沿江圩区排涝水文计算实例

设计排涝模数的计算是圩区排涝规划的主要内容之一,它的大小决定了排涝站的装机容量和涵闸尺寸.本文推求了安徽省马鞍山市大公圩地区的排涝模数,是沿江圩区排涝水文计算的一个应用实例.     

酚醛树脂复合板在热连轧机中的应用

重点分析了现有F7机架出口导卫装置的情况。原导卫材料是由铸钢制造 ,由于摩擦和高温常常引起热连轧带钢表面划伤 ,根据现场实际情况用酚醛树脂复合板替代铸钢导卫装置。实践表明 ,这种改造即可行又可靠 ,并取得了好的效果     

Synthesis and properties of star-like wholly aromatic polyester fibers

Novel star-like wholly aromatic copolyesters having four arms based on a tetraamine star core, p- and m- hydroxybenzoic acids and 6-hydroxy-2-naphthoic acid have been successfully synthesized and spun into fibers for the investigation of the effect of the star-like structure on improving compressive properties of the fiber. The reactivity of the star core was demonstrated using a model compound with FTIR, ¹H and ¹³C NMR spectroscopy. The ¹³C NMR spectrum of the star-like terpolymer having a molar ratio of 10:1 of the monomers to star core showed a characteristic peak at around δ62 ppm which corresponds to a tetra-substituted carbon and thereby demonstrates that the star core was really incorporated into the polymer. The star-like copolyester exhibited a clear stir opalescence and liquid crystalline morphology in the temperature range of 150-280 °C. However, no transition was observed in the DSC thermogram except a clear T_g at 110 °C. The star-like terpolymer fiber, prepared from a polymer with a molar ratio of 500:1 for the monomers to imide core, was spun in the liquid crystalline state at 180 °C. Fiber structure and properties have been studied.     

不同施钾水平对玉米干物质及产量的影响

生物产量是提高经济产量的基础,而施肥是调控生物产量及其组分动态转化的重要手段。本研究通过不同施钾水平对玉米干物质积累动态变化的影响分析,确定出钾肥合理用量,为玉米高产高效栽培提供理论依据。     

Hierarchical production control for a flow shop with dynamic setup changes and random machine breakdowns

In this paper, we study a manufacturing system consisting of two machines separated by two intermediate buffers, and capable of producing two different products. Each product requires a constant processing time on each of the machines. Each machine requires a constant non-negligible setup change time from one product to the other. The demand rate for each product is considered to be piecewise constant. Each machine undergoes failure and repair. The time-to-failure and time-to-repair are exponentially distributed random variables. The setup change and processing operations are resumable. We model our system as a continuous time, continuous flow process. An optimal control problem is formulated for the system to minimize the total expected discounted cost over an infinite horizon. To determine the optimal control policy structure, a discrete version of the problem is solved numerically using a dynamic programming formulation with a piecewise linear penalty function. A real-time control algorithm is then developed with the objective of maintaining low work-in-process inventory and keeping the production close to the demand. The algorithm uses a hierarchical control structure to generate the loading times for each product on each machine in real time and to respond to random disruptions in the system. The system is simulated using this algorithm to study its performance. The performance of the algorithm is also compared to alternative policies.     

换热网络数值模拟稳定性分析

换热网络的数值模拟在换热网络的定量分析中起着重要作用。但在模拟计算中,有时表现出数值稳定性差。提高数值稳定性的方法,目前多通过改善算法来实现。本文通过对换热网络数值模拟的误差分析,提出了误差放大因子的概念,并依此选择迭代变量。通过对迭代变量的选择,达到提高换热网络数值模拟稳定性的目的。     

非平衡等离子体协同作用光催化剂催化降解苯

采用非平衡等离子体与光催化剂相结合,对苯的降解进行了实验研究。考察了以不同吸附能力的玻璃球和γ-Al2O3为载体对苯降解率、碳平衡、CO2选择性、NOx及O3生成量的影响;研究了以γ-Al2O3为载体时,水蒸气含量对苯的降解率、碳平衡、CO2选择性、NOx及O3生成量的影响。实验结果表明,以具有吸附性的γ-Al2O3为载体可提高苯的降解率;当能量密度为618J/L时,苯的降解率可达98%;同时可降低O3的生成量,但NOx生成量增加;以γ-Al2O3为载体时,随水蒸气含量的增加,苯的降解率降低,特别是在低能量密度时,水蒸气对苯降解率的影响更为显著,但水蒸气的加入可抑制O3的生成,同时可提高碳平衡值。     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

变异函数在进间砂体预测中的应用

应用变异函数探讨了砂体的定量预测问题。通过对北二东密井网试验区不同类型砂体，不同井网密和岩厚度的预测，检验了此方法的精度（为70％左右），在原方法的基础上，通过对预报精度的分析并结合精度地质研究进一步完善了该方法，提出二次建模法并应用于北二东西块聚驱井的砂岩厚度预测中，预测精度可提高5％以上，从而说明应用变异函数研究砂体的定量预测问题具有可借鉴性，可以为今后新井调整厚度的预测及砂体描述提供依据。