固相萃取净化-气相色谱-质谱法测定染料中7种指示性多氯联苯

本文建立了以固相萃取(SPE)前处理净化、结合气相色谱-质谱(GC-MS)测定染料中7种指示性多氯联苯的分析方法。该法将染料样品经溶剂萃取后,通过固相萃取(SPE)净化、浓缩,气相色谱-质谱采用选择离子监测模式(SIM)测定,以保留时间和特征离子定性,外标法定量。     

薄板坯连铸浸入式水口结构数值模拟

使用有限元计算方法开展薄板坯连铸浸入式水口流场的研究 ,分别对水口不同浸入深度的流场分布、水口出口不同角度的流场分布进行计算。结果发现 :水口的浸入深度在 30 0mm时较为合理 ;水口的出口角度以R1 5、60°、45°为宜     

蓝色料生产的技术与应用

对蓝色玻璃着色方法进行分类。对用氧化钴粉实施绿色料换蓝色料,根据生产实践总结经验,对换料的工艺细节做了介绍。     

对苯二甲酸加氢精制的反应规律

在高压磁力搅拌间歇反应釜中研究了粗对苯二甲酸在 Pd- C催化剂上加氢精制反应的规律。实验温度范围为 2 75～ 2 95℃ ,实验压力范围为 6 .0 8～ 8.0 8MPa(表压 )。研究发现加氢反应速率随着催化剂量和氢分压的增加而提高 ,在实验温度范围内 ,提高加氢温度 ,反应速率反而有所下降 ;投料中对苯二甲酸的质量浓度对反应速率也有一定影响 ,在 2 82℃反应条件下合适的质量分数为 2 5 %。     

烟草浸出液防治菜青虫及对蔬菜品质的影响

用四种不同浓度烟草浸出液防治菜青虫，与40％乐果比较。试验结果表明2倍液防治效果最好。杀虫率平均迭87．5％。以清水为对照。采用问接萃取比色法。做出烟碱的标准工作曲线。喷药24、48、72h后采集样品。测定其残留，4种浓度的残留均未检出。同时进行蔬菜生理指数的测定，结果显示喷药后叶绿素的含量显著增多。维生素C含量变化明显。     

动态固化聚丙烯/马来酸酐接枝三元乙丙橡胶/环氧树脂共混物

将动态固化法成功地应用于聚丙烯／环氧树脂共混体系中，加入马来酸酐接枝三元乙丙橡胶后不仅增加了聚丙烯／环氧树脂共混体系的相容性，而且提高了聚丙烯基质的韧性。固化的环氧树脂颗粒提高了聚丙烯基质的刚性。动态固化聚丙烯／马来酸酐接枝三元乙丙橡胶／环氧树脂共混物的刚性和韧性达到了很好的平衡。     

中氮肥煤造气技术改造调查与评述（上）

重点调查了９０年代以来，全国以煤焦为原料的中氮厂造气工序技术改造的基本情况，对技术改造的效果和存在的问题作了全面的评述，为各企业技术改造提供了一份可借鉴和参考的资料     

A kinetic study on medium temperature desulfurization using a natural manganese ore

Natural manganese ores were selected as raw materials for the desulfurization sorbent because of economical efficiency and high reactivity on hydrogen sulfide. Initial reaction rates between H₂S and desulfurization sorbent of natural manganese ores were determined in a temperature range of 400-800°C using a thermobalance reactor. All reactions were first order with respect to H₂S and were expressed by the Arrhenius relation. When the sulfidation reaction was controlled by diffusion, the temperature dependence of the effective diffusivity was given by the Arrhenius equation. Activation energies and frequency factors were obtained from the product layer diffusion coefficient of various sorbents by plotting as an Arrhenius equation form. Several additives were mixed to improve the sulfidation capacity, and NiO was the best additive.     

淤浆法HDPE装置低聚物不能结片原因探析

分析了淤浆法HDPE装置低聚物不能结片的原因,并提出了相应的工艺处理措施。     

Thermodynamic Calculation of the Zirconia–Calcia System

An optimal thermodynamic data set for the zirconia–calcia system is evaluated by the CALPHAD (CALculation of PHAse Diagrams) method applied to experimental phase diagram and thermodynamic data. The liquid and C _ss (cubic ZrO₂ solid solution) are described by a subregular solution model. Three compounds, CaZr₄O₉, Ca₆Zr₁₉O₄₄, and CaZrO₃, are modeled as stoichiometric compounds. A regular solution model is applied to the other phases. Comparisons between calculated and measured phase diagrams and thermodynamic quantities show that most of experimental information is satisfactorily accounted for by thermodynamic calculations. The calculations also reasonably predict the measured electromotive force concerning the metastable C _ss.