铝元素的添加对锆基合金非晶形成能力影响的电子结构模型

通过构建非晶合金的团簇模型，利用离散变分法从电子层次研究了Al元素对Zr-Cu非晶合金中团簇稳定性的影响。结果表明，Al原子的引入提高了团簇中原子间的亲和力，并且随着Al原子数的增加，亲和力增大，导致新的团簇产生，从而破坏了非晶的团簇结构，Al含量对Zr-Al-Ni非晶合金的稳定性的影响可通过Fermi能级处的态密度大小来反映。     

纳米四氧化三铁磁性微粒的表面有机改性

通过液相共沉淀法制备了纳米四氧化三铁溶胶，利用油酸对纳米粒子体进行表面改性和萃取实验，获得油酸包覆的四氧化三铁微粒。采用FT—IR和高分辨透射电镜对改性后的纳米粉体进行结构和形貌的表征。研究结果表明油酸与四氧化三铁纳米粒子间存在化学键结合。油酸对纳米四氧化三铁微粒进行改性，并且对纳米粒子进行包覆，使外表面形成保护层阻止粒子团聚，改性后的四氧化三铁微粒与有机物具有良好的相溶性，采用表面改性显著改善了纳米四氧化三铁微粒的性能指标。     

铜掺杂对(Na0.5K0.5)NbO3无铅压电陶瓷性能的影响

采用传统固相反应法对(Na0.5K0.5)NbO3压电陶瓷进行铜掺杂改性研究。使用SEM、XRD并结合常规压电陶瓷性能测试手段对该体系的显微结构、压电性能等进行表征。研究结果表明:CuO的掺入使材料出现“硬化”现象,即材料的压电系数d33、平面机电耦合系数Kp和介电损耗tanδ下降了,机械品质因子Qm大大提高;CuO掺入量在1%mol时各项性能最佳。另外,从SEM图片中可以看出:(Na0.5K0.5)NbO3压电陶瓷材料的平均晶粒尺寸随着CuO掺入量的增加明显变大。这表明CuO有烧结助熔作用,能降低烧成温度。     

Comparison of RAFT polymerization of methyl methacrylate in conventional emulsion and miniemulsion systems

In this study, we have conducted the reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in two heterogeneous systems, i.e. conventional emulsion and miniemulsion, with identical reaction conditions. The main objective is to compare the living character in both systems according to the nucleation mechanism, the latex stability, the particle sizes and particle size distributions of latexes, the molecular weights and molecular weight distributions (or polydispersity index, PDI) of PMMA, and the kinetics of the RAFT polymerization. The RAFT agent used in both systems was 2-cyanoprop-2-yl dithiobenzoate (CPDB). The effects of an oil-soluble initiator 2,2′-azobisisobutyronitrile (AIBN) and a water-soluble initiator kalium persulfate (KPS) on the RAFT/emulsion and RAFT/miniemulsion polymerizations were investigated. Methyl-β-cyclodextrin (Me-β-CD) was used as a solubilizer. The average molecular weights and molecular weight distributions (PDIs) of dried PMMA samples were characterized by gel permeation chromatography (GPC). The experimental results showed that the RAFT/miniemulsion polymerization of MMA exhibited better living character than that of RAFT/emulsion polymerization under the conditions of our experiment. The PDI of PMMA in RAFT/miniemulsion polymerization was decreased with the addition of Me-β-CD. However, Me-β-CD did not have influence on the PDI of PMMA prepared in RAFT/emulsion polymerization.     

冷中间包衬对铸坯皮下气泡的影响

对铸坯产生皮下气泡的原因进行了调查和分析。认为中间包绝热板村中的有机挥发物和残余水分是铸坯产生皮下气泡的主要原因。从中间包绝热板的配方、制造技术和装砌等方面采取改进措施，可有效减少铸坯皮下气泡。     

高水头船闸一字闸门水动力特性数值模拟

针对某山区高水头船闸30 m淹没水深下一字闸门的水动力特性进行研究,借助FLUENT软件提供的Realizable k-ε紊流模型对门体启闭过程非恒定流场进行动态模拟,通过建立由二维平面混合网格纵向拉伸成的三维棱柱体网格,结合2.5D重构和弹性光顺动网格法,在降低网格数量、提高计算效率的同时,实现一字闸门启闭全过程三维流场模拟。引入VOF法对自由水面迭代求解,得到一字闸门启闭过程门前后水位差及动水阻力矩变化规律,将计算结果与模型试验进行比较,两者吻合较好。模拟计算发现:门底间隙对闸门运行整个阶段动水阻力矩均有影响,动水阻力矩峰值随门底间隙增大而变小。     

Fabrication of Porous SiC Ceramics with Special Morphologies by Sacrificing Template Method

Sacrificial template technique is widely used in producing porous materials with controlled morphologies and tailored properties. In this paper, unique templates such as filters, carbon nanotube, carbon fiber and silica were used to make porous SiC ceramic with special morphologies. Template derived porous ceramic plates, SiC nano-net, fiber-inverse and bead-inverse porous SiC ceramic were successfully prepared from the preceramic precursor, polymethylsilane (PMS). The synthesis procedures were involved with the infiltration of the templates with appropriate concentration of the preceramic polymer, their curing, pyrolysis and subsequent template removal. The synthesized porous SiC was characterized by SEM, TEM, XRD and BET methods.     

全同和无规立构聚(N-丙基-2-乙烯基吡啶溴化物)对高岭土悬浮液絮凝作用的研究

本文通过用全同和无规立构的聚(N-丙基-2-乙烯基吡啶溴化物)QIP2VP和QAP2VP为絮凝剂,对高岭土悬浮液进行絮凝实验,研究了絮凝剂分子结构对絮凝效果的影响,得到以下结果:(1)QAP2VP的絮凝能力优于QIP2VP.(2)QAP2VP的絮凝效果随分子量增大而提高,而QIP2VP无此规律.(3)絮凝剂的季铵度很低时,絮凝效果提高.(4)在某絮凝剂浓度出现一个反常絮凝现象,作者认为这是”同电荷稳定“现象.(5)从实验数据得出各实验参数间的关系式.     

氧化锌对高胶凝性水泥熟料矿物形成及强度的影响

采用工业原料配料，对以硅酸三钙（C3S，C=CaO，S=SiO2）、硫铝酸钙（C4A3 S^-，C=CaO，A=Al2O3，S^-=SO4^2-）为主导矿物的含C4A3 S^-矿物硅酸盐水泥熟料的矿物形成及其强度进行了研究。借助X射线衍射和热重一差热分析研究了矿物形成过程；探讨了微量元素ZnO对熟料性能的影响及在熟料体系中的固溶情况。研究结果表明：生料中掺入ZnO可使C4A3 S^-和CaS等矿物通过低温反应形成，共存于同一熟料体系中，并可提高熟料的强度；过高的ZnO含量亦会降低C4A3 S^-矿物的分解温度。     

脉冲式气流干燥器的模拟与结构优化

针对脉冲式气流干燥器,在以能耗最低为主目标函数的操作优化数学模型的基础上,加入了加速段高度、减速段高度及管径比等参数,建立了结构优化数学模型,以干燥每千克水为主目标函数编制了模型寻优程序,计算得出了物料终湿含量要求范围内的最佳结构参数.