Enhancement of heat and mass transfer in a plane channel with turbulizers on one of the walls

The effect of turbulizing asperities positioned on one of the walls of a plane channel on the intensity of exchange processes near a smooth wall with injection of different working media is studied experimentally. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 3, pp. 404–408, 1997.     

Effect of repositioning of rhodium direct-charge detectors in a RBMK-1000 reactor on fuel and emitter-material burnup coefficients

Scientific-Technical Center “Atomtekhénergo.” Leningrad Nuclear Power Plant. N. V. Sultanov Institute of Nuclear Reactors, Russian Scientific Center “Kurchatovskii institut.” Translated from Atomnaya énergiya, Vol. 76, No. 6, pp. 470–473, June, 1994.     

Analytical solution of a system of nonlinear measuring equations of a 12-pole microwave reflectometer

Analytical solution of a system of nonlinear measuring equations of a 12-pole microwave reflectometer was obtained. Criteria for selecting a true solution in the general case were developed and the analysis was conducted for a number of particular cases that may generate practical interest.     

Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.     

Structure Formation in Densely Sintered Household Ceramics

The formation specifics of the structure and phase composition of densely sintered ceramics based on a low-melting argillaceous material from Belarus together with a combined flux and a grog additive are investigated. The correlation between the physicochemical properties, structure, phase composition, and the time-temperature firing schedules of the developed materials are investigated. Electron probe microanalysis makes it possible to monitor variations in the chemical composition at various local sites and compare it with the estimated composition of the mixture. The optimum regimes for the heat treatment of articles are determined. __________ Translated from Steklo i Keramika, No. 6, pp. 32 – 36, June, 2005.     

Automatic ultrastructure segmentation of reconstructed cryoEM maps of icosahedral viruses.

We present an automatic algorithm to segment all the local and global asymmetric units of a three-dimensional density map of icosahedral viruses. This approach is readily applicable to the structural analysis of a broad range of virus structures that are reconstructed using cryo-electron microscopy (cryo-EM) technique. Our algorithm includes three major steps operating on the three dimensional density map: the detection of critical points of the volumetric density function, the detection of global and local symmetry axes, and, finally, the boundary segmentation of all the asymmetric units. We demonstrate the efficacy of our algorithm and report our results on several experimental volumetric datasets, consisting of both reconstructed cryo-EM molecular density maps taken from the European Bioinformatics Institute archive, as well our own synthetically generated (blurred) maps calculated from X-ray resolution molecular structural data taken from the Protein Data Bank.     

Preliminary<Emphasis Type="Italic">in vitro</Emphasis> and<Emphasis Type="Italic">in vivo</Emphasis> characterizations of a sol-gel derived bioactive glass-ceramic system

This study investigates quantitatively and qualitatively the sol-gel derived bioactive glass-ceramic system (BGS)—apatite-wollastonite (AW) type granules in the size range of 0.5–1 mm, as an effective graft material for bone augmentation and restoration. Scanning electron micrographs (SEM) of the sintered granules revealed the rough material surface with micropores in the range 10–30 μm. X-ray diffraction (XRD) pattern of the granules revealed the presence of crystalline phases of the hydroxyapatite and wollastonite, and the functional groups of the silicate and phosphates were identified by Fourier transform infrared spectroscopy (FT-IR). Thein vitro cell culture studies with L929 mouse fibroblast cell line showed very few cells adhered on the BGS disc after 24 h. This could be due to the highly reactive surface of the disc concomitant with the crystallization but not due to the cytotoxicity of the material, since the cellular viability (MTT assay) with the material was 80‰ Cytotoxicity and cytocompatibility studies proved that the material was non-toxic and biocompatible. After 12 weeks of implantation of the BGS granules in the tibia bone of New Zealand white rabbits, the granules were found to be well osteointegrated, as observed in the radiographs. Angiogram with barium sulphate and Indian ink after 12 weeks showed the presence of microcapillaries in the vicinity of the implant site implicating high vascularity. Gross observation of the implant site did not show any inflammation or necrosis. SEM of the implanted site after 24 weeks revealed good osteointegration of the material with the newly formed bone and host bone. New bone was also observed within the material, which was degrading. Histological evaluation of the bone healing with the BGS granules in the tibial defect at all time intervals was without inflammation or fibrous tissue encapsulation. After 2 weeks the new bone was observed as a trabeculae network around the granules, and by 6 weeks the defect was completely closed with immature woven bone. By 12 weeks mature woven bone was observed, and new immature woven bone was seen within the cracks of the granules. After 24 weeks the defect was completely healed with lamellar bone and the size of the granules decreased. Histomorphometrically the area percentage of new bone formed was 67.77% after 12 weeks and 63.37% after 24 weeks. Less bone formation after 24 weeks was due to an increased implant surface area contributed by the material degradation and active bone remodeling. The osteostimulative and osteoconductive potential of the BGS granules was established by tetracycline labelling of the mineralizing areas by 2 and 6 weeks. This sol-gel derived BGS granules proved to be bioactive and resorbable which in turn encouraged active bone formation.