职业技能考证项目培训课程的网络教学融合应用与创新

以Moodle平台为依托,为职业技能考证实训教学环节构建了一个引领学生在线自主学习的网络模式,其主要特色是以课程理论为基础,以校企参与制定的人才培养计划作为主要课程内容,以合作企业作为教学的组织形式,并且将三者有机融合形成体系,以此进行理论与实际的一体化教学;同时融合网上异步教学理念形成一套崭新的教学模式。     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

The SMSI between supported platinum and CeO2–ZrO2–La2O3 mixed oxides in oxidative atmosphere

CeO₂–ZrO₂–La₂O₃ (CZL) mixed oxides were prepared by citric acid sol–gel method. The as-received gel was calcined at 500, 700, 900 and 1050 °C to obtain the so-called C5, C7, C9 and CK, respectively. The C5, C7 and C9 powders were impregnated with H₂PtCl₆ and then calcined at 500 °C to prepare P5C5, P5C7 and P5C9, respectively. The impregnated CK powders were calcined at 500, 700 and 900 °C to prepare P5CK, P7CK and P9CK, respectively. The XRD and XPS analyses show that the surface distribution of Pt is evidently influenced by the structural and textural properties of the support. The CO adsorption followed by FTIR reveals that the dispersion and the chemisorption sites of Pt are reduced as the calcination temperature of CZL support increases. The chemisorption ability of the CK samples is even completely deactivated. The encapsulation mechanism, which has been applied to explain the so-called strong metal–support interaction (SMSI) after reductive treatment, is introduced here to demonstrate the abnormal observations though the samples were prepared in oxidative atmosphere. The HRTEM results also confirm this explanation. The effects of oxygen vacancies, the chemisorption sites on the Pt surface and Pt/Ce interfacial sites on the three-way catalytic activities are discussed.     

Isotopic Oxygen Exchange and EPR Studies of Superoxide Species on the SrF2/La2O3 Catalyst

By using the in situ IR spectroscopy, the superoxide species (O₂⁻), characterized by the O–O stretching peak at 1130 cm⁻¹, was detected on the SrF₂/La₂O₃ catalyst at temperatures up to 973 K. The introduction of ¹⁸O₂ isotope caused the 1130 cm⁻¹ peak to shift to lower wavenumbers (1095 and 1064 cm⁻¹), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance of the O₂⁻ species and that of the formation of C₂H₄ was observed, suggesting that O₂⁻ was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF₂/La₂O₃ catalyst. This conclusion was reinforced by the EPR experiments (g_xx = 2.0001, g_yy = 2.0045, g_zz = 2.0685), showing that O₂⁻ was the only paramagnetic oxygen species detectable on the O₂-preadsorbed SrF₂/La₂O₃ catalyst. These results suggest that superoxide O₂⁻ can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked.     

Compatibilization and toughening of poly(2,6‐dimethyl‐1,4‐phenylene oxide)/polyamide 6 alloy with poly(ethylene 1‐octene): Mechanical properties,morphology, and rheology

Blends of a poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO)/polyamide 6 (PA 6) alloy toughened with a novel polyolefin elastomer poly(ethylene‐1‐octene) (POE) were prepared via melt extrusion. In order to improve the compatibilization between POE and the PPO/PA 6 alloy, POE was grafted with maleic anhydride (MA), which could react with the amine group of PA 6. The Izod impact strength of the blends exhibited an optimum when the extent of MA grafting of POE was changed, which is an order of magnitude higher than that of the untoughened blends. The morphology revealed that the size of the POE particles decreased with an increasing MA grafting ratio of POE. Studies on the tensile properties and rheology of the blends were also carried out. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3110–3116, 2003     

医技工作量填报及查询系统的设计

本文在原有医院信息管理系统的基础上,设计医技工作量填报及查询系统,提高医技科室的工作质量,并采用C／S架构,应用SQL数据库和C社语言实现。     

Effect of barium oxide on the formation and coexistence of tricalcium silicate and calcium sulphoaluminate

Formation and coexistence of tricalcium silicate (C₃S) and calcium sulphoaluminate (C₄A₃ ) minerals in Portland cement clinker containing calcium sulphoaluminate were investigated. The f-CaO content, mineral composite and formation of mineral in the clinker were analyzed respectively by chemical analysis, differential scanning calorimetry(DSC) and X-ray diffraction. The results show that, adding a suitable amount of BaO can improve the burnability of raw meal and promote the f-CaO absorption. Tricalcium silicate and calcium sulphoaluminate minerals can form and coexist in clinkers at 1 234–1 317 °C by the addition of BaO to the raw meal. A suitable amount of BaO expanded the coexistence temperature of two minerals by 58 °. Funded by the National Basic Research Program of China (No. 2009CB623100), National Eleven Five-Year Scientific and Technical Support Plans (No. 2006BAF02A24), the Natural Science Fund for Colleges and Universities in Jiangsu Province(No. 08KJB430006), the Open Fund for the Key Laboratory of Inorganical and Composite Materials in Jiangsu Province(No. wjjqfhxc1200801) and the Innovation Fund of Doctoral Dissertation of Nanjing University of Technology (No. BSCX200705)     

科学发展观视域下的教育创新对摆脱我国经济困境的作用

全球金融危机之下,我国经济出现了一定程度的发展困境,而摆脱困境的出路在于科学发展,科学发展关键在于人才和教育．目前我国教育在观念、方法、格局等方面与培养创新人才有诸多不适应,需要进行相应的调整、改革和创新．     

基于jQuery的动态虚拟场景技术研究

介绍了X3D(eXtensible 3D)虚拟现实技术的特点,分析了使用SM修改虚拟场景的方法.在分析Ajax技术在X3D虚拟现实系统开发中使用现状及存在问题的基础上,提出将jQuery库引入到X3D虚拟系统开发过程中.该方法通过与SAI(scene access interface)的结合,实现了虚拟场景的动态加载和更新,有效提高了系统的开发效率.最后给出了相关应用实例.     

异构CAD系统协同中基于特征的操作命令转换研究

基于特征的操作转换是同步异构CAD协同系统中的核心问题.分析了异构CAD系统协同中基于特征的建模命令转换,提出了特征建模命令映射集合的构建方法.给出了3种CAD系统间拉伸特征操作转换的实例,分析了构建方法,为实现和优化异构CAD系统协同平台打下良好的基础.