Further experimental evidences of the compatibility of poly(vinyl acetate) with poly(ethyl methacrylate) and its dependence on the ratio of the molecular weight of the two homopolymers

Using various fractions of poly(ethyl methacrylate) (PEMA) and poly(vinyl acetate) (PVAc) of very narrow molecular weight distribution, a very wide range of 2–120 of molecular weight ratio M¯_ν PEMA/M¯_ν PVAc, (M¯_ν)_r was obtained. Studies of some tensile mechanical properties of films of the blends produced from solution on mercury confirmed strong dependence of the improvements of PVAc properties for blend with 18% PEMA on (M¯_ν)_r, especially in the range 5 ≤ (M¯_ν)_r < 100. The density of the films of the blend was much higher than those of the individual polymers and increased monotonically with (M¯_ν)_r. Optical micrographs of the films of the blends showed interactions between the two polymers with 18% PEMA composition, which appears to be more intimate as (M¯_ν)_r increases, as further evidence of compatibility and miscibility of the two polymers.     

Comparative study of a variety of ATRP systems with high oxidation state metal catalyst system

MMA (methyl methacrylate) was polymerized in different ATRP systems using the different ligands of HMTETA (1, 1, 4, 7, 10, 10, hexamethyltriethylenetetraamine), TMEDA (N,N,N′,N′-Tetramethylethylenediamine) with copper salts (CuBr/CuBr₂) and EBriB was used as an initiator in toluene at a reaction temperature of 80 °C. Both conventional and a low catalyst to initiator ratios ranging from 1/1 to 0.01/1 were compared in this study. All four of the ATRP methods, such as normal, reverse, AGET and ATRP using a high oxidation state metal complex without any additives, were evaluated at different conditions. The ATRP using a high oxidation state metal system in the absence of a conventional radical initiator like AIBN, which is used in reverse ATRP, or reducing agents such as Sn (EH)₂ in AGET ATRP was a better controlled system in terms of both the catalytic activity and controllability (PDI ∼ 1.2).     

Osteosclerosis due to endemic fluorosis

Endemic water borne fluorosis is a public health problem in Isparta, a city located in southern Turkey. In order to investigate the association between osteosclerosis and fluorosis, we retrospectively screened the results of lumbar spine and femur neck bone mineral density (BMD) of 1500 patients who were examined before, for any reason in between 2001-2003. Sixty nine patients (67 females and 2 males, mean age 52.6+/-10.2) with vertebra T-scores>or=+2 were found only except a patient with osteoid osteoma in the femur neck (femur T-score+6.64). Thirty-four of the patients could be reexamined with lateral vertebra BMD and investigated for fluorosis and the other etiologic causes of osteosclerosis. Of 34 patients, 14 had either mottled tooth enamel or urine fluoride level greater than 1.5 mg/l. Other etiologic causes were hypothyroidism (2), hypoparathyroidism (1), history of lumbar fracture (1), use of retinoids (1), vitamin D (7), oral calcium preparations (9), and bisphosphanates (3). Lateral lumbar vertebral T-score was greater than+2 in 12 patients (35.3%). Femur T-score was greater than+2 in 7 patients (20.6%). Fourteen patients (41.2%) had lateral vertebral or femur T-score>or=+2. Five (35.7%) of these patients had signs of fluorosis, as discussed before. Mean body mass index of individuals with fluorosis was 36.4+/-7.9 and this result was significantly higher than other osteosclerotic subjects (31.6+/-4.4). In conclusion we believe that approximately one third of the osteosclerosis in our region was due to endemic skeletal fluorosis and obesity may enhance this osteosclerotic type bone changes in endemic fluorosis.     

Deposition and Characterization of Si Substituted Cu2ZnSnS4 Thin Films

Silicon - The influence of the Si substitution ratio on the structural, morphological, and optical properties of Cu2ZnSnS4 (CZTS) thin films was examined. The Cu2Zn(SixSn1–x)S4 thin films...     

Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison with dry and MQL machining

There has been significant work on establishing relationships between machining performance and the cutting parameters for various work materials. Recent trends in machining research show that major efforts are being made to understand the impact of various cooling/lubrication methods on machining performance and surface integrity characteristics, all aimed at improving process and product performance. This study presents the experimental results of cryogenic machining of Inconel 718, a high-temperature aerospace alloy, and comparison of its performance in dry and minimum quantity lubrication machining. Experimental data on force components, progressive tool wear parameters such as flank wear, notch wear, crater wear, cutting temperature, chip morphology, and surface roughness/topography of machined samples are presented. New findings show that cryogenic machining is a promising research direction for machining of high-temperature aerospace alloy, Inconel 718, as it offers improved machining performance in terms of reduced tool wear, temperature, and improved surface quality. It was also found that the number of nozzles in cryogenic machining plays a vital role in controlling cutting forces and power consumption in cryogenic machining of Inconel 718.     

Surveillance and prevention of hepatitis B virus transmission

We have demonstrated a microfabricated single-molecule DNA sizing device. This device does not depend on mobility to measure molecule size, is 100 times faster than pulsed-field gel electrophoresis, and has a resolution that improves with increasing DNA length. It also requires a million times less sample than pulsed-field gel electrophoresis and has comparable resolution for large molecules. Here we describe the fabrication and use of the single-molecule DNA sizing device for sizing and sorting DNA restriction digests and ladders spanning 2-200 kbp.     

Characterization of cryogenic heat treated Vanadis 4 PM cold work tool steel

The amount of retained austenite in the quenched cold work tool steel sample is 17.7%, in the condition of sub-zero heat treated and double tempered samples following by quenching is 1.9% determined by XRD analysis. The types of carbides (MC, M₇C₃, M₂₃C₆) present in the structure was determined by XRD and SEM-EDS analysis. The hardness of test samples were 865 HV(0.1) for quenched sample and 785 HV(0.1) forth sample subjected to sub-zero treatment and double tempered after the quenching.     

Comparison of performance and emissions of diesel fuel,rapeseed and soybean oil methyl esters injected at different pressures

Fuel properties of rapeseed oil and soybean oil methyl esters (e.g. density, cetane number and viscosity etc.) are similar to those of the diesel fuel. These methyl esters can be used as diesel engine fuel by mixing withy diesel fuel. In this study a comparison of diesel fuel, the rapeseed oil methyl ester and the soybean oil methyl ester was made from the engine performance and emissions point of view. The tests were carried out with a four-cylinder diesel engine for tree different injection pressures such as 250, 300 and 350 bar with each of these fuels. For the purpose of comparison, tests were also conducted at full load conditions with diesel fuel. As the result, the performance and emission values of rapeseed oil (R) and soybean oil (S) methyl esters were found to be nearly the same with those of diesel fuels (D) when injection pressure was increased to 300 bar.