Selective Raman Scattering Detection of the Dirac Node and the Anti-node of the Spin Density Wave Gap and Magnetic Excitations in BaFe2As2

The electronic and magnetic excitations at the spin density wave (SDW) transition are investigated by Raman scattering. The multi-orbital electronic states induce the Dirac nodes in the SDW gap. The excitations near the nodes and anti-nodes are separately detected in accordance with the two-orbital tight-binding model. The exchange interactions are found to be given by the second derivative of the total energy with respect to the angle of the moment from two-magnon scattering. The two-magnon peak has the large spectral weight above twice the maximum energy of magnon. It is interpreted by the magnetic self-energy of the electron spectral function in the localized spin model or particle-hole excitations in the itinerant spin model.     

Catalyst‐Free GaN Nanorods Synthesized by Selective Area Growth

GaN nanorod formation on Ga‐polar GaN by continuous mode metalorganic chemical vapor deposition selective area growth (MOCVD SAG) is achieved under a relatively Ga‐rich condition. The Ga‐rich condition, provided by applying a very low V/III ratio, alters the growth rates of various planes of the defined nanostructure by increasing relative growth rate of the semi‐polar tilted m‐plane {1–101} that usually is the slowest growing plane under continuous growth conditions. This increased growth rate relative to the non‐polar m‐plane {1–100} and even the c‐plane (0001), permits the formation of GaN nanorods with nonpolar sidewalls. In addition, a new growth mode, called the NH₃‐pulsed mode, is introduced, utilizing the advantages of both the continuous mode and the lower growth rate pulsed mode to form nanorods. Finally, nanorods grown under the different growth modes are compared and discussed.     

Conversion of aqueous extracts from thermochemical treatment of bagasse into functional emulsifiers

Synthetic emulsifiers in food industries are being replaced with a customer-friendly food ingredient that is derived from biomass using sustainable green technologies. After hydrothermal liquefaction treatment, raw bagasse (21%), pith (26%), and rind portions (25%) were obtained with reduced ash contents. As aqueous extracts, with oligosaccharides and lignin residues, it was used in the preparation of oil-in-water emulsions with 5% soybean oil. Results showed that the emulsions stabilised the oil droplets with particle size between 11 and 17 µm by steric repulsion with raw bagasse-stabilised emulsion showing a better stability at 25 °C (31 days). It was demonstrated that raw bagasse extracts, without alteration, maybe a potential unconventional source for food-grade emulsifiers by integrating a versatile thermochemical conversion of waste without the use of chemicals.     

Development and field test of the articulated mobile robot T2 Snake-4 for plant disaster prevention

Abstract

In this work, we develop an articulated mobile robot that can move in narrow spaces, climb stairs, gather information, and operate valves for plant disaster prevention. The robot can adopt a tall position using a folding arm and gather information using sensors mounted on the arm. In addition, this paper presents a stair climbing method using a single backward wave. This method enables the robot to climb stairs that have a short tread. The developed robot system is tested in a field test at the World Robot Summit 2018, and the lessons learned in the field test are discussed.     

Quantitative Magneto-Optical Imaging of Supercurrents in Heavy-Ion Irradiated Cuprate and Pnictide Superconductors

Spatial distributions of magnetic field and of current density in superconductors are obtained, in real-time, by the magneto-optical imaging technique with an indicator film. Quantitative values of the local magnetic field and then of the local current density were achieved by a careful optical calibration and custom algorithms for the inversion of Biot–Savart law. An iterative procedure was developed for the correction of artifacts due to the coupling of the indicator film magnetization with the in-plane magnetic field generated by the superconducting sample. This technique is highly valuable when the sample under study has nonuniform properties. Several cases of such systems are shown. Particular attention is devoted to the local variation of structural and chemical properties by means of heavy-ion irradiation. A comparative study of swift-ion irradiation effects between cuprate and pnictide superconductors is addressed. For the case of cuprate materials, some successful applications of the heavy ion irradiation engineering are presented and discussed.     

A novel sphingophosphonolipid head group 1-hydroxy-2-aminoethyl phosphonate in Bdellovibrio stolpii

Members of the bacterial genus Bdellovibrio include strains that are free-living whereas others are known to invade and parasitize larger Gram-negative bacteria. The bacterium can synthesize several sphingophospholipid compounds including those with phosphoryl bonds as well as phosphonyl bonds. In the present study, the dominant sphingophosphonolipid component was isolated by column chromatography, and the long-chain bases, fatty acids, and polar head groups were identified by thin-layer and gas-liquid chromatographic procedures. The definitive structural identity of the sphingolipid was established by nuclear magnetic resonance and mass spectrometry of hydrolysis products and the intact compound. The compound was identified as N-2′-hydroxypentadecanoyl-2-amino-3,4-dihydroxyheptadecan-1-phosphono-(1-hydroxy-2-aminoethane).     

Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

东京中心城区的规划历程及其现状——探索迈向成熟都市的阶梯

在梳理东京都城市中心的形成以及城市规划史的基础上,通过选取两大重要的中心街区(丸之内办公街区、银座商业街区)作为案例,进一步剖析近代东京中心城区的形成,以及此后逐步迈向地域主导的规划方式的过程。其中特别着重考察在中心城区形成、发展、更新的过程中将承载了各个历史阶段记忆的街区特征(基因)传承下来并延续到未来的探索和努力。