The structure solution of the F-type i-ZnMgHf from the X-ray diffraction

ABSTRACT

We report a successful growth of the ZnMgHf F-type icosahedral quasicrystal in the form of faceted single grains. By varying the heat treatment parameters we were able to obtain single crystals with a quality suitable for a single crystal X-ray diffraction which was conducted in a synchrotron facility. Ab initio structure solution by a charge flipping algorithm manifests the existence of two types of Bergman clusters. Clusters are differentiated by the preferential occupation of the high-symmetry positions by hafnium in a rhombic triacontahedron, being the outer shell of the atomic cluster.

This paper is part of a Thematic Issue on The Crystallographic Aspects of Metallic Alloys.     

Therapeutic Strategies for Disseminated Intravascular Coagulation Associated with Aortic Aneurysm

Aortic aneurysms are sometimes associated with enhanced-fibrinolytic-type disseminated intravascular coagulation (DIC). In enhanced-fibrinolytic-type DIC, both coagulation and fibrinolysis are markedly activated. Typical cases show decreased platelet counts and fibrinogen levels, increased concentrations of fibrin/fibrinogen degradation products (FDP) and D-dimer, and increased FDP/D-dimer ratios. Thrombin-antithrombin complex or prothrombin fragment 1 + 2, as markers of coagulation activation, and plasmin-α₂ plasmin inhibitor complex, a marker of fibrinolytic activation, are all markedly increased. Prolongation of prothrombin time (PT) is not so obvious, and the activated partial thromboplastin time (APTT) is rather shortened in some cases. As a result, DIC can be neither diagnosed nor excluded based on PT and APTT alone. Many of the factors involved in coagulation and fibrinolysis activation are serine proteases. Treatment of enhanced-fibrinolytic-type DIC requires consideration of how to control the function of these serine proteases. The cornerstone of DIC treatment is treatment of the underlying pathology. However, in some cases surgery is either not possible or exacerbates the DIC associated with aortic aneurysm. In such cases, pharmacotherapy becomes even more important. Unfractionated heparin, other heparins, synthetic protease inhibitors, recombinant thrombomodulin, and direct oral anticoagulants (DOACs) are agents that inhibit serine proteases, and all are effective against DIC. Inhibition of activated coagulation factors by anticoagulants is key to the treatment of DIC. Among them, DOACs can be taken orally and is useful for outpatient treatment. Combination therapy of heparin and nafamostat allows fine-adjustment of anticoagulant and antifibrinolytic effects. While warfarin is an anticoagulant, this agent is ineffective in the treatment of DIC because it inhibits the production of coagulation factors as substrates without inhibiting activated coagulation factors. In addition, monotherapy using tranexamic acid in cases of enhanced-fibrinolytic-type DIC may induce fatal thrombosis. If tranexamic acid is needed for DIC, combination with anticoagulant therapy is of critical importance.     

Effects of particle dispersion and circulation systems on classification performance

To classify fine powders with particles smaller than 1 μm in diameter, air classifier design must take three factors into consideration: dispersion of feed powders, air flow uniformity in the classification zone, and recovery of fine particles adhering to the coarse fraction. The effects on the classification performance of a centrifugal air classifier using a dispersion nozzle for particle dispersion and a circulation mechanism using channel air jets for the recovery of fine particles are discussed.

By using a dispersion nozzle, the classification sharpness index was improved below 0.8 (D_p/D_p50) and the fine fraction yield was improved by 64% without changing size distribution. The circulation mechanism using channel air improved classification performance by 58% of the classification sharpness index and 65% of the fine fraction yield, although the particle size distribution of the fine fraction became 0.1 μm coarser than that without channel air.     

Graphitization of carbon fibre/ glassy carbon composites

Carbon fibre/glassy carbon composites were prepared by aligning unidirectionally in furfuryl alcohol condensate the PAN-based carbon fibres treated at different temperatures and with different degrees of stretching. The graphitization of the composites was found to start at the boundary between the fibres and glassy carbon matrix, and to proceed into the matrix. This is considered to be due to the stress accumulation at the boundary caused by a large shrinkage of the matrix. The carbon fibres remain nongraphitized even after a heat-treatment at 2800°C. The composites heat-treated at high temperature (2800°C) are found to show a high overall degree of graphitization, unexpected on basis of the known graphitization behavior of carbon fibres and of glassy carbon, and a high degree of uniaxial preferred orientation of crystallites.     

Crystallinity of Acid Treated Corn Starch

The hydrolysis of corn starch by 1N H₂SO₄-30% ethanol aqueous solution at 45°C increased linearly with increasing of hydrolysis time for 20 d. The relative crystallinity of native corn starch showed 0.350 by X-ray diffraction and it increased gradually with increasing of hydrolysis time up to 8 d. The increasing ratio of 1/hydrolysis residue to hydrolysis time increased more largely than that of relative crystallinity after 14 d. On the other hand, the relative crystallinity of native corn starch by deuteration showed 0.341 very near to the value by X-ray diffraction. Moreover, this increasing ratio of the crystallinity accompanied by acid hydrolysis showed an inclination similar to that given by X-ray diffraction. These facts suggest that the exchanging of OH for OD groups may be caused very a little in crystalline region of corn starch granules.     

Analyses of reactor building by 3D nonlinear FEM models considering basemat uplift for simultaneous horizontal and vertical ground motions

The nonlinear behavior of basemat uplift, which is an important point in seismic designs of nuclear power plants in Japan, has been investigated by arranging joint elements between the reactor building basemat and the soil on a three-dimensional (hereafter referred to as 3D) FEM model of the soil. However, the nonlinearity of the basemat uplift has been investigated separately from the nonlinearity of reactor buildings. These nonlinearities have yet to be taken into account simultaneously in past studies. In this paper, models of the building and the soil using 3D FEM elements with consideration to the nonlinearity of building materials as well as the nonlinearity of the basemat uplift were subjected. The behavior of the building's elements were investigated by carrying out seismic response analyses for horizontal ground motions only, as well as for simultaneous horizontal and vertical ground motions using these models. As a result, it was found that there was little difference in the horizontal response of the building between the horizontal input motions only and the simultaneous horizontal and vertical input motions. The effects of the vertical ground motions on the basemat uplift behavior which is represented by the ground contact ratio were also slight.     

Safety design of Pb–Bi-cooled direct contact boiling water fast reactor (PBWFR)

In Pb–Bi-cooled direct contact boiling water small fast reactor (PBWFR), steam is generated by direct contact of feedwater with primary Pb–Bi coolant above the core, and Pb–Bi coolant is circulated by steam lift pump in chimneys. Safety design has been developed to show safety features of PBWFR. Negative void reactivity is inserted even if whole of the core and upper plenum are voided hypothetically by steam intrusion from above. The control rod ejection due to coolant pressure is prevented using in-vessel type control rod driving mechanism. At coolant leak from reactor vessel and feedwater pipes, Pb–Bi coolant level in the reactor vessel required for decay heat removal is kept using closed guard vessel. Dual pipes for feedwater are employed to avoid leak of water. Although there is no concern of loss of flow accident due to primary pump trip, feedwater pump trip initiates loss of coolant flow (LOF). Injection of high pressure water slows down the flow coast down of feedwater at the LOF event. The unprotected loss of flow and heat sink (ATWS) has been evaluated, which shows that the fuel temperatures are kept lower than the safety limits.