Smart structures and their applications on active vibration control: Studies in the Department of Aerospace Engineering, METU

This work presents the theoretical and experimental studies conducted in Aerospace Engineering Department of Middle East Technical University on smart structures with particular attention given to the structural modelling characteristics and active suppression of in-vacuo vibrations. The smart structures considered in these analyses are finite and flat aluminium cantilever beam-like (called as smart beam) and plate-like (called as smart fin) structures with surface bonded lead–zirconate–titanate patches. Finite element models of smart beam and smart fin are obtained. Then the experimental studies regarding open loop behaviour of the structures are performed by using strain gauges and laser displacement sensor to determine the system models. Further studies are carried out to obtain H _∞ and μ-synthesis controllers which are intended to be used in the suppression of free and forced vibrations of the smart structures. It is observed that satisfactory attenuation levels are achieved and robust performance of the systems in the presence of uncertainties is ensured. In that respect a comparative study involving H _∞ and sliding mode controls is also conducted. Recently, the studies involving aerodynamic loading are also gathering pace.     

Phenol Removal through Chemical Oxidation using Fenton Reagent

In this study, phenol, aromatic, and non‐biodegradable organic matter were investigated and found to be removed from the model solution through chemical oxidation using Fenton reagent. The effects of the initial phenol concentration, hydrogen peroxide, and ferrous sulfate concentrations on the removal efficiency were investigated. Performance of the chemical oxidation process was monitored with phenol and COD (Chemical Oxygen Demand) analyses. In the experimental studies, phenol removal of over 98 % and COD removal of nearly 70 % were achieved. The optimum conditions for Fenton reaction both for initial phenol concentrations of 200 and 500 mg/L were found at a ratio [Fe²⁺]/[H₂O₂] (mol/mol) equal to 0.11. According to the results, chemical oxidation using Fenton reagent was found to be too effective, especially for phenol removal. However, this method has limited removal efficiency for COD.     

Systolic arrays for multidimensional discrete transforms

An active area of research in supercomputing is concerned with mapping certain finite sums, such as discrete Fourier transforms, onto arrays of processors. This paper presents systolic mapping techniques that exploit the parallelism inherent in discrete Fourier transforms. It is established that, for anM-dimensional signal, parallel executions of such transforms are closely related to mappings of an (M + 1)-dimensional finite vector space into itself. Three examples of such parallel schemes are then described for the discrete Fourier transform of a two-dimensional finite extent sequence of sizeN ₁ ×N ₂. The first is a linear array ofN ₁ +N ₂ – 1 processors and takesO(N ₁ N ₂) steps. The second is anN ₁ ×N ₂ rectangular array of processors and takesO(N ₁ +N ₂) steps, and the third is a hexagonal array which usesN ₁ N ₂ + (N ₂ – 1)(N ₁ +N ₂ – 1) processors andO(N ₁ +N ₂) steps. All three mappings are optimal in that they achieve asymptotically the highest speedup possible over the sequential execution of the same transform, and can easily be generalized to higher dimensions.     

Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys

The effects of La content on the mechanical properties and corrosion behavior of as-cast Mg-Zn-Zr (ZK) magnesium alloys were investigated. The results showed that La addition to ZK60 alloy resulted in a considerable grain refinement and an increase in the volume fraction of second phases by formation of Mg-Zn-La ternary phase. The tensile tests were performed at both room and elevated temperatures. At room temperature, the yield and tensile strengths and elongation-to-fracture significantly increased with 0.2 wt.% La addition, then deteriorated slightly with increasing La additions above 0.2 wt.%. At 200 °C, the yield and tensile strengths continually improved and elongation-to-fracture decreased with increasing La content due to the presence of thermally stable Mg-Zn-La phase. Immersion and electrochemical corrosion tests revealed that the formation of Mg-Zn-La phases led to a higher amount of cathodic sites and preferential corrosion propagation, and thus a decrease in the corrosion resistance of ZK60 alloys.     

