一种航空深弹安定器的CFD优化设计

静稳定性是航空深弹稳定飞行的先决条件,某对称配置的航空深弹静稳设计主要通过调整安定器的外形和相对位置实现。利用CFD方法研究某航空深弹在各种安定器外形参数条件下的流体动力参数,优化在总体接口条件限制下最可能实现的安定器外形设计。通过使用Fluent软件计算结果与试验结果的比较,认为此计算结果可信。     

Exif数据格式浅析及其读取应用

照片中镶嵌着丰富的Exif信息,从中可提取出拍摄位置与时间等实用数据服务于我们的工作与生活。本文分析了Exif数据格式,介绍了其读取方法,总结了Exif信息提取算法。结合具体实例,进行测试验证,对日常手机定位精度情况进行了评估。最后,通过生产实践,验证Exif信息对于提高测绘与地理信息单位的作业效率与质量控制的促进作用,同时对应用前景进行了展望。     

基于SVM和能量最小化的PolSAR图像分类方法

极化合成孔径雷达(PolSAR)采用全极化的工作方式可以获取地物的多种特征,利用这些特征对地物进行分类是PolSAR图像的重要应用方向。不同的特征和分类器对分类精度有着较大的影响。提出了一种基于支持向量机(SVM)和能量最小化(EM)的极化SAR图像地物分类方法。该方法选择基于6种散射模型的分解方法(6SD)所得的6部分散射能量、总散射能量span和3个极化相干矩阵旋转域角参数作为SVM的输入,得到图像分类结果,并使用基于图割的能量最小化算法α-expansion对分类结果进行优化。最后使用AIRSAR系统获得的Flevoland地区的数据进行实验,结果表明所提算法可以提高总体分类精度,总体分类精度为95.6%,高于其他方法的92.3%。所提算法可以较大幅度地提高散射机理明显的区域,如建筑、森林、水域、草地等区域的分类精度。另外,结合EM优化结果可以提高所有种类的分类精度,其中在苜蓿、小麦1、小麦2、裸地、草地、油菜籽等区域的分类精度可提高1%以上。     

Structure and electrochemical properties of titanate perovskite with in situ exsolution as a ceramic electrode material

Journal of Electroceramics - In this work, the structure and electrochemical properties of titanate ceramics with in situ Ni exsolution are investigated to identify the structure-performance...     

Analysis of Methods for Parallel Operation of Frequency Converters

Consideration is given to methods for the parallel operation of frequency converters by applying the active load division. The simulation model of the converter is presented. It consists of three parallel independent modules. A new principle of constructing individual modules of a frequency converter and the principle of their communication interface exhibiting resistance to destabilizing effects and allowing safe operation under nominal conditions even with a 5- to 10% range in time and amplitude values of pilot signals are developed.     

The Effect of Energy-Supply and Performance Indicators on the Performance of Traction-Resource Management Centers

Russian Electrical Engineering - This paper presents the results of a study of the effect of the characteristics of the traction power-supply system on the indicator of the energy supply of...     

The potential use of <Emphasis Type="Italic">Fabaceae</Emphasis> lianas fibers in papermaking

The objective of this study was to anatomically characterize the fibers of nine species of Fabaceae lianas, to determine their potential in papermaking and to define which biometric parameters can be used to distinguish and identify individuals. The species presented average values of 76.81, 57.45, 42.55, and 1.81 for the felting index, wall fraction, coefficient of flexibility, and Runkel index, respectively. It is concluded that only M. ferox and M. madeirense can be recommended for papermaking.     

The impact of natural and artificial weathering on the visual,colour and structural changes of seven tropical woods

This study investigates the effects of wood weathering on changes in its macroscopic and colour characteristics in connection with changes in its molecular and anatomical structure. Seven hardwoods suitable for outdoor architecture—bangkirai, cumaru, cumaru rosa, ipé, jatobá, kusia, and massaranduba—were exposed to the exterior out of ground contact for 1–36 months according to EN 927-3, and for 1–12 weeks in Xenotest with water spraying according to partly modified EN 927-6. With prolonged weathering, the following changes occurred in the top surfaces of all tropical woods: (1) visual—creation of longitudinal macro-cracks, (2) spectrophotometry and CIE-L ^? a ^? b ^? —darkening in exterior exposure mainly due to pollutants, except for ipé, and vice versa lightening in Xenotest, as well as greening and blueing in both modes of exposure, (3) FTIR—faster decrease of guaiacyl than syringyl lignin, absolute decrease of conjugated and unconjugated carbonyl groups in the newly formed lignin-polysaccharide-extractive substrate in the photo-oxidized and washed-out cell walls, and decrease of cellulose crystallinity, (4) SEM—damaging of cell-walls by micro-cracks, and their degradation by thinning. Connections between changes of the individual characteristics of weathered woods, for example, between the colour (ΔE*, etc.) and the molecular structure (carbonyls, etc.), were also determined.