Gas-Phase Treatment of Dump Tailings from Metallurgical Plants in Nitrating Media to Enhance Nickel Extraction

Theoretical Foundations of Chemical Engineering - A new approach to the processing of the dump waste product stored in the tailings dumps of the nickel production enterprise Punda Gourda (Cuba) has...     

Application of Granulometry for Rapid Assessment of the Performance Properties of Acid-Activated Sedimentary Rocks

Glass and Ceramics - The granulometric compositions of native and acid-activated rocks containing aluminosilicates are compared. It is shown that in water rocks gradually dissolve and the particle...     

Investigation of 12 – 15 Kev Electron Transmission Through Tapered Glass Capillaries

Glass and Ceramics - The results of experimental studies of the transmission of 12 and 15 keV electron beams through tapered glass macro-capillaries are presented. Measurements showed that there is...     

A Comparative Study on Open Circuit Voltage Models for Lithium-ion Batteries

The current research of state of charge(SoC) online estimation of lithium-ion battery(LiB) in electric vehicles(EVs)mainly focuses on adopting or improving of battery models and estimation filters. However, little attention has been paid to the accuracy of various open circuit voltage(OCV) models for correcting the SoC with aid of the ampere-hour counting method. This paper presents a comprehensive comparison study on eighteen OCV models which cover the majority of models used in literature. The low-current OCV tests are conducted on the typical commercial LiFePO_4/graphite(LFP) and LiNiMnCoO_2/graphite(NMC) cells to obtain the experimental OCV-SoC curves at different ambient temperature and aging stages. With selected OCV and SoC points from experimental OCV-SoC curves, the parameters of each OCV model are determined by curve fitting toolbox of MATLAB 2013. Then the fitting OCV-SoC curves based on diversified OCV models are also obtained. The indicator of root-mean-square error(RMSE) between the experimental data and fitted data is selected to evaluate the adaptabilities of these OCV models for their main features, advantages,and limitations. The sensitivities of OCV models to ambient temperatures, aging stages, numbers of data points,and SoC regions are studied for both NMC and LFP cells. Furthermore, the influences of these models on SoC estimation are discussed. Through a comprehensive comparison and analysis on OCV models, some recommendations in selecting OCV models for both NMC and LFP cells are given.     

Producing Polydicyclopentadiene from Lower-Grade Dicyclopentadiene

Russian Engineering Research - Polymer samples based on polydicyclopentadiene produced from Russian dicyclopentadiene are investigated by thermogravimetric analysis and differential scanning...     

Modified Pechini Synthesis of Proton‐Conducting Ba(Ce,Ti)O3 and Comparative Studies of the Effects of Acceptors on its Structure,Stability, Sinterability,and Conductivity

The phase structure, chemical stability, sinterability, and electrical performance of the proton‐conducting Ba(Ce,Ti)O₃ solid solution with a series of acceptors M (M = In, Y, Sm) synthesized by a modified Pechini method were systematically investigated. The substitution of cerium with titanium was proved as an effective way to improve the stability of BaCeO₃. Especially for the BaCe_0.95Ti_0.05O_3?δ sample doped with In, no change in the phase was found even after treatment in the atmosphere containing both CO₂ and H₂O at 700°C for 10 h. Thanks to the highly sinteractive powders with particle size of ~100 nm, dense ceramics were easily acquired. Moreover, compared with the undoped BaCe_0.95Ti_0.05O₃ sample, In, Y, and Sm dopants further improved the sinterability of the solid solution. In particular, In played a role of sintering aid and led to the largest linear shrinkage of the ceramics. As to the electrical performance, the transport properties of the samples under various atmospheres were analyzed and compared. The impedance tests demonstrated the best electrical performance of the Y‐doped samples.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

混合溶剂芳脂比与特定温度下密度的关系

为提高生产效率、降低生产成本、快速判断混合溶剂芳脂比,研究了混合溶剂芳脂比与特定温度下密度的关系。实验结果表明,混合溶剂的芳脂比与其特定温度下的密度之间存在明显线性关系,且该线性关系对生产具有指导意义。     

Alkaline activation of coals and carbon-base materials

Data on the reactions and processes occurring under the conditions of the alkaline activation of carbon substances—the production of activated carbons by the thermolysis of carbon substances in the presence of alkali metal hydroxides MOH—are summarized. The following most important activation processes were recognized: (1) the interaction of functional groups with MOH and the formation of intermediate structures with the C-O-M group; (2) their conversion into metal-containing compounds (primarily, M₂CO₃ and M₂O) in reactions with carbon, especially, with terminal C atoms on the periphery of graphenes; and (3) the reduction of M₂CO₃ and M₂O to the metal M, which is intercalated into the interlayer spaces of crystallites. The mechanism of alkaline activation was studied in most detail for KOH as an activating agent. The thermally initiated reduction of potassium oxide with carbon and the intercalation of potassium metal are the two most important processes for the development of the microporosity of activated carbon.     

降低介耗 提高精煤产率

针对河南禹州地区煤质煤泥含量高、浮选精煤粒度组成过细、细粒级颗粒偏多等极难选特征,为了优化极难选高细泥含量原煤洗选加工工艺、提高精煤产率、降低介耗,河南永锦选煤有限公司通过应用3GDMC1100/780AI型无压给料三产品重介旋流器,采取提高精煤产率措施与降低介耗途径,实现精煤产率提高2%,原煤介耗由2.5 kg/t降至1.21 kg/t,降低了材料消耗,增加经济收益1 347万元。