Magnetic Field Dependence of Internal Josephson Effects in Spinor Dipolar Bose–Einstein Condensates

We study internal Josephson effects in spin-1 Bose–Einstein condensates with magnetic dipole–dipole interactions by calculating the Gross–Pitaevskii equations with single mode approximations. The effects represent various oscillating modes given by combinations of 0, π, and running phase modes in Josephson effects in Bose gasses. Especially, we investigate the dependences of a magnetic field on the effects, presenting new dynamics which is not shown elsewhere.     

Determination of the Local Weight Distribution of Binary Linear Block Codes

Some methods to determine the local weight distribution of binary linear codes are presented. Two approaches are studied: A computational approach and a theoretical approach. For the computational approach, an algorithm for computing the local weight distribution of codes using the automorphism group of the codes is devised. In this algorithm, a code is considered the set of cosets of a subcode, and the set of cosets is partitioned into equivalence classes. Thus, only the weight distributions of zero neighbors for each representative coset of equivalence classes are computed. For the theoretical approach, relations between the local weight distribution of a code, its extended code, and its even weight subcode are studied. As a result, the local weight distributions of some of the extended primitive Bose-Chaudhuri-Hocquenghen (BCH) codes, Reed-Muller codes, primitive BCH codes, punctured Reed-Muller codes, and even weight subcodes of primitive BCH codes and punctured Reed-Muller codes are determined     

A self-learning digital neural network using wafer-scale LSI

A large-scale, dual-network architecture using wafer-scale integration (WSI) technology is proposed. By using 0.8 μm CMOS technology, up to 144 self-learning digital neurons were integrated on each of eight 5 in silicon wafers. Neural functions and the back-propagation (BP) algorithm were mapped to digital circuits. The complete hardware system packaged more than 1000 neurons within a 30 cm cube. The dual-network architecture allowed high-speed learning at more than 2 gigaconnections updated per second (GCUPS). The high fault tolerance of the neural network and proposed defect-handling techniques overcame the yield problem of WSI. This hardware can be connected to a host workstation and used to simulating a wide range of artificial neural networks. Signature verification and stock price prediction have already been demonstrated with this hardware     

Aggressive osteoblastoma of the calcaneus

Aggressive osteoblastoma of the left calcaneus in 29-year-old Japanese woman is reported. Her initial symptom was heel pain while walking. This was a primary calcaneal tumor, initially diagnosed as a benign osteoblastoma. After a 5-year follow-up (from the initial curettage), there was local recurrence. The histologic findings of aggressive osteoblastoma were confirmed after right lower leg amputation. The recurrent tumor was mildly aggressive to the talocalcanean joint and the retrocalcaneal area, without distant metastasis. The characteristics of the primary and recurrent tumors were examined by the radiologic, histologic, and electron microscopic procedures. Although there are questions about aggressive osteoblastoma, the authors believe that there are osteoblastic tumors of borderline malignancy between benign osteoblastoma and low-grade osteosarcoma. The current case was an example compatible with an aggressive osteoblastoma with the proposed name of Dorfman classification Group 4.     

Measurement of spreading characteristics of molecularly thin lubricant films over grooved solid surfaces based on diffraction simulations

Characteristics of molecularly thin lubricant films are basically determined by their interactions with solid surfaces. Since these interactions can be modified by engineered microscopic surface textures, it is expected that rational design of the textures will make it possible to attain desired tribological functions and performance. In this research, with the aim of applying it to head-disk interface of hard disk drives, we propose a method based on diffraction simulations that enables thickness measurement of molecularly thin films coated on grooved solid surfaces. Using this method, we experimentally investigate the spreading characteristics of nanometer-thick polymeric liquid lubricant films on grooved surfaces. The results revealed that the average thicknesses of the films dip-coated on the grooved and smooth surfaces under identical conditions were approximately the same, whereas lubricant spreading on grooved surfaces was significantly faster than that on smooth surfaces.     

Evidence for uniparental, paternal expression of the human GABAA receptor subunit genes, using microcell-mediated chromosome transfer

We have constructed mouse A9 hybrids containing a single normal human chromosome 15, via microcell-mediated chromosome transfer. Cytogenetic and DNA-polymorphic analyses identified mouse A9 hybrids that contained either a paternal or maternal human chromosome 15. Paternal specific expression of the known imprinted genes SNRPN (small nuclear ribonucleoprotein-associated polypeptide N gene) and IPW (imprinted gene in the Prader-Willi syndrome region) was maintained in the A9 hybrids. Using this system, we first demonstrated that human GABAAreceptor subunit genes, GABRB3 , GABRA5 and GABRG3 , were expressed exclusively from the paternal allele and that E6-AP (E6-associated protein or UBE3A ) was biallelically expressed. Moreover, the 5' portion of the GABRB3 gene was found to be hypermethylated on the paternal allele. Our data imply that GABAAreceptor subunit genes are imprinted and are possible candidates for Prader-Willi syndrome, and that this human monochromosomal hybrid system enables the efficient analysis of imprinted loci.     

