Inflammatory Molecules Associated with Ultraviolet Radiation-Mediated Skin Aging

Skin is the largest and most complex organ in the human body comprised of multiple layers with different types of cells. Different kinds of environmental stressors, for example, ultraviolet radiation (UVR), temperature, air pollutants, smoking, and diet, accelerate skin aging by stimulating inflammatory molecules. Skin aging caused by UVR is characterized by loss of elasticity, fine lines, wrinkles, reduced epidermal and dermal components, increased epidermal permeability, delayed wound healing, and approximately 90% of skin aging. These external factors can cause aging through reactive oxygen species (ROS)-mediated inflammation, as well as aged skin is a source of circulatory inflammatory molecules which accelerate skin aging and cause aging-related diseases. This review article focuses on the inflammatory pathways associated with UVR-mediated skin aging.     

Mechanical properties of friction stir butt welds of high nitrogen-containing austenitic stainless steel

In this study, the friction stir butt welding of 2-mm-thick high nitrogen-containing stainless steel (HNS; Ni-free austenitic stainless steel containing 1 mass% nitrogen) plates was performed using a load-controlled friction stir welding (FSW) machine with a Si₃N₄-based tool at various welding speeds, i.e., 50 mm/min, 100 mm/min, 200 mm/min and 300 mm/min, and a constant tool rotating speed of 400 rpm. To determine the optimum welding conditions to create reliable HNS FSW joints, the effect of the heat input on the mechanical properties of the HNS FSW joints was studied. The mechanical properties were evaluated by the Vickers hardness test and the tensile strength test. Full-penetrated and defect-free butt welded joints were successfully produced, under all the applied welding conditions. The stir zones consisted of very fine grained structures and showed an increase in the Vickers hardness. These joints also showed a higher tensile strength and yield strength than the base metal. In particular, the FSW welds obtained at a welding speed of 100 mm/min, which showed the best mechanical properties, had a relatively higher Vickers hardness, which indicates a good relationship between the welding parameter (heat input) and the hardness profile due to the microstructure refinements. It was estimated that these welding conditions were optimal, and under these conditions both grain growth and α-phase formation were prevented.     

Synthesis and characterization of lithium-carbon compounds for hydrogen storage

Three carbon materials were prepared for the synthesis of Li-C compounds, such as Li intercalated graphite. The materials were as-received high purity polycrystalline graphite (G), graphite milled under a hydrogen atmosphere (HG), and graphite milled an argon atmosphere (AG). With respect to the difference for them, HG preserved a better crystalline structure than AG. Each material was milled with Li, where the products are denoted as Li-G, Li-HG, and Li-AG. In XRD patterns of Li-G and Li-HG, the peaks corresponding to LiC₆ and LiC₁₂ were revealed, while no peaks were observed in the case of Li-AG. However, the formation of lithium carbide Li₂C₂ was suggested for Li-AG by a thermal analysis under an inert gas. After the hydrogenation, LiH was formed for all the compounds, and graphite was recovered for Li-G and Li-HG. Each hydrogenated compound desorbed H₂ with different profile by heating up to 500 °C. As a reaction product, Li₂C₂ was formed for the hydrogenated Li-HG and Li-AG. In the case of the hydrogenated Li-G with better crystalline structure, Li intercalated graphite were formed after the dehydrogenation. Therefore, it is concluded that the hydrogen absorption and desorption process of Li intercalated graphite was different from those of Li₂C₂.     

Study of electron irradiation-induced defects in and by electron spin resonance

Electron irradiation effects in CuInSe₂ and CuInGaSe₂ were investigated using electron spin resonance (ESR) method. ESR signal caused by electron irradiation was found in irradiated samples. The ESR spectra of irradiated samples were well reproduced by a computer simulation of powder spectrum assuming Cu²⁺ ion. Electron irradiation effects in CuInSe₂ and CuInGaSe₂ are discussed based on present ESR study together with previous deep level transient spectroscopy (DLTS) and Hall effect measurements.     

Design of a compact focusing lens system with short acceleration tube at 300 kV

A compact focusing lens system with high demagnification over 1500 was designed to form an ion nanobeam with 346 keV energy by adding a short distance acceleration tube for beam acceleration and focusing downstream of the existing double acceleration lens system. The demagnification, focusing points and aberrations of the acceleration tube were studied using beam trajectory calculation. The acceleration tube was designed to have a length of 140 mm and a demagnification of 2 at its acceleration tube voltage of 300 kV, which resulted in a new compact focusing lens system with a total length of about 640 mm. In addition, the maximum voltage and electric-field of the acceleration tube were confirmed experimentally on the built device to be 300 kV and 30 kV/cm, respectively. The final beam size formed by the system was estimated to be 130 nm in diameter using the design parameters. The result suggests that an ion nanobeam of 346 keV can be formed by an apparatus having the reasonable length of 2 m, which permits us to develop a system for 1 MV by elongating its tube length.     

Microbeam complex at TIARA: Technologies to meet a wide range of applications

Since 1990 R&Ds of microbeam technology has been progressed at the TIARA facility of JAEA Takasaki. In order to meet a wide variety of ion beam applications, analysis, radiation effect studies, or fabrication in regions of micro- or nano-structures, three different types of ion microbeam systems were developed. In these systems, high-spatial resolutions have been achieved and techniques of micro-PIXE, single ion hit and particle beam writing (PBW) were also developed for these applications. Microbeams, on the other hand, require the highest quality of beams from the accelerators, the cyclotron in particular, which was an important part of the microbeam technology of TIARA. In this paper, the latest progress of the ion microbeam technology and applications are summarized and a future prospect of them is discussed.     

Outgassing measurement of an LHC collimator and estimation for the NEG performances

The outgassing rate of the collimators in the Large Hadron Collider (LHC) at CERN has an important role for the life-time of the Non-Evaporable Getter (NEG), and an accurate analysis allows the definition of future activities, like NEG vacuum activation. For these reasons, both, total outgassing rate and gas composition of a secondary collimator have been measured in the laboratory. The outgassing rate decreases by about two orders of magnitude by after bake-out and moreover, repeated bake-out further reduced the outgassing rate. The gas transmission through the NEG coated beam pipes and the resulting pressure distributions near the collimator were also measured in a dedicated setup. It is found that the main gas component after just 2 m of NEG coated beam pipe is CH₄ due to the extreme pumping speed of NEG for the other gases. Large amount of outgassing for H₂ and carbon related molecules are released when moving the collimator jaws. It is found that the NEG is very effective even in such case with large gas load.     

Proteins and protein-rich biomass as environmentally friendly adsorbents selective for precious metal ions

Proteins exhibit specific interactions with various metal ions, which play important roles in a living cell. Here, we found that various proteins selectively adsorbed precious metal ions at a wide range of pH values. Studies on protein sequences and on synthesized peptides revealed that a histidine-containing sequence had specific interactions with precious metal ions (Au3+ and Pd2+). We then investigated a few types of protein-rich biomass as adsorbents for precious metal ions. In the presence of various transition metal ions, Au3+ and Pd2+ were also selectively adsorbed onto the biomass tested. The bound precious metal ions were recovered by aqua regia after charring the metal-bound biomass. Finally, we demonstrated the successful recovery of Au3+ and Pd2+ from a metal refining solution and a metal plating waste using the biomass. We propose an environmentally friendly recycling system for precious metal ions using protein-rich biomass.