Carbon molecular sieve films produced by dc sputtering

This paper reports adsorption measurements that show molecular sieve effects in amorphous hydrogenated carbon (a-C : H) films deposited by d.c. magnetron discharge decomposition of acetylene. Adsorption of organic gases on the films is studied by using a quartz crystal microbalance technique. The sieve effect in this material depends on both deposition and annealing conditions. Films having significant molecular sieve effects are found to be typically microporous and to have a very small characteristic micropore dimension. It is suggested that the d.c. sputtered a-C : H film may be useful as a molecular sieve material in selective adsorption and gas permeation studies.     

一种由WiFi智能插座构成的智能家届

本文首先叙述了智能家居的基本概念以及分析了智能家居中的通信技术,分析了WiFi技术在智能家居中的应用优势。接着讨论了串口WiFi的功能,以WiFi插座为例,描述了串口WiFi在智能家居中的具体应用。最后叙述了基于WiFi技术的智能家居系统。     

基于STM32的步行者航位推算装置设计

基于便携性与实用性考虑,提出一种新的步行者航位推算装置设计。使用三维加速度计与电子罗盘集成芯片LSM303DLHC和陀螺仪集成芯片MPU3050对步行者的实时运动信息进行采集,采用具有ARM Cortex-M3内核的STM32F103RBT6单片机收集传感器数据并对数据进行航位推算处理,将步行者航迹信息显示于TFTLCD上。实验证明,该装置具有较高的推算精度,能满足实际应用需求。     

SPCE061A与AD9851的低频可控信号发生器

基于DDS直接数字频率合成技术原理,采用凌阳SPCE061A单片机作为人机界面控制单元和参数形成处理单元,首先以一片AD9851芯片为核心产生频率在10Hz~30 MHz可调、幅度稳定的正弦波、方波和三角波信号,然后通过一路可控模拟开关(使用AD7502芯片)选择波形输出。再通过外接键盘按键控制输出频率及频率步进,并通过LCD显示输出波类型、频率及电压幅度。该系统除具有基本函数信号发生器的主要功能外,还可控制输出频率在10Hz~1MHz之间变化的波型信号,同时还能够保障输出电平满足Vpp=(0~5V)±0.1V。在输出为50Ω负载的条件下,可实现频率在10Hz~1kHz范围内步进10Hz,在10kHz~1MHz范围内步进1kHz。在实验教学、生产等应用中,有一定的使用和推广价值。     

策应鄱阳湖生态经济区建设 推动吉安进位赶超绿色崛起

建设鄱阳湖生态经济区是国家从战略全局和长远发展出发作出的一项重大决策。如何主动策应鄱阳湖生态经济区建设,推动吉安进位赶超、跨越发展,是摆在我们各级政府和科技部门面前一项亟待解决的问题。为此,一是要提高认识,统一思想,切实增强策应规划的使命感和责任感;二是要结合实际,突出重点,全面对接鄱阳湖生态经济区规划;三是要加强领导,落实措施,确保吉安进位赶超、绿色崛起取得明显成效。     

新自由主义中的政府与市场理论述评

作为凯恩斯主义的反对者,新自由主义以抵制政府干涉,提倡自由市场竞争的面目出现,在一定程度上被看做是对古典自由主义的复辟,但它绝不仅仅是对古典"放任自由"的一种简单继承。对新自由主义主流学派关于政府与市场理论进行考察,理清新自由主义理论思想,从而对其有一个更客观的认识和评价。     

Preparation and characterization of polyelectrolyte copolymers containing methyl methacrylate and 2-hydroxyethyl methacrylate. I. Polymers based on methacrylic acid

Acidic polyelectrolyte copolymers containing 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were prepared by free radical polymerization to high conversion in solution. Copolymer yields were obtained by gravimetry (all in the 30–50% range), relative molecular weights estimated by intrinsic viscosity measurements (all in the 50–70 cc/g range), tacticity by ¹³C nuclear magnetic resonance (NMR) spectroscopy (all polymers predominantly syndiotactic with some atactic content), and composition by acid/base titrations in conjunction with ¹H-NMR spectroscopy (all close to the monomer charge ratios). Acid strengths or apparent pKa's were examined as a function of extent of ionization. Measurements performed in water indicated that the compact/extended coil transformation in predominantly syndiotactic polymethacrylic acid occurs also in copolymers of similar tacticity containing moderate to high concentrations of MAA. The apparent pKa of such polymers containing only small amounts of MAA did not vary with extent of ionization, indicating a low degree of interaction between the acid groups. In copolymer pairs containing similar amounts of MAA but differing HEMA and MMA contents, the polymer containing more HEMA appeared the stronger acid, presumably due to a better solvation of that polymer which would increase the net spatial charge–charge separation and decrease cooperative effects that lead to suppressed ionization.     

An automatic 2D to 3D video conversion approach based on RGB-D images

3D movies/videos have become increasingly popular in the market; however, they are usually produced by professionals. This paper presents a new technique for the automatic conversion of 2D to 3D video based on RGB-D sensors, which can be easily conducted by ordinary users. To generate a 3D image, one approach is to combine the original 2D color image and its corresponding depth map together to perform depth image-based rendering (DIBR). An RGB-D sensor is one of the inexpensive ways to capture an image and its corresponding depth map. The quality of the depth map and the DIBR algorithm are crucial to this process. Our approach is twofold. First, the depth maps captured directly by RGB-D sensors are generally of poor quality because there are many regions missing depth information, especially near the edges of objects. This paper proposes a new RGB-D sensor based depth map inpainting method that divides the regions with missing depths into interior holes and border holes. Different schemes are used to inpaint the different types of holes. Second, an improved hole filling approach for DIBR is proposed to synthesize the 3D images by using the corresponding color images and the inpainted depth maps. Extensive experiments were conducted on different evaluation datasets. The results show the effectiveness of our method.

     

一种基于分段偏最小二乘模型的土壤重金属遥感反演方法

土壤中重金属由于其毒性而成为最有害的环境污染物之一,利用遥感进行土壤重金属检测和分布制图是目前最为高效的手段。采用哨兵二号（Sentinel-2）多光谱影像与实测样品光谱数据,对山西省铜矿峪铜矿尾矿库及其周边农田土壤的铜（Cu）含量进行估算,利用68个土壤样品的反射光谱,优选出适合土壤铜含量预测的波段,结合分段偏最小二乘法（Piecewise Partial Least Squares Regression,P-PLSR）,对土壤铜含量进行估算,将模型用于Sentinel-2影像获得了Cu含量的空间分布。通过P-PLSR对实测样品光谱建模反演Cu含量的决定系数（R²）为0.89,预测偏差比（RPD）为2.82;利用Sentinel-2多光谱影像获得了该区域Cu元素含量空间分布,其Cu含量的估算精度R²为0.74,RPD为1.73,Cu含量高值区空间分布与尾矿库关系密切。Sentinel-2多光谱数据具有高空间分辨率（10、20和60 m）、高时间分辨率和幅宽大（290 km）等优势,通过敏感波段选择并建立反演模型,可实现大范围土壤环境制图。     

LogGAN: a Log-level Generative Adversarial Network for Anomaly Detection using Permutation Event Modeling

Information Systems Frontiers - System logs that trace system states and record valuable events comprise a significant component of any computer system in our daily life. Each log contains...