于bit位的运动补偿方法来改善运动图像的画面质量，同时根据人眼的视觉特征对补偿方法做了进一步的优化。最后对基于bit位的运动补偿方法进行了比较和验证，结果表明基于bit位的运动补偿方法可以基本消除运动画面的伪轮廓线现象。