A novel quarter‐wave retardation film for improving viewing angle properties in time‐sequential stereoscopic 3D‐LCDs

We have successfully developed a quarter‐wave retardation film (QWF) for wide viewing angle 3D liquid crystal displays (3D‐LCDs) that provides high luminance, low crosstalk, low color change, and low head‐tilt‐angle dependency. It was found that the out‐of‐plane retardation (Rth) of the QWF in the LCD needs to be close to 0 nm in order to improve the 3D display properties at an off‐axis position and that the in‐plane retardation (Re) needs to be adjusted from 120 to 130 nm to achieve low color change with head tilting. We adopted a coating process for making our QWF because of its potential for retardation control. 3D‐LCDs with this QWF whose Rth was nearly zero had high performance and allowed off‐axis other than on‐axis.     

Effect of in-flight particle behavior on the morphology of flame sprayed Er2O3 splats

The morphology and microstructure of splats impact the comprehensive capability of a new coating methodology called chelate flame spraying (CFS). This study addresses the quantitative characterization of the spread morphologies of flame sprayed Er₂O₃ splats directly deposited under different spray conditions on aluminum alloy substrates with a mirror finish. The influence of the in-flight particle temperature and velocity, carrier gas type, and carrier gas ratio on the solidification mechanism of molten droplets was investigated. Image analysis methods were employed to identify single splats from the morphology observed with field-emission scanning electron microscopy (FE-SEM). In addition, Er₂O₃ films were synthesized on an Al–Mg alloy (A5052) substrate using N₂ or O₂ as the carrier gas. When O₂ was used as the carrier gas, 109-μm-thick films were deposited on the A5052 substrate. The cross-sectional porosity of the films was 3.8%. In contrast, films with 101-μm thickness were synthesized on the A5052 substrate when N₂ was used as the carrier gas. The cross-sectional porosity of these films was 13.8%. The results showed that the carrier gas type (N₂) and carrier gas ratio had a significant effect on the flattening behavior of the molten droplets. A spraying method combined with multidimensional modes is proposed to control the morphology of the splats.     

Cytoskeletal Protein 4.1G Is Essential for the Primary Ciliogenesis and Osteoblast Differentiation in Bone Formation

The primary cilium is a hair-like immotile organelle with specific membrane receptors, including the receptor of Hedgehog signaling, smoothened. The cilium organized in preosteoblasts promotes differentiation of the cells into osteoblasts (osteoblast differentiation) by mediating Hedgehog signaling to achieve bone formation. Notably, 4.1G is a plasma membrane-associated cytoskeletal protein that plays essential roles in various tissues, including the peripheral nervous system, testis, and retina. However, its function in the bone remains unexplored. In this study, we identified 4.1G expression in the bone. We found that, in the 4.1G-knockout mice, calcium deposits and primary cilium formation were suppressed in the trabecular bone, which is preosteoblast-rich region of the newborn tibia, indicating that 4.1G is a prerequisite for osteoblast differentiation by organizing the primary cilia in preosteoblasts. Next, we found that the primary cilium was elongated in the differentiating mouse preosteoblast cell line MC3T3-E1, whereas the knockdown of 4.1G suppressed its elongation. Moreover, 4.1G-knockdown suppressed the induction of the cilia-mediated Hedgehog signaling and subsequent osteoblast differentiation. These results demonstrate a new regulatory mechanism of 4.1G in bone formation that promotes the primary ciliogenesis in the differentiating preosteoblasts and induction of cilia-mediated osteoblast differentiation, resulting in bone formation at the newborn stage.     

Analysis of Plasmalogen Species in Foodstuffs

Ethanolamine plasmalogen (PlsEtn), which is present at high levels in brains, is believed to be involved in neuronal protection. The present study was performed to search for PlsEtn resources in foodstuffs. The foodstuffs examined showed a wide range of PlsEtn contents from 5 to 549 μmol/100 g wet wt. The marine invertebrates, blue mussel, and ascidian had high PlsEtn contents (over 200 μmol/100 g wet wt). Profiling of the molecular species showed that the predominant fatty acids of PlsEtn species were 20:5 (EPA) and 22:6 (DHA) at the sn‐2 position of the glycerol moiety in marine foodstuffs, whereas major PlsEtn species in land foodstuffs were 20:4. Following quantitative analysis by multiple reaction monitoring, the ascidian viscera were shown to contain the highest levels of 18:0/20:5‐PlsEtn and 18:0/22:6‐PlsEtn (86 and 68 μmol/100 g wet wt, respectively). In order to evaluate a neuronal antiapoptotic effect of these PlsEtn species, human neuroblastoma SH‐SY5Y cells were treated with ethanolamine glycerophospholipid (EtnGpl), purified from the ascidian viscera, under serum starvation conditions. Extrinsic EtnGpl from ascidian viscera showed stronger suppression of cell death induced by serum starvation than with bovine brain EtnGpl. The EtnGpl from ascidian viscera strongly suppressed the activation of caspase 3. These results suggest that PlsEtn, especially that containing EPA and DHA, from marine foodstuffs is potentially useful for a therapeutic dietary supplement preventing neurodegenerative diseases, such as Alzheimer's disease (AD).     