Adaptive educational hypermedia accommodating learning styles: A content analysis of publications from 2000 to 2011

Implementing instructional interventions to accommodate learner differences has received considerable attention. Among these individual difference variables, the empirical evidence regarding the pedagogical value of learning styles has been questioned, but the research on the issue continues. Recent developments in Web-based implementations have led scholars to reconsider the learning style research in adaptive systems. The current study involved a content analysis of recent studies on adaptive educational hypermedia (AEH) which addressed learning styles. After an extensive search on electronic databases, seventy studies were selected and exposed to a document analysis. Study features were classified under several themes such as the research purposes, methodology, features of adaptive interventions and student modeling, and findings. The analysis revealed that the majority of studies proposed a framework or model for adaptivity whereas few studies addressed the effectiveness of learning style-based AEH. Scales were used for learning style identification more than automatic student modeling. One third of the studies provided a framework without empirical evaluation with students. Findings on concrete learning outcomes were not strong enough; however, several studies revealed that suggested models influenced student satisfaction and success. Current trends, potential research gaps and implications were discussed.     

Percutaneous large-core biopsy of papillary breast lesions

Neisseria meningitidis, Haemophilus influenzae, and Streptococcus pneumoniae possess the ability to cleave human IgA1 antibodies, and all successfully colonize and occasionally invade the human upper respiratory tract. N. meningitidis invades the bloodstream after a period of nasopharyngeal colonization. We directly compared levels of IgA1 protease activity in strains (n=52) derived from the cerebrospinal fluid or blood of patients with meningococcal disease with strains of N. meningitidis obtained from asymptomatic carriers (n=25). IgA1 protease activity was determined by a sensitive semiquantitative ELISA assay. Levels of IgA1 protease activity were significantly higher (P<0.0001) in strains associated with invasive meningococcal disease (98% with detectable activity, mean = 580 mU) than with those obtained from asymptomatic carriers (76% with detectable activity, mean = 280 mU). Despite marked variation in enzyme activity, almost all strains (96%) possessed the gene for IgA1 protease. Given the panmictic population structure of the bacterial isolates investigated, these data, obtained from two groups infected with N. meningitidis, but with markedly different clinical outcomes, provide the first quantitative evidence that IgA1 protease activity is a virulence determinant that contributes to the pathogenic phenotype, and suggest IgA1 protease as a potential target for prophylaxis.     

Adsorption of an anionic dispersant on lignite

Since coal is not a homogeneous substance but a mixture of carbonaceous materials and mineral matter, it has a variety of surface properties. Therefore, it is not easy to control the properties of coal suspensions by simply adjusting variables, such as pH and/or electrolyte. A chemical agent needs to be added to control the properties of the coal suspensions. The aim of this investigation is to determine the adsorption behavior of an anionic dispersant in the presence of a wetting agent using some Turkish lignite samples. The presence of a wetting agent in the dispersant adsorption behavior is important, since usage of a wetting agent in the preparation of coal–water slurries which are acceptable for potential industrial users is of great importance. The effects of dispersant concentration, temperature and pH on the dispersant adsorption were studied systematically, and the experimental results are presented. Pellupur B69 as a dispersant, commercial mixture of formaldehyde condensate sodium salt of naphthalene sulphonic acid, and Texapon N25 as a wetting agent, a sodium lauryl ether sulfate, have been used.     

Vascular infections: medical and surgical therapies

Vascular infections are a serious problem, often associated with high morbidity and mortality. This article reviews the etiology, pathophysiology, risk factors, and treatment of surgical wound infections, prosthetic graft infections, aortoenteric fistulas (AEFs), and infected vascular ulcers. The primary cause of surgical wound infections is contamination by skin organisms during surgery. Prosthetic graft infections typically result from a progressive wound infection. Comorbid conditions are also related to vascular infections. Nurses should identify vascular patients at increased risk for infection, monitor them closely, and intervene to optimize the healing environment.     

DESORPTION OF ETHYL ACETATE-WATER MIXTURE BY USING CROSS-LINKED POLY(VINYLALCOHOL) MEMBRANE AND COMPARISON OF RESULTS WITH PERVAPORATION

In this study using poly(vinylalcohol) (PVOH) membranes cross-linked with tartaric acid (Tac) desorption experiments were performed for selected concentrations of binary ethyl acetate (EtAc)-water mixture at temperatures of 30°, 40°, and 50°C to determine sorption of components. Sorption values measured were compared with those estimated by the Flory-Huggins approach. Additionally, desorption results were compared with pervaporation results of another study in terms of solution-diffusion theory, and the effect of thermodynamic interactions on selective transport of the binary mixture and membrane system was investigated. The results obtained show that selective transport of EtAc-water mixture was influenced by increasing temperature and water content in the feed. It is shown that preferential sorption is more effective for pervaporation selectivity than diffusion selectivity.