单轴-平面W型复合锶铁氧体的制备及其吸波特性研究

用草酸盐共沉淀和微量掺杂法研制六角晶系W型Ni,Zn,Co,Al多元复合锶铁氧体，通过调节Ni2W同Co2W的摩尔比例，可使该种铁氧体易磁化方向从C单轴型向垂于C轴的平面型转化，控制置换锶铁氧体中部分Fe3 的微量掺杂Al3 ，可以调整4πMs值，提高磁晶各向异性场，测试分析了5种不同含Co量的W型复合锶铁氧体粉料涂层的吸波特性，发现其自然共振吸收峰随Co含量增加向低频方向偏移，最高吸收峰可达32．8dB，是适用于电子隐形技术的高品位的微波吸收剂。     

TMS320 F206定点DSP芯片开发实践

以TMS320F206为例,着重探讨了DSP系统开发过程中的硬件设计与调试、软件设计中的流水线冲突、等待状态设置以及如何利用闪速存储器等相关问题.     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

The levels of integrin alpha v beta 5 may predict the susceptibility to adenovirus-mediated gene transfer in human lung cancer cells

Adenovirus mediated transfer of growth-inhibiting molecules, such as p53 shows promise as an effective method of suppressing the growth of cancer cells. As the basis for in vivo studies, we examined transfection efficiency using 15 human lung cancer cell lines that differ in their endogenous p53 status. When infected with an adenovirus expressing bacterial beta-galactosidase, the different cell lines showed different levels of beta-galactosidase activity. We found a correlation between the level of integrin alpha v beta 5, which is thought to be an adherence receptor for adenoviruses, and the expression level of the transferred gene, suggesting that gene expression is largely dependent on the infection efficiency. Growth inhibition was induced in all cell lines tested following infection with an adenovirus containing p53, regardless of the genetic status of their endogenous p53 provided a sufficient amount of p53 protein was expressed. Our results (1) confirm that the examination of the susceptibility of target cancer cells to an adenovirus is important when considering performing adenovirus-mediated gene transfer and for evaluating its therapeutic effects; and (2) suggest that the quantification of integrin alpha v beta 5 may be a good way of predicting the susceptibility of cells to adenoviral vectors.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

基于STEP的零件加工工艺计划模型

为了满足ＣＩＭＳ环境下工艺系统与其它系统集成的需要，建立了标准工艺计划模型具十分重要的意义。本文描述了一个基于ＳＴＥＰ的零件加工工艺计划模型，介绍了建立这一模型的关键技术，给出了参照ＳＴＥＰ建立工艺计划模型的方法。     

抽油机减速器齿轮的失效分析

找出了人字齿轮减速器在工作中右端齿轮出现严重磨损的原因并进行了分析。提出在国内现有制造技术的条件下，对于37kN·m以下的减速器应推广使用斜齿轮传动。     

单稳态触发器的结构及其开关级设计原理

根据单稳态触发器定时单元特性,提出了单稳态触发器的一般结构.在此基础上,运用传输电压开关理论进行了CMOS单稳态触发器的开关级设计研究,并具体设计了两个单稳态触发器.设计实例表明文中提出的方法不仅简单、有效,而且具有通用性.     

60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响     

由碳五馏分合成甲基叔戊基醚工艺的研究

以催化裂化C_5馏分与工业甲醇为原料,D005型大孔强酸型阳离子交换树脂为催化剂,采用筒式膨胀床双反应器,考察了甲基叔戊基醚的合成工艺条件。一阶反应器的操作条件为：循环比为2：1,醇烯比为1.2：1,入口温度为70℃,空速为6 h~(-1),平均转化率为53.63%；二阶反应器的操作条件为：入口温度为50℃,空速为1.2h~(-1),平均转化率为71.32%,全调合方案可以使催化裂化汽油的辛烷值平均提高0.55个单位。