Photonic bandgap fibers with high birefringence

A highly birefringent air-guiding photonic crystal fiber which provides guidance by a full two-dimensional photonic bandgap (PBG) effect is proposed. The fiber core is formed by introducing a large air hole that has an area of four unit cells of the cladding materials. It is shown from computed results by a full-vector finite element method that the proposed PBG fiber has birefringence of the order of 10/sup -3/.     

Transverse Acoustic Response Measured by AC-cut Quartz Transducer in Superfluid Helium-3

No Heading The transverse acoustic response in the B phase of superfluid ³He has been measured using an AC-cut quartz transducer at a pressure of 17.0 bar. The measurements were performed by a CW bridge method at a frequency of 9.3 MHz utilizing a quadrature hybrid and a high-frequency lock-in amplifier. By sweeping frequency around the resonance frequency of the transducer, in-phase and quadrature responses of the resonance were obtained from the output of the lock-in amplifier. We successfully separated the quality factor and the resonance frequency. Quality factor of the transducer had a small dip just below T_c and increased as _n by cooling, while its resonance frequency decreased sharply at T_c and gradually recovered to the normal state value in the low temperature limit.PACS numbers: 67.57.Jj, 43.58.+z.     

Decolorization of beads-milled TiO2 nanoparticles suspension in an organic solvent

In this paper, a new method is proposed for the decolorization of a yellow-hued suspension of rutile TiO₂ nanoparticles in an organic solvent (diethylene glycol dimethylether). The presence of color has always been undesirable in a suspension of nanoparticles filler used for industrial needs, particularly for optical applications.A colorless suspension was achieved by irradiating well-dispersed TiO₂ nanoparticles in an organic solvent with UV-light (λ = 254 nm) for 5 h. TiO₂ nanoparticles of 1 and 5 wt.% were dispersed using a beads mill method. Trimethoxytrifluor(propyl) silane was used as a dispersant to achieve stability. The effect of the UV-light irradiation on the TiO₂ nanosuspension was investigated by means of a Fourier transform nuclear magnetic resonance analyzer (FT-NMR). The dispersant was partially desorbed due to the interaction of UV light and the TiO₂/dispersant complex. Thus, an enhanced transparency and the absence of color were obtained for well-dispersed TiO₂ nanoparticles in an organic solvent.     

Colloidal platinum in hydrogen-rich water exhibits radical-scavenging activity and improves blood fluidity

The 'colloidal platinum' stabilized with polyvinylpyrrolidone (Pt/PVP-colloid) was dispersed in hydrogen-rich water (HW; hydrogen concentration, 0.82 ppm; oxidation-reduction potential, -583 mV) or regular water (RW; <0.01 ppm, +218 mV). And we evaluated the antioxidant activity of Pt/PVP-colloid in HW or RW on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and improvement of blood fluidity under 2,2'-azobis (2-amidinopropane) dihydrochloride (AAPH)-induced oxidative stress. When applied with the 0.25-0.5 ppm Pt/PVP-colloid in RW or HW, the level of DPPH radicals decreased to 77.5-59.6% or 16.1-5.6%, in contrast to the level as high as 81.3% for HW alone, respectively, as measured by an electron spin resonance method. The horse blood, which was subjected to AAPH-induced oxidative stress, was incubated for 24 hr with RW or HW, and thereafter required 13.7 sec (100%) or 5.7 sec (42.3%) for passing through the micro-channels in a rheology equipment. When treated with 0.5-1.0 ppm Pt/PVP-colloid in RW or HW, the blood passage time in the micro-channels decreased dose-dependently to 9.7-7.3 sec (71.6-53.8%) or 4.3-1.3 sec (32.8-10.3%), and the rate of micro-channels clogged with erythrocyte aggregates decreased to 23.8-21.0% or 15.8-9.8%, respectively, from 42.8% for no addition of Pt/PVP. By scanning electron microscopy, AAPH-treated erythrocytes lost intact surface morphology on the membrane together with protrusions and without hollows, being indicative of impaired transforming ability, and the rate of erythrocyte agglutination was increased to 46.2%. When treated the horse blood with HW alone significantly decreased the rate of erythrocyte agglutination to 29.6%, whereas 1.0 ppm Pt/PVP-colloid in RW or HW decreased it to 24.1% or 21.1%, respectively. Thus, DPPH-radical-scavenging and erythrocyte-protecting effects of Pt/PVP-colloid in HW were superior to those of Pt/PVP-colloid in RW or Pt/PVP-free HW. The results could be mainly attributed to the enhanced antioxidant activity of Pt/PVP in HW, which may be due to captured-hydrogen on platinum.     

Boiling heat transfer of HFO-1234yf flowing in a smooth small-diameter horizontal tube

The flow boiling heat transfer coefficient of the low-GWP (global warming potential) refrigerant HFO-1234yf inside a smooth small-diameter horizontal tube (inner diameter: 2 mm) was experimentally investigated. The local heat transfer coefficient was measured at heat fluxes of 6-24 kW m⁻², mass fluxes of 100-400 kg m⁻² s⁻¹, an evaporating temperature of 288.15 K, and an inlet vapor quality of 0-0.25. The results show that the effect of heat flux on the heat transfer was large at low vapor quality, while the effect of mass flux was large at high vapor quality. The heat transfer coefficient of HFO-1234yf was almost the same as that of R-134a. The heat transfer coefficients calculated based on correlations with Saitoh et al. agreed well with the measured values compared to other correlations. The measured pressure drop agreed well with that predicted by the Lockhart-Martinelli correlation.