A comparison of the indirect and direct quantification of glycidol ester by kinetic analysis

In a comparison of the German society's official indirect method and the direct LC‐MS method to determine the levels of glycidol fatty acid esters (GEs) in edible oils, the indirect method showed lower GE levels in cases of a high level of GEs and/or containing partial acylglycerols (PGs). The present study used kinetic analysis to compare the scope of both methods. A kinetic model combination of reversible decomposition of GEs and 3‐monochloro‐1,2‐propanediol forming substances (MCPD‐FS) generated from PGs accurately predicted a persistent level of underestimation of commercial vegetable oils when the indirect method was used. The results of the kinetic prediction showed that the underestimation in the indirect method was proportional to the PG and GE levels in oils. Although most conventional cooking oils are low in GEs and PGs, significant error may occur in oils such as palm oil, which are reported to have a higher content of GEs and DAGs. The direct method was affected by neither the GEs nor the PGs, and proved to be a truer and more accurate determinant of GE levels in a wide range of edible oil products.     

Effect of reaction pH and CuSO4 addition on the formation of catechinone due to oxidation of (+)‐catechin

A novel hair dyeing technique being milder and safer for a human body is desired. The oxidation product of (+)‐catechin, catechinone, was invented as a safer dyestuff for hair colouring under such the situation. The preparation of catechinone by a chemical oxidation is a practical way and the objective of the study is clarify the effect of the solution pH and in the presence or absence of Cu²⁺ on the formation rate and yield of catechinone in order to improve the efficiency of the dye formation. The catechinone formation was monitored by ultraviolet‐visible spectroscopy. Catechinone was prepared chemically from (+)‐catechin in aqueous solution with O₂ gas introduced over a pH range of 7.1–11.7. The rate and amount of the dye formation increase with increasing pH. Dissociation of the hydroxyl group of the catechol part of (+)‐catechin is significant for the oxidation of (+)‐catechin and promotes the dye production. This is because the deprotonated (+)‐catechin has a higher reactivity with O₂. The production of catechinone is accelerated by the addition of CuSO₄ and the production rate reaches the maximum at pH = 8.8. (+)‐Catechin ‐ Cu²⁺ complexes are formed and the formation promotes the oxidation of the catechol part of (+)‐catechin at pH ≤ 8.8. On the other hand, the complex becomes too stable to proceed for the oxidation reaction at pH > 8.8.     

Experimental and modeling study of the oxidation of n-butylbenzene

New experimental results for the oxidation of n-butylbenzene, a component of diesel fuel, have been obtained using three different devices. A rapid compression machine has been used to measure autoignition delay times after compression at temperatures in the range 640–960 K, at pressures from 13 to 23 bar, and at equivalence ratios from 0.3 to 0.5. Results show low-temperature behavior, with the appearance of cool flames and a negative temperature coefficient (NTC) region for the richest mixtures. To investigate this reaction at higher temperatures, a shock tube has been used. The shock tube study was performed over a wide range of experimental temperatures, pressures, and equivalence ratios, with air used as the fuel diluent. The ignition temperatures were recorded over the range 980–1740 K, at reflected shock pressures of 1, 10, and 30 atm. Mixtures were investigated at equivalence ratios of 0.3, 0.5, 1.0 and 2.0 in order to determine the effects of fuel concentration on reactivity over the entire temperature range. Using a jet-stirred reactor, the formation of numerous reaction products has been followed at temperatures from 550 to 1100 K, at atmospheric pressure, and at equivalence ratios of 0.25, 1.0, and 2.0. Slight low-temperature reactivity (below 750 K) with a NTC region has been observed, especially for the leanest mixtures. A detailed chemical kinetic model has been written based on rules similar to those considered for alkanes by the system EXGAS developed at Nancy. Simulations using this model have been compared to the experimental results presented in this study, but also to results in the literature obtained in a jet-stirred reactor at 10 bar, in the same rapid compression machine for stoichiometric mixtures, in a plug flow reactor at 1069 K and atmospheric pressure, and in a low-pressure (0.066 bar) laminar premixed methane flame doped with n-butylbenzene. The observed agreement is globally better than that obtained with models from the literature. Flow rate and sensitivity analyses have revealed a preponderant role played by the addition to molecular oxygen of resonantly stabilized, 4-phenylbut-4-yl radicals.