InAs／InP_（0．7）Sb_（0．3）热电子晶体管的f_T及f_（max）

用电荷控制及热电子弹道运动模型计算ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３热电子晶体管的截止频率ｆＴ及最高振荡频率ｆｍａｘ。结果表明，ｆＴ、ｆｍａｘ分别达到２８０ＧＨｚ及６００ＧＨｚ。并指出，通过生长ＧａＳｂ中间层，ＩｎＡｓ／ＩｎＰ０．７Ｓｂ０．３ＨＥＴ可在ＧａＡｓ衬底上实现单片集成。     

Dynamic oxide voltage relaxation spectroscopy

A new method for trap characterization of oxidized silicon is described. The Dynamic Oxide Voltage Relaxation Spectroscopy (DOVRS) is an improved version of the formerly proposed Oxide Voltage Relaxation Spectroscopy (OVRS) technique which applies a periodic long duration constant current for tunneling injection. It has been demonstrated that the new technique can be used not only to separate and identify the oxide trap from interface trap, but also to separate and determine the centroid from the oxide trap density generated in the MOS system by the tunneling current stress. In the pulse constant current mode, the OVRS measurement can be completed instead of using the double current-voltage technique. Thus the new method results in more accurate and quicker measurements of the oxide trap centroid. Analytical expressions for computing the paramaters of the interface and oxide traps are derived. The effect of the channel carrier mobility on the spectroscopy is also considered. Two types of oxide and two types of interface traps were observed at a pulse constant Fowler-Nordheim current stress by the new method of DOVRS     

A three-dimensional non-epitaxial atomistic growth model for thin-film deposition: effect of surface mobility

The effect of the atomic mobility on a film surface has been studied by using a three-dimensional atomistic thin-film deposition model which simulates three-dimensional thin-film images, surface profiles and cross-sectional area pictures. In addition, quantitative results of surface RMS roughness, average film thickness, atomic coordination number and its distribution, and solid fraction of the deposited thin films, were obtained from the simulations. When the film surface mobility increased from 0.3 to 3.0, RMS roughness decreased from 6.5 to 1.1, solid fraction increased from 0.27 to 0.56 and average film thickness decreased from 40 to 28, due to the reduction of the voids within the film. The full-width half magnitude of the atomic coordination distribution became narrower indicating the increased degree of crystallization. With increase in surface mobility crossing the boundary to 1.5, the film evolved from a porous or loose columnar structure with voids, to a densely packed fibrous grain structure which can be categorized by the zone structure models.     

自韧Si3N4陶瓷的显微结构及其性能研究

利用热压的方法制得室温断裂韧性和抗弯强度分别为１１．２ＭＰａ·ｍ￣（１／２）、８２３ＭＰａ，高温（１３５０℃）断裂韧性和抗弯强度分别为２３．９ＭＰａ·ｍ￣（１／２）、６３０ＭＰａ的自韧Ｓｉ＿３Ｎ＿４陶瓷。研究了显微结构和力学性能之间的关系。结果表明：玻璃相的含量、β－Ｓｉ＿３Ｎ＿４的长径比等对性能有重要影响。分析了自韧Ｓｉ＿３Ｎ＿４陶瓷的增韧机理，通过ＳＥＭ明显观察到Ｓｉ＿３Ｎ＿４中存在裂纹偏转、分支和β－Ｓｉ＿３Ｎ＿４拔出现象。     

高温过热器12Cr2MoWVTib（102）钢管的显微组织和相结构分析

本文对原始状态和在火力发电厂使用不同时间的高这热器１０２钢管进行了显微组织和相结构变化规律的探讨和研究。显微组织研究表明，１０２钢管在高温高压下长期运行过程中，使用温度对显微组织和碳化物相有明显影响，而使用时间对其影响不如温度影响强烈。碳化物颗粒图象分析表明，碳化物随着使用时间缓慢长大，而新的碳化物不沉淀，使颗粒总数不断增加，颗粒，间距逐渐缩小。Ｘ射线衍射数据证明，钢管在高温长期使用过程中，ＭＣ相     

沉积方式与基体材料对TiN薄膜内应力的影响

本文研究了TiN薄膜在化学气相沉积、物理气相沉积(包括热灯丝离子镀和多弧离子镀)以及等离子增强化学气相沉积等不同生成条件下的内应力变化。并通过改变钢及硬质合金基体的化学成份和表面状态。考察了基体材料对薄膜应力的影响。在此基础上,对薄膜内应力的形成机制进行了分析讨论。     

变速箱结构设计专家系统技术的研究

结构设计是机械产品设计过程中的重要环节，解决结构设计的智能化不但可以缩短产品的设计周期，而且还可以降低成本，提高设计质量。专家系统是解决智能化设计的技术之一。本文讨论有关结构专家系统的几个关键技术，主要包括系统的控制策略，面积对象的知识表达方式及结构设计的并行设计     

Microwave spectra of CD3OH methanol

The microwave spectrum of CD₃OH has been studied over the 8 to 58 GHz region, and numerousb-type transitions have been assigned. Many of these belong toP subbranches which descend to the microwave region from subband origins lying much higher in the far-infrared, pass through zero frequency, and return upward again. Others are members ofb-typeQ branches which extend across the region. As well, variousa-typeK-doublet lines arising as transitions directly across the split levels of asymmetry doublets have been identified.