完全隐藏策略的基于属性可搜索加密方案

目前的基于属性可搜索加密方案（ATT-PEKS）,虽然解决了关键词密文只能被唯一用户搜索的限制,实现了加密数据的多用户共享,但是却没有隐藏访问策略,访问策略一旦被不好奇且不可信赖的服务器攻击者获取到,可能会造成机密信息的泄露。所以,为了解决此问题,提出了完全隐藏策略的基于属性可搜索加密方案,并给出了具体的算法构造,使得方案不仅具有多用户数据共享的优势,还实现了访问策略的完全隐藏。并对此方案进行了安全性以及性能分析,证明了方案具有在属性集合模型下的抗攻击性安全,还能保证索引和关键词明文的机密性。在性能方面使用较少的运算量就可实现隐藏访问策略和加密数据共享两大功能。     

基于遗传算法优化的OCSVM双轮廓模型异常检测算法

针对Modbus工业总线协议的特殊性及工控数据样本的不均衡性,利用单类支持向量机（OCSVM）分别构建正常OCSVM模型和异常OCSVM模型,即双轮廓模态来模拟系统通信的正常模式和异常模式,从而实现工控系统异常检测。同时将遗传算法优化自变量降维应用于工控网络入侵检测场景,实现对输入自变量的降维压缩处理,防止OCSVM模型出现过拟合现象及分类准确率低的问题,提高异常检测的精度,缩减建模时间。通过仿真验证了该算法对工控网络异常检测的有效性。     

PbNb2O6基压电陶瓷的高温介电性能研究

本文在PbNb2O6基础上采用Ba^2＋取代Pb^2＋离子,并通过添加Cr2O3、Y2O3、Sm2O3、Nd2O3和CeO2等氧化物进行掺杂改性,研究不同掺杂剂对PbNb2O6陶瓷材料结构的影响,寻找提高压电性能及居里温度的途径.试验结果表明,掺杂后的偏铌酸铅显微结构发生了变化,适量的掺杂可获得压电性能和工艺稳定性能很好,且居里温度较高（420℃～600℃）的改性PbNb2O6系压电陶瓷,可分别满足350℃和500℃以上高温应用环境的要求.     

CaO–ZrO2 Solid Solution: A Highly Stable Catalyst for the Synthesis of Dimethyl Carbonate from Propylene Carbonate and Methanol

CaO–ZrO₂ prepared by co-precipitation showed to be a well-performed catalyst for the transesterification of propylene carbonate (PC) and methanol. The characterization by X-ray powered diffraction (XRD) and Raman spectroscopy indicated that CaO was doped into the lattice of ZrO₂ to form CaO–ZrO₂ solid solution. Such a solid solution was a strong solid base, which was proved by CO₂ temperature program desorption (CO₂-TPD). As a result, the catalyst showed high stability towards the transesterification of propylene carbonate and methanol into dimethyl carbonate with high PC conversion, especially being subjected to the continuous production of dimethyl carbonate at reactive distillation reactor for 250 h without any obvious loss of activity at the PC conversion of 95%.     

Nickel foam and carbon felt applications for sodium polysulfide/bromine redox flow battery electrodes

The first use of nickel foam (NF) as electrocatalytic negative electrode in a polysulfide/bromine battery (PSB) is described. The performance of a PSB employing NF and polyacrylonitrile (PAN)-based carbon felt (CF) as negative and positive electrode materials, respectively, was evaluated by constant current charge-discharge tests in a single cell. Charge/discharge curves of the cell, positive and negative electrodes show that the rapid fall in cell voltage is due to the drop of positive potential caused by depletion of Br₂ dissolved in the catholyte at the end of discharge. Cell voltage efficiency was limited by the relatively high internal ohmic resistance drop (iR drop). Polarization curves indicated that both NF and CF have excellent catalytic activity for the positive and negative redox reactions of PSB. The average energy efficiency of the single cell designed in this work could be as high as 77.2% at 40 mA cm⁻² during 48 charge-discharge cycles.     

Fabrication and amplification of Rhodamine B‐doped step‐index polymer optical fiber

A step‐index polymer optical fiber (SI POF) containing Rhodamine B in poly(methyl methacrylate) (PMMA) has been fabricated by a preform technique. Fluorescence of different fiber lengths were observed and discussed. A high gain (23 dB) for a SI POF with 60‐cm length, 400‐μm diameter was obtained. The Rhodamine B content of the doped SI POF is 5 ppm‐wt. The signal wavelength providing the highest gain for a 60 cm SI POF is around 630 nm, and the optimum fiber length is about 60 cm at 10 kW launched pump power. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 681–685, 2004     

对辊式造粒机的设计与应用

对辊式造粒机用来生产复混肥 ,采用无干燥工艺流程 ,常温生产 ,产品一次成型 ,工艺设计合理、技术可行。既可生产低、中、高浓度复混肥料 ,也可生产单质颗粒磷肥 ,大颗粒碳铵等多品种肥料     

真空辅助成型工艺(VARI)研究

VARI在低成本成型工艺中起着很重要的作用，本文将介绍它的特点、制造、性能以及在国内外的应用。     

碱金属热管轴向传热极限的研究

通过钠热管测试过程中的实验现象，分析研究热管轴向传热率受粘性传热极限、声速传热极限、毛细力传热极限的限制。给出各种传热极限时的壁温分布曲线，并将实验的传热率值与理论值进行比较。最后对实验过程中未发现携带传热极限进行了详细的分析。     

Effects of the electrospray ionization parameters on the formation and morphology of colloidal microspheres of polyacrylonitrile

Polyacrylonitrile colloidal microspheres have been successfully prepared with different concentrations of electrospraying polyacrylonitrile solutions. The morphology of the colloidal spheres has two kinds of structures and is strongly affected by electrospray‐ionization parameters, such as the polymer concentration, applied voltage, and distance between the electrodes. The solvent can also affect the morphology of polyacrylonitrile. The optimum conditions for preparing colloidal spheres have been found, and differential scanning calorimetry results indicate that polyacrylonitrile colloid spheres are amorphous. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2889–2893, 2006