Ti—Al二元合金的成分对组织和力学性能的影响

用金相、扫描电镜和X射线衍射研究了6种不同Al含量Ti-Al二元合金铸态和退火态的组织结构和相组成的特征和变化。从结晶动力学的观点,分析了合金的结晶凝固过程。采用三点弯曲方法研究了合金的抗弯性能同Al含量的关系。结果表明,Al含量为34 wt%,经1100℃/30 h退火的合金抗弯性能最好,Al含量偏离34wt%,都对合金的力学性能不利。     

喷射成形与铸造7A60合金的微观组织对比研究

利用喷射成形技术制备了7A60合金。借助扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD）等手段研究了喷射成形与铸造7A60合金微观组织的特点。结果表明，铸造7A60合金的组织粗大，偏析严重。喷射成形7A60合金主要由细化的等轴晶组成，无明显偏析。与传统铸锭冶金工艺相比，喷射成形工艺大大提高了冷却速率，显著细化了7A60合金的微观组织。     

齿轮精锻的数值模拟与实验研究

本文对空心直齿圆柱齿轮的精锻成形过程进行三维刚塑性有限元模拟和实验研究。通过有限元数值模拟和实验研究 ,得出了直齿圆柱齿轮精锻过程的金属流动规律和变形力学特征 ,揭示了直齿圆柱齿轮精锻过程的变形机理 ,数值模拟结果与实验结果吻合较好     

肥料防结块缓释概况及性能快速表征方法探讨

介绍了颗粒肥料结块的原因机理、影响因素和传统的处理方法。简述了缓释肥料的特点、类型、加工方法以及国内外的研究发展状况。模拟肥料贮存、运输和施用环境以及设计装置，对颗粒肥料防结块、缓释性能快速表征方法进行了有益的探讨。对不同包膜尿素的测试结果表明，所设计的肥料养分释放模拟装置具有较好的应用前景。     

Synthesis and Characterization of 2-(Dimethylamino)ethyl Methacrylate Homopolymers via aqueous RAFT Polymerization and Their Application in Miniemulsion Polymerization

Summary Homopolymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) have been synthesized directly in aqueous media by reversible addition-fragmentation chain transfer polymerization (RAFT) using 4,4-azobis(4-cyanopentanoic acid) (V501) as a water-soluble azo initiator and 4-cyanopentanoic acid dithiobenzoate (CPADB) as a chain transfer agent. The resulting polymers were controlled in the range of narrow molecular weight distributions, with lower than 1.3. Using the produced dithioester-capped DMAEMA homopolymer as a macro chain transfer agent, miniemulsion RAFT polymerization of methyl methacrylate and styrene were carried out, respectively. ¹H NMR analysis showed that the diblock copolymer PDMAEMA-b-PMMA in the form of stable latices was obtained as expected. This revised version was published online at the end of November 2004. Unfortunately, the received date was incorrect due to a technical problem.     

景德镇民营陶瓷企业发展特点及其探讨

分析了景德镇民营陶瓷企业发展特点及其目前存在的问题，并就加快今后景德镇民营陶瓷企业发展步伐提出了几点建议。     

An ergonomics study of thumb movements on smartphone touch screen

This study investigated the relationships between thumb muscle activity and thumb operating tasks on a smartphone touch screen with one-hand posture. Six muscles in the right thumb and forearm were targeted in this study, namely adductor pollicis, flexor pollicis brevis, abductor pollicis brevis (APB), abductor pollicis longus, first dorsal interosseous (FDI) and extensor digitorum. The performance measures showed that the thumb developed fatigue rapidly when tapping on smaller buttons (diameter: 9 mm compared with 3 mm), and moved more slowly in flexion–extension than in adduction–abduction orientation. Meanwhile, the electromyography and perceived exertion values of FDI significantly increased in small button and flexion–extension tasks, while those of APB were greater in the adduction–abduction task. This study reveals that muscle effort among thumb muscles on a touch screen smartphone varies according to the task, and suggests that the use of small touch buttons should be minimised for better thumb performance.     

皂化膜萃取法制备环烷酸钕的研究

提出了一种在室温条件下 ,皂化膜萃取法合成稀土橡胶主催化剂环烷酸钕的新工艺 ,并对其影响因素和反应机理进行了研究。采用皂化萃取工艺 ,可提高Nd3 +的利用率 ,并可根据皂化率任意控制游离酸浓度。采用膜萃取工艺可减少环烷酸钕中的含水量 ,制得的环烷酸钕具有良好的二烯烃定向聚合活性。     

Kinetic study of the curing behavior of bismaleimide modified with diallylbisphenol A

The curing kinetics of bismaleimide modified with diallylbisphenol A were investigated for different ratios of 1,1′‐(methylene di‐4,1‐phenylene) bismaleimide and diallylbisphenol A with differential scanning calorimetry. Multiheating‐rate and isothermal methods were used to study the kinetics of the curing process. The results indicated that the activation energy changed with the extent of conversion. The activation energy obtained by the multiheating‐rate method was higher than that obtained by the isothermal method. Two kinetic models (autocatalytic and nth‐order) were successfully used to model the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2229–2240, 2003