Preparation and Characterization of C10–C14 Alkyl Cellulose Ester Sulfate Surfactant

The aim of this work is to synthesize surfactants based on cellulose with different molecular weights. Raw cotton cellulose was tailored into cellulose segments with different molecular weights by a hydrothermal process, then the average degree of polymerization (DP) was determined by viscosimetry and the molecular weight distribution was estimated by gel permeation chromatography. The C₁₀–C₁₄ alkyl cellulose ester sulfate surfactants were prepared by hydrophilic sulfonation and hydrophobic esterification. The surface tension of the surfactants solution was obtained by the Wilhelmy plate method. Results showed that the cellulose segments presented a broader distribution compared with the raw material. The critical micelle concentration (CMC) value decreased from 1.08 to 0.86 wt% as the hydrophobic chain length was increased from 10 to 14. The CMC values of cellulose surfactants with C₁₄-acyl chloride hydrophobization decreased from 1.32 to 0.86 wt% as the DP was decreased from 2,700 to 296.     

射流曝气技术在FCC烟气脱硫废水处理中的应用

目前流化催化裂化(FCC)装置烟气脱硫净化基本采用钠碱湿法洗涤技术,该工艺不可避免地产生大量高化学需氧量(COD)脱硫废水。介绍了射流曝气技术在FCC烟气脱硫废水氧化中的应用,并阐述了射流曝气技术的性能特点。结合工程应用情况,分析了供气方式、工作压力、浆液池水深和布置方式等影响因素。工程应用结果显示:脱硫废水经射流曝气氧化后,COD不大于30 mg/L,COD平均去除率可达95%,远低于国家现行排放标准要求。     

Assembly of Enantioenriched cis‐3a,8a‐Hexahydropyrrolo[2,3‐b]indole Scaffolds by Silver(I)‐Catalyzed Asymmetric Domino Reaction of Isocyanoacetates in the Presence of Cinchona‐Derived Chiral Phosphorus Ligands

By using Cinchona‐derived chiral phosphines as catalytic ligands, enantioenriched cis‐3a,8a‐hexahydropyrrolo[2,3‐b]indoles (ent‐HPIs), which are core scaffolds in a large array of biologically active natural products, can be convergently assembled under mild conditions through the silver(I)‐catalyzed asymmetric domino reaction of readily available isocyanoacetates and 2‐(2‐aminophenyl)acrylates. Various functionalities can be tolerated in the reaction, affording enantioenriched HPIs in high overall yields and good enantioselectivities (up to 92% ees).

     

Visible Light‐Initiated C(sp3)?Br/C(sp3)?H Functionalization of α‐Carbonyl Alkyl Bromides through Hydride Radical Shift

A new visible light‐initiated 1,5‐hydride radical shift strategy has been developed to enable the one‐step functionalization of both a C(sp³) Br bond and a C(sp³) H bond adjacent to the same carbon atom. This visible light photoredox catalysis offers a mild and straightforward access to diverse five‐membered carbocyclic ring‐fused polycyclic hydrocarbons with high turnover numbers (TONs; up to 4.93×10³) and broad substrate scope.

     

Copper‐Catalyzed Allenylation‐Isomerization Sequence of Penta‐1,4‐diyn‐3‐yl Acetates with P(O)H Compounds: Facile Synthesis of 1‐Phosphonyl 2,4‐Diynes

The copper‐catalyzed reaction of 5‐substituted penta‐1,4‐diyn‐3‐yl acetates with P(O)H compounds to efficiently give a new class of phosphonyl diynes is reported. The reaction may take place through a regioselective nucleophilic attack of phosphorus nucleophiles on Cu‐allenylidene intermediates to form allenyl intermediates followed by a rapid allene‐alkyne isomerization process. The synthetic utility of the obtained products is demonstrated.

     

Enhanced mechanical,thermal and dielectric properties of polyimide nanocomposites containing SiCp (SiCw) nanofillers for high energy-storage applications

Journal of Polymer Research - In this paper, we aimed to develop the nanocarrier based on poly (N-isopropyl acrylamide)—allyl acetoacetate grafted MoS2 nanosheets. The obtained polymer...     

Formation mechanism and microhardness characterization of the ultrasonic hardening layer in cementitious materials

Ultrasonic surface treatment (UST) is a novel treatment method to improve the durability of cementitious materials, resulting in the formation of an ultrasonic hardening layer (UHL). The UHL acts as an effective natural coating, offering penetration and erosion protection. However, the formation mechanism and the quantitative characterization of the UHL have not been studied, and the validity of the UST on the top and side surfaces of cementitious materials is still unknown. Therefore, in this study, we investigated and proposed a formation mechanism for the UHL, and defined a transition layer between the UHL and the matrix. We also utilized HV microhardness testing to provide an effective quantitative characterization method for the UHL. Finally, using a set of custom-designed ultrasonic molds, we confirmed the validity of the UST on the top and side surfaces of the cementitious materials.     

Design and Numerical Optimization of Gas Guidance System in Casting Silicon Furnace by the Orthogonal Experiment

Silicon - 3D global simulations were performed to investigate the gas flow and impurities transport in casting silicon furnace under the influence of a unique designed spray-type gas guidance...     

Numerical Modeling and Experimental Study of Laser Assisted Machining of Fused Silica

Silicon - Fused silica is a kind of high-strength optical material, which is widely used in industry. It is slow and inefficient to process hard and brittle materials by conventional machining (CM)...     

Novel Fast-switching LIGBT with Single-Step Low-k Dielectric Layer and Assistant-Depletion Trench

Silicon - A novel low-loss and good-robustness silicon-on-insulator lateral insulated gate bipolar transistor (LIGBT) is proposed and investigated by simulation for the first time. The device